2004 DAEWOO LACETTI Service Repair Manual

lumbar supportTPMSresetremote controlfold seatssteering
Popular search:
sparkReat brakeweightfuel pumptorque convertercoolantadding oil
Previous
Next
Load previous 8 pages

Page 161 of 2643

DAEWOO LACETTI 2004 Service Repair Manual 1.8L DOHC ENGINE MECHANICAL 1C2 – 41 DAEWOO V–121 BL4 14. Connect the MAP sensor connector. 15. Connect the coolant hoses to the throttle body. 16. Connect the IAC valve connector. 17. Connec

Page 162 of 2643

DAEWOO LACETTI 2004 Service Repair Manual 1C2 – 42I1.8L DOHC ENGINE MECHANICAL DAEWOO V–121 BL4 6. Remove the exhaust manifold retaining nuts in the sequence shown. 7. Remove the exhaust manifold. 8. Remove the exhaust manifold gasket.

Page 163 of 2643

DAEWOO LACETTI 2004 Service Repair Manual 1.8L DOHC ENGINE MECHANICAL 1C2 – 43 DAEWOO V–121 BL4 CAMSHAFT GEARS Removal Procedure 1. Disconnect the negative battery cable. 2. Remove the timing belt. Refer to ”Timing Belt” in this s

Page 164 of 2643

DAEWOO LACETTI 2004 Service Repair Manual 1C2 – 44I1.8L DOHC ENGINE MECHANICAL DAEWOO V–121 BL4 3. Install the exhaust camshaft gear. 4. While holding the exhaust camshaft firmly in place, install the exhaust camshaft gear bolt. Tighten

Page 165 of 2643

DAEWOO LACETTI 2004 Service Repair Manual 1.8L DOHC ENGINE MECHANICAL 1C2 – 45 DAEWOO V–121 BL4 6. Remove the timing belt idler pulley bolt and nut. 7. Remove the timing belt idler pulleys. 8. Remove the engine mount retaining bolts.

Page 166 of 2643

DAEWOO LACETTI 2004 Service Repair Manual 1C2 – 46I1.8L DOHC ENGINE MECHANICAL DAEWOO V–121 BL4 7. Install the timing belt automatic tensioner and bolt. 8. Install the camshaft gears. Refer to ”Camshaft Gears” in this section. 9.

Page 167 of 2643

DAEWOO LACETTI 2004 Service Repair Manual 1.8L DOHC ENGINE MECHANICAL 1C2 – 47 DAEWOO V–121 BL4 19. Disconnect the oxygen (O2) sensor connector, if equipped. 20. Disconnect the idle air control (IAC) valve connec- tor. 21. Disconnect

Page 168 of 2643

DAEWOO LACETTI 2004 Service Repair Manual 1C2 – 48I1.8L DOHC ENGINE MECHANICAL DAEWOO V–121 BL4 40. Remove the crankshaft pulley bolts. 41. Remove the crankshaft pulley. 42. Disconnect the vacuum lines at the charcoal canis- ter purge
Load next 8 pages
Page:   < prev 1-10 ... 129-136 137-144 145-152 153-160 161-168 169-176 177-184 185-192 193-200 ... 2648 next >
batterypower steeringdoor lockbolt patternsteeringrims
Popular search:
battery locationsteering wheel adjustmentheadlampchargingoverheatingspark plugs replacedifferential