2001 LAND ROVER FREELANDER Workshop Manual

Page 89 of 1007

LAND ROVER FREELANDER 2001  Workshop Manual GENERAL DATA
04-26
Rear Axle and Final Drive
Rear Axle
Type Hypoid gear, centreline of drive pinion below centre of ring gear
Differential carrier material Aluminium
Ring gear to Pinion gear backlash

Page 90 of 1007

LAND ROVER FREELANDER 2001  Workshop Manual GENERAL DATA
04-27
Steering
* The steering geometry settings are given in degrees and minutes, decimal parts of a degree and millimetres. 
Steering and suspension geometry settings are for a vehicle a

Page 91 of 1007

LAND ROVER FREELANDER 2001  Workshop Manual GENERAL DATA
04-28
Front Suspension
Type Independent, MacPherson struts with coil springs, lower "L" shaped 
arms and anti-roll bar
Nominal height to wheel arch from hub centre* 453 mm (17.83 in)
Road

Page 92 of 1007

LAND ROVER FREELANDER 2001  Workshop Manual GENERAL DATA
04-29
From 04MY: Models with Sports Suspension .
⇒ Colour code GREY / ORANGE
⇒ Total coils 5.5
⇒ Active coils 5.5
⇒ Wire diameter 15.5
⇒ Free length 308.5
Anti-roll bar diameter

Page 93 of 1007

LAND ROVER FREELANDER 2001  Workshop Manual GENERAL DATA
04-30
Rear Suspension
* At unladen weight
Type Independent, MacPherson struts with coil springs and lower 
"trapezoidal links"
All models, except those with Sports 
Suspension:Nominal hei

Page 94 of 1007

LAND ROVER FREELANDER 2001  Workshop Manual GENERAL DATA
04-31
Brakes
Front disc brakes
Type Pin-slider caliper with ventilated disc, self-adjusting
Disc diameter 262 mm (10.31 in)
Disc thickness:
⇒ New
⇒ Service limit20.8 - 21.00 mm (0.818

Page 95 of 1007

LAND ROVER FREELANDER 2001  Workshop Manual GENERAL DATA
04-32
Wheels and tyres
Tyre pressures
Wheel type and size:
⇒ Standard 51/2 J x 15" steel
⇒ Option 51/2 J x 15" alloy
⇒ Option 6.0 J x 16" alloy
⇒ Option 6.0 J x 16" alloy
Tyre siz

Page 96 of 1007

LAND ROVER FREELANDER 2001  Workshop Manual GENERAL DATA
04-33
Heating and Ventilation
Air Conditioning
PTC heater - Td4 engine - if fitted
⇒ Make/Type Catem, 900 Watt output, 12 volt supply, located in Hevac unit
FBH - Td4 engine - if fitted