2001 LAND ROVER FREELANDER Workshop Manual

TORQUE WRENCH SETTINGS
06-18
Clutch
† Tighten in diagonal sequence
TORQUE DESCRIPTION METRIC IMPERIAL
Clutch assembly to flywheel Allen screws
† 25 Nm 18 lbf.ft
Clutch slave cylinder mounting bracket to gearbox bolts 25 Nm 18 lbf.ft
Inertia switch bolt8 Nm 6 lbf.ft
Pressure plate to flywheel Torx bolts
†25 Nm 18 lbf.ft

TORQUE WRENCH SETTINGS
06-19
Manual Gearbox – PG1
+ Apply sealant, Part No. STC 50552 to threads of 2 top bolts
TORQUE DESCRIPTION METRIC IMPERIAL
Clutch slave cylinder mounting bracket to gearbox bolts 25 Nm 18 lbf.ft
Drain plug35 Nm 26 lbf.ft
Filler / level plug35 Nm 26 lbf.ft
1st. gear switch24 Nm 18 lbf.ft
Front cover plate to gearbox bolt and nut 9 Nm 7 lbf.ft
Gearbox to engine bolts
+80 Nm 59 lbf.ft
Gearbox to sump bolts 45 Nm 33 lbf.ft
Gear change steady rod to mounting bracket bolt 25 Nm 18 lbf.ft
Lifting bracket to gearbox bolt 45 Nm 33 lbf.ft
LH engine mounting to gearbox bolts 65 Nm 48 lbf.ft
LH engine mounting to gearbox bolts 80 Nm 59 lbf.ft
Reverse light switch 24 Nm 18 lbf.ft

TORQUE WRENCH SETTINGS
06-20
Manual Gearbox – Getrag
+ Apply sealant, Part No. STC 4600 to threads
TORQUE DESCRIPTION METRIC IMPERIAL
Earth lead to gearbox bolt 25 Nm 18 lbf.ft
Engine LH mounting to body bolts (KV6) 48 Nm 35 lbf.ft
1st gear switch to gearbox 24 Nm 18 lbf.ft
Gearbox drain plug 35 Nm 26 lbf.ft
Gearbox casing end cover Torx bolts 25 Nm 18 lbf.ft
Gearbox filler / level plug 35 Nm 26 lbf.ft
Gearbox closing plate bolts 10 Nm 7 lbf.ft
Gearbox to engine bolts 85 Nm 63 lbf.ft
Gearbox to LH engine mounting bolts (KV6) 85 Nm 63 lbf.ft
Gear change cover bolts 25 Nm 18 lbf.ft
Gearbox mounting bracket to gearbox bolts 85 Nm 63 lbf.ft
Gearbox mounting bracket to gearbox bolts 100 Nm 74 lbf.ft
Gearbox mounting bracket to LH engine mounting through bolt 100 Nm 74 lbf.ft
Gearbox to engine bolts 85 Nm 63 lbf.ft
Gearbox rear cover Torx bolts
+25 Nm 18 lbf.ft
Gear change cover to selector shaft Torx bolts
+25 Nm 18 lbf.ft
LH engine mounting to gearbox bracket bolts 100 Nm 74 lbf.ft
Release bearing sleeve bolts 12 Nm 9 lbf.ft
Reverse lamp switch to gearbox 24 Nm 18 lbf.ft

TORQUE WRENCH SETTINGS
06-21
Intermediate Reduction Drive
+ Apply sealant, Part No. STC 4600 to threads
TORQUE DESCRIPTION METRIC IMPERIAL
Drain plug35 Nm 26 lbf.ft
Exhaust heatshield to exhaust mounting bracket 45 Nm 33 lbf.ft
Exhaust heatshield to IRD screws (Td4) 30 Nm 22 lbf.ft
Exhaust heatshield to IRD nut (K1.8 and KV6) 45 Nm 33 lbf.ft
Filler / level plug35 Nm 26 lbf.ft
IRD unit to gearbox bolts 90 Nm 66 lbf.ft
IRD end cover bolts
+30 Nm 22 lbf.ft
IRD support bracket to cylinder block bolt (K1.8) 48 Nm 35 lbf.ft
IRD support bracket to cylinder block bolt (K1.8) 48 Nm 35 lbf.ft
IRD support bracket to IRD bolts (Td4)
⇒ M8
⇒ M1030 Nm
50 Nm22 lbf.ft
37 lbf.ft
IRD support bracket to IRD bolts (K1.8 and KV6) 50 Nm 37 lbf.ft
IRD support bracket to sump (K1.8 and KV6) 88 Nm 65 lbf.ft
Lower engine steady to IRD support bracket bolts 100 Nm 74 lbf.ft
Manifold heatshield to IRD support bracket bolts (K1.8 and KV6) 9 Nm 6.5 lbf.ft
Manifold heatshield to IRD support bracket bolts (K1.8 and KV6) 25 Nm 18 lbf.ft
Manifold heatshield to pinion housing nut (KV6) 45 Nm 33 lbf.ft
Manifold heatshield to IRD (Td4) 30 Nm 22 lbf.ft
Breather pipe bracket screw 9 Nm 7 lbf.ft
Mass damper to pinion housing nuts (K1.8) 25 Nm 18 lbf.ft
Pinion nut150 Nm 111 lbf.ft
Pinion housing nuts 25 Nm 18 lbf.ft
Propeller shaft to IRD flange bolts 40 Nm 30 lbf.ft

TORQUE WRENCH SETTINGS
06-22
Automatic Gearbox – Jatco
†Tighten in sequence.
+ Apply sealant, Part No. STC 4600 to threads
TORQUE DESCRIPTION METRIC IMPERIAL
Air blast cooler assembly to chassis bolts:
⇒ Lower10 Nm 7.5 lbf.ft
⇒ Upper5 Nm 3.5 lbf.ft
Air blast cooler fan cowl to matrix bolts 5 Nm 3.5 lbf.ft
Air blast cooler fan motor to cowl bolts 5 Nm 3.5 lbf.ft
Air blast cooler multiplug mounting bracket nut 10 Nm 7.5 lbf.ft
Air blast cooler pipe union nuts 25 Nm 18 lbf.ft
Crankshaft Position (CKP) Sensor 9 Nm 7 lbf.ft
Closing panel to gearbox panel bolt 10 Nm 7.5 lbf.ft
Drive plate to converter bolts 45 Nm 33 lbf.ft
Earth lead to gearbox housing bolt 25 Nm 18 lbf.ft
Fluid cooler to mounting bracket bolts (KV6) 25 Nm 18 lbf.ft
Fluid cooler mounting bracket bolts (KV6):
⇒ M825 Nm 18 lbf.ft
⇒ M1285 Nm 63 lbf.ft
Fluid cooler mounting bolts (Td4):
⇒ 2 off45 Nm 33 lbf.ft
⇒ 1 off25 Nm 18 lbf.ft
Fluid cooler hoses to gearbox 18 Nm 13 lbf.ft
Fluid cooler hose unions 18 Nm 13 lbf.ft
Fluid pan bolts
† +7 Nm 5 lbf.ft
Gearbox closing plate bolt (Td4) 10 Nm 7.5 lbf.ft
Gearbox drain plug 45 Nm 33 lbf.ft
Gearbox level plug 14 Nm 10 lbf.ft
Gearbox housing to sump 85 Nm 63 lbf.ft
Gearbox to engine bolts 85 Nm 63 lbf.ft
Gearbox mounting bracket bolts 85 Nm 63 lbf.ft
Gearbox mounting through bolt 100 Nm 74 lbf.ft
Inhibitor switch bolts 3 Nm 2.2 lbf.ft
IRD cooling hose retainer bolt (KV6) 25 Nm 18 lbf.ft
IRD support bracket mounting bolts
† (KV6) 50 Nm 37 lbf.ft
IRD support bracket to engine front mounting bracket bolts
† (KV6) 50 Nm 37 lbf.ft
IRD support bracket to sump bolts
† (KV6) 45 Nm 33 lbf.ft
IRD to gearbox bolts (KV6) 80 Nm 59 lbf.ft
Manifold heatshield to IRD support bracket (KV6):
⇒ Bolts9 Nm 7 lbf.ft
⇒ Nut45 Nm 33 lbf.ft
Manifold heatshield to IRD pinion housing nut (KV6) 25 Nm 18 lbf.ft
Selector housing nuts 10 Nm 7.5 lbf.ft
Selector cable trunnion nut 6 Nm 4.5 lbf.ft
Selector lever to gearbox selector shaft nut 25 Nm 18 lbf.ft
Starter motor to gearbox bolts 45 Nm 33 lbf.ft
Torque converter access plate bolts 9 Nm 7 lbf.ft

TORQUE WRENCH SETTINGS
06-23
Driveshafts
1 Tighten with weight of vehicle on suspension
TORQUE DESCRIPTION METRIC IMPERIAL
Adjustable transverse link to subframe nut and bolt
1120 Nm 89 lbf.ft
Adjustable transverse link to subframe nut and bolt
1120 Nm 89 lbf.ft
Fixed transverse link to subframe nut and bolt 120 Nm 89 lbf.ft
Front propeller shaft to IRD flange bolts and nuts 40 Nm 30 lbf.ft
Front propeller shaft to viscous coupling bolt 65 Nm 48 lbf.ft
Handbrake cable clip to subframe bolt 22 Nm 16 lbf.ft
Propeller shaft to IRD flange nuts and bolts 40 Nm 30 lbf.ft
Propeller shaft to rear axle nuts and bolt 65 Nm 48 lbf.ft
Propeller shaft to viscous coupling nuts and bolts 65 Nm 48 lbf.ft
Viscous coupling support bearing bolts 28 Nm 21 lbf.ft

TORQUE WRENCH SETTINGS
06-24
Rear Axles and Final Drive
+ Apply sealant, Part No. STC 50552 to threads
TORQUE DESCRIPTION METRIC IMPERIAL
Rear differential pinion nut:
⇒ Initial tightening190 Nm 140 lbf.ft
⇒ Maximum373 Nm 275 lbf.ft
Rear cover to differential casing bolts
+25 Nm 18 lbf.ft
Rear differential to front mounting bolts 65 Nm 48 lbf.ft
Rear differential front mounting bush to subframe bolt 120 Nm 89 lbf.ft
Rear differential to rear mounting bolts 65 Nm 48 lbf.ft
Rear differential oil plug 27 Nm 20 lbf.ft
Trailing link to rear hub nut and bolt 120 Nm 89 lbf.ft

TORQUE WRENCH SETTINGS
06-25
Steering
* Tighten with weight of vehicle on suspension
TORQUE DESCRIPTION METRIC IMPERIAL
Ball joint to steering arm nuts 55 Nm 41 lbf.ft
Coolant rail to cylinder block bolts (KV6) 9 Nm 7 lbf.ft
Gear change linkage to bulkhead bolts (Td4 manual) 25 Nm 18 lbf.ft
Heatshield nuts (KV6) 25 Nm 18 lbf.ft
Interlock cable to column lock union (JATCO) 4 Nm 3 lbf.ft
IRD hose clip bolt (Td4) 25 Nm 18 lbf.ft
Key cable clamp bolt (JATCO) 6 Nm 4.5 lbf.ft
PAS pipe clip to engine lifting eye bolt 10 Nm 7.5 lbf.ft
PAS high pressure pipe clip bolt 8 Nm 6 lbf.ft
PAS fluid pipe bracket bolts 10 Nm 7.5 lbf. ft
PAS outlet hose to pump banjo bolt (KV6 & K1.8) 20 Nm 15 lbf.ft
PAS outlet hose to pump banjo bolt (Td4) 25 Nm 18 lbf.ft
PAS outlet pipe clip bolt 22 Nm 16 lbf.ft
PAS pipe to clamp bolt 22 Nm 16 lbf. ft
PAS pipe to engine front mounting plate bolt (KV6) 25 Nm 18 lbf.ft
PAS pipe support bracket to RH hydramount nut (KV6) 85 Nm 63 lbf.ft
PAS pipe to RH turret clip bolt 10 Nm 7.5 lbf.ft
PAS pump high pressure pipe union 25 Nm 18 lbf.ft
PAS pump pulley bolts 10 Nm 7.5 lbf.ft
PAS pump to mounting bracket bolts (KV6 & K1.8) 25 Nm 18 lbf.ft
PAS pump to mounting bracket bolts (Td4):
⇒ M610 Nm 7.5 lbf.ft
⇒ M825 Nm 18 lbf.ft
PAS pump mounting to cylinder block bolts 45 Nm 33 lbf.ft
PAS rack fluid feed pipe union nut 18 Nm 13 lbf. ft
PAS rack fluid return pipe union nut 22 Nm 16 lbf. ft
PAS rack mounting and clamp to bulkhead bolts 45 Nm 33 lbf. ft
Ram feed pipe union nuts:
⇒ Small (6mm) diameter 18 Nm 13 lbf.ft
⇒ Large (10 mm) diameter 24 Nm 18 lbf.ft
Steering column height adjuster clamp bolt and nut 10 Nm 7.5 lbf.ft
Steering column height adjuster clamp bolt and nut 12 Nm 9 lbf.ft
Steering column bracket side support bolt 10 Nm 7.5 lbf.ft
Steering column lock bolt SHEAR
Steering column to fascia support rail (Nyloc) nuts and bolts 14 Nm 10 lbf.ft
Steering column to PAS rack pinion clamp pinch bolt
132 Nm 24 lbf. ft
Steering wheel nut 45 Nm 33 lbf.ft
Track-rod ends to steering arm nuts 55 Nm 41 lbf.ft
Track-rod end pinch bolt * 28 Nm 21 lbf.ft
Track-rod to rack bolts 100 Nm 74 lbf.ft
Turnbuckle lock nuts 90 Nm 66 lbf.ft