Page 1777 of 2896
EI-12
CLIP AND FASTENER
Revision: June 20062007 Versa
CE107
CE117
CF110
CF118
CG101
CS101 Symbol
No.Shapes Removal & Installation
SBF411HSBF767B
SBF174DSBF175DA
SBF648BSBF649B
SBF151DSBF259G
SBF145BSBF085B
SBF078BSBF992G
Page 1778 of 2896
CLIP AND FASTENER
EI-13
C
D
E
F
G
H
J
K
L
MA
B
EI
Revision: June 20062007 Versa
CR103
Metal ClipSymbol
No.Shapes Removal & Installation
SBF768BSBF770B
WBT072WBT073
Page 1779 of 2896
EI-14
FRONT BUMPER
Revision: June 20062007 Versa
FRONT BUMPERPFP:F2022
Removal and Installation EIS0096K
1. Bumper stay RH 2. Bumper reinforcement (production) 3. Bumper energy absorber
4. Engine undercover 5. Front valance 6. Front bumper fascia
7. Access cover 8. Fog lamp opening finisher (without
fog lamps)9. Fog lamp opening finisher (with fog
lamps)
10. Fog lamp assembly 11. Bumper side retainer 12. Bumper stay LH (service)
LIIA2562E
Page 1780 of 2896

FRONT BUMPER
EI-15
C
D
E
F
G
H
J
K
L
MA
B
EI
Revision: June 20062007 Versa
CAUTION:
Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with
oil.
REMOVAL
1. Open hood.
2. Remove front grille. Refer to EI-19, "
FRONT GRILLE" .
3. Remove front fender protectors RH/LH. Refer to EI-22, "
FENDER PROTECTOR" .
4. Remove front valance and engine undercover.
5. Remove screws of front bumper fascia RH/LH.
6. Pull the outboard edge of front bumper fascia away from vehicle
to disengage from the bumper side retainer.
7. Disconnect fog lamp harness connector RH/LH (if equipped).
8. Remove the front bumper fascia.
9. Remove fog lamp opening finisher and fog lamp assembly RH/
LH (if equipped). Refer to LT-50, "
Removal and Installation" .
10. Remove bumper energy absorber.
11. Remove RH/LH air guide mounting clips of bumper reinforcement.
12. Remove the nuts, then remove bumper reinforcement and bumper stay(s):
For production, bumper stay LH is part of bumper reinforcement.
For service, bumper stay RH/LH are separate assemblies.
13. Remove bumper side bracket RH/LH after front bumper fascia removal.
PIIB2537J
PIIB2538J
PIIB2543J
Page 1781 of 2896
EI-16
FRONT BUMPER
Revision: June 20062007 Versa
INSTALLATION
Installation is in the reverse order of removal.
Page 1782 of 2896
REAR BUMPER
EI-17
C
D
E
F
G
H
J
K
L
MA
B
EI
Revision: June 20062007 Versa
REAR BUMPERPFP:H5022
Removal and InstallationEIS0096L
1. Bumper side bracket 2. Rear bumper closing 3. Spring nut
4. Bumper reinforcement bracket 5. Rear bumper reinforcement 6. Energy absorbing foam
7. Rear bumper fascia 8. Rear bumper upper retainer 9. Clip C205
LIIA2563E
Page 1783 of 2896
EI-18
REAR BUMPER
Revision: June 20062007 Versa
REMOVAL
1. Open back door.
2. Remove rear combination lamp RH/LH. Refer to LT- 8 7 , "
Removal and Installation" .
3. Remove rear bumper fascia lower clips and screws RH/LH.
4. Remove rear fender protector. Refer to EI-22, "
FENDER PROTECTOR" .
5. Pull the rear bumper fascia side outward to disengage the
bumper side bracket.
6. Remove rear bumper fascia upper clips and screws.
7. Release rear bumper upper retainer, then pull rear bumper fas-
cia outward away from rear of vehicle.
8. Disconnect license lamp connector.
9. Remove energy absorbing foam and rear bumper reinforcement.
10. Remove the screws, then remove the rear bumper closing RH/LH and rear bumper fascia.
11. Remove the bumper side bracket (1) RH/LH.
INSTALLATION
Installation is in the reverse order of removal.
LIIA2579E
LIIA2580E
LIIA2581E
Page 1784 of 2896
FRONT GRILLE
EI-19
C
D
E
F
G
H
J
K
L
MA
B
EI
Revision: June 20062007 Versa
FRONT GRILLEPFP:62310
Removal and InstallationEIS0096N
REMOVAL
1. Open hood assembly.
2. Remove the clips, then remove upper radiator cover.
3. Remove the upper clips and release the lower pawls, then pull outward to remove the front grille.
INSTALLATION
Installation is in the reverse order of removal.
LIIA2564E
1. Upper radiator cover 2. Front grille 3. Front bumper fascia
4. Clip C205 Pawl