2001 DODGE TOWN AND COUNTRY Service Manual

heaterinflation pressureTPMS resetseatsflat tiremaintenance schedule
Popular search:
seatsFreeze plugswheel torqueremote controlservice intervalsteering wheel adjustmentheadrest
Previous
Next
Load previous 8 pages

Page 1361 of 2321

DODGE TOWN AND COUNTRY 2001 Service Manual INSTALLATION CRANKSHAFT MAIN BEARINGS (1) Install bearing halves in crankshaft supports. (2) Lubricate crankshaft and main bearings with clean engine oil. (3) Install crankshaft supports on crankshaft

Page 1362 of 2321

DODGE TOWN AND COUNTRY 2001 Service Manual INSTALLATION (1) Clean oil pan and sealing surfaces. Inspect oil pan and engine block. (2) Install oil pan, gasket, and retaining bolts (Fig. 69). (3) Be sure power steering line brackets are in prope

Page 1363 of 2321

DODGE TOWN AND COUNTRY 2001 Service Manual (4) Remove timing belt outer cover (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT / CHAIN COVER(S) - REMOVAL). (5) Remove timing belt (Refer to 9 - ENGINE/ VALVE TIMING/TIMING BELT/CHAIN AND SPROCKETS

Page 1364 of 2321

DODGE TOWN AND COUNTRY 2001 Service Manual (7) Install timing belt (Refer to 9 - ENGINE/ VALVE TIMING/TIMING BELT/CHAIN AND SPROCKETS - INSTALLATION) . (8) Install timing belt outer cover (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT / CHAIN C

Page 1365 of 2321

DODGE TOWN AND COUNTRY 2001 Service Manual INSTALLATION (1) Apply MopartThread Sealant to the switch threads. (2) Install oil pressure switch in engine block. (3) Connect oil pressure switch electrical connector (Fig. 72). (4) Lower vehicle. (

Page 1366 of 2321

DODGE TOWN AND COUNTRY 2001 Service Manual REMOVAL (1) Remove engine oil pan (Refer to 9 - ENGINE/ LUBRICATION/OIL PAN - REMOVAL). (2) Using special tool VM.1054, remove oil pres- sure relief valve from engine block (Fig. 75). INSTALLATION (1)

Page 1367 of 2321

DODGE TOWN AND COUNTRY 2001 Service Manual (7) Remove oil cooler retaining stud and remove oil cooler from engine block (Fig. 78). INSTALLATION (1) Clean oil cooler and engine block sealing sur- faces. (2) Install oil cooler, retaining bolt, a

Page 1368 of 2321

DODGE TOWN AND COUNTRY 2001 Service Manual REMOVAL (1) Raise vehicle on hoist. (2) Remove oil filter cap drain plug and drain oil from oil filter housing (Fig. 80). (3) Remove oil filter cap with suitable oil filter wrench (Fig. 80). (4) Remov
Load next 8 pages
Page:   < prev 1-10 ... 1329-1336 1337-1344 1345-1352 1353-1360 1361-1368 1369-1376 1377-1384 1385-1392 1393-1400 ... 2328 next >
mirror controlsinstrument paneltow barservice resetemergency towingfuel filter location
Popular search:
fuel typebolt patterntiresOil change milescheck engine lightFreeze plugsfuse box diagram