2007 NISSAN LATIO Service Repair Manual

Page 2401 of 2896

NISSAN LATIO 2007  Service Repair Manual MAINSHAFT AND GEARS
MT-39
D
E
F
G
H
I
J
K
L
MA
B
MT
Revision: June 20062007 Versa
5. Install Tool (A) and suitable tool onto 1st main gear (1), and
remove 1st main gear (1), 1st-2nd synchronizer assem

Page 2402 of 2896

NISSAN LATIO 2007  Service Repair Manual MT-40
MAINSHAFT AND GEARS
Revision: June 20062007 Versa
If any crack, damage, or excessive wear is found on cam face of
baulk ring or working face of insert, replace it.
Bearing
Check items below. If

Page 2403 of 2896

NISSAN LATIO 2007  Service Repair Manual MAINSHAFT AND GEARS
MT-41
D
E
F
G
H
I
J
K
L
MA
B
MT
Revision: June 20062007 Versa
2. Install 1st main gear (1), and 1st-2nd synchronizer assembly (2)
onto the mainshaft.
3. Press-fit the bushing (3) o

Page 2404 of 2896

NISSAN LATIO 2007  Service Repair Manual MT-42
MAINSHAFT AND GEARS
Revision: June 20062007 Versa
8. Press-fit the 5th main gear (1) onto the mainshaft using Tool (A).
9. Press-fit the 6th main gear (1) onto the mainshaft using Tool (A).
10.

Page 2405 of 2896

NISSAN LATIO 2007  Service Repair Manual REVERSE IDLER SHAFT AND GEARS
MT-43
D
E
F
G
H
I
J
K
L
MA
B
MT
Revision: June 20062007 Versa
REVERSE IDLER SHAFT AND GEARSPFP:32281
Disassembly and AssemblyUCS0065F
DISASSEMBLY
1. Remove reverse output

Page 2406 of 2896

NISSAN LATIO 2007  Service Repair Manual MT-44
REVERSE IDLER SHAFT AND GEARS
Revision: June 20062007 Versa
5. Remove needle bearings (1) from reverse idler shaft.
ASSEMBLY
Assembly is in the reverse order of disassembly. Refer to MT-18, "Gea

Page 2407 of 2896

NISSAN LATIO 2007  Service Repair Manual FINAL DRIVE
MT-45
D
E
F
G
H
I
J
K
L
MA
B
MT
Revision: June 20062007 Versa
FINAL DRIVEPFP:38411
Disassembly and AssemblyUCS0065G
DISASSEMBLY
1. Remove differential side bearing inner race (clutch housi

Page 2408 of 2896

NISSAN LATIO 2007  Service Repair Manual MT-46
FINAL DRIVE
Revision: June 20062007 Versa
INSPECTION AFTER DISASSEMBLY
Gear, Washer, Shaft and Case
Check side gears, thrust washer, pinion mate shaft, pinion mate
gears, lock ring and differen