INJECTION
Operating wiring diagram
17
K7M engine
COMPUTER TRACK ALLOCATION
TrackALLOCATION
1Not used
2Power earth n° 1
3Power earth n° 2
4Command for injector n° 2 and n° 3 via earth
5Air conditioning on - off information and request for compressor operation authorisation
(0 - 12 V)
6Heated windscreen information (0 - 12 V)
7Park / Neutral / torque reduction information (0 - 5 V) (K7M 703)
8Pinking sensor signal
9Stepping motor control (0 - 12 V)
10EGR solenoid valve control (0 - 12 V) (K7M 703)
11Bi-directional diagnostic line K used for entry into fault finding mode
(looking for computer), emission of diagnostic signals from computer, application of command
modes (G..*), erasing the memory (G0**)
and ending fault finding (G13*)
12Vehicle speed information
13Power assisted steering pressostat information
14Not used
15Coolant temperature sensor information
16Manifold pressure information transcribed by absolute pressure sensor
17Voltage information from oxygen sensor
18Earth
19Throttle position potentiometer information
20Air temperature sensor information
21Not used
22Not used
23Not used
24+ 12 V after ignition
17-44
