2001 LAND ROVER FREELANDER Workshop Manual

BODY DIMENSIONS
77-1-10 BODY DIMENSIONS
Front end point to point information
Item From To Length
A Headlamp fixing Wing, forward fixing 150 (5.905)
B Headlamp fixing Wing, rear fixing 1507.7 (59.358)
C Wing, forward fixing `LH` Wing, forward fixing `RH` 1338 (13.307)
D Headlamp fixing Spring location, inboard hole 520.1 (20.476)
E Spring location, inboard hole Headlamp fixing 1239.9 (48.814)
F Spring location, inboard hole Wing, rear fixing 300.8 (11.842)
G Spring location, inboard hole `LH` Spring location, inboard hole `RH` 1029.8 (40.543)
H Wing, rear fixing `LH` Wing, rear fixing `RH` 1380 (54.330)

BODY DIMENSIONS
BODY DIMENSIONS 77-1-11
Front and side information
Item From To Length
A Wing, rear fixing Top corner, on bodyside panel 1532.7 (60.342)
B Top corner, on bodyside panel `LH` Top corner, on bodyside panel `RH` 1045.8 (41.173)
C Top hinge fixing, rear hole Door striker, top fixing 1228.2 (48.354)
D Bottom hinge fixing, rear hole Door striker, top fixing 1268.1 (49.925)

BODY DIMENSIONS
77-1-12 BODY DIMENSIONS
Rear end information
Item From To Length
A Top corner, on bodyside panel `LH` Top corner, on bodyside panel `RH` 980 (38.582)
B Top corner, on bodyside panel Bottom corner, on bodyside panel 1684.5 (66.318)
C Bottom corner, on bodyside panel `LH` Bottom corner, on bodyside panel `RH` 1349 (53.110)

BODY DIMENSIONS
BODY DIMENSIONS 77-1-13
Side information
Item From To Length
A 'A' post, top hinge, rear fixing hole 'B/C' post, top hinge, top fixing hole 1007.7 (39.673)
B 'A' post, top hinge, rear fixing hole 'B/C' post, bottom hinge, front fixing hole 1026.4 (40.409)
C 'A' post, bottom hinge, rear fixing hole 'B/C' post, top hinge, top fixing hole 1088.4 (42.850)
D 'A' post, bottom hinge, rear fixing hole 'B/C' post, bottom hinge, front fixing hole 980.4 (38.598)
E 'B/C' post, top hinge, rear fixing hole 'D' post, door striker, top fixing hole 828.7 (32.625)
F 'B/C' post, bottom hinge, rear fixing hole 'D' post, door striker, top fixing hole 916.5 (36.082)

BODY DIMENSIONS
77-1-14 BODY DIMENSIONS
Rear end information
Item From To Length
A Waist rail reinforcement Rear header 975.3 (38.397)
B Rear bodyside `LH` Rear bodyside `RH` 1258.1 (49.531)

BODY DIMENSIONS
BODY DIMENSIONS 77-1-15
Rear floor information
Item From To Length
A Front seat, rear mounting hole Spring location, rear fixing hole 1350 (53.149)
B Front seat, rear mounting hole `LH` Front seat, rear mounting hole `RH` 1298 (51.102)
C Spring location, rear fixing hole `LH` Spring location, rear fixing hole `RH` 1220 (48.031)
D Front seat, rear mounting hole `LH` Front seat, rear mounting hole `RH` 1846 (72.677)

BODY DIMENSIONS
BODY GAPS AND PROFILES 77-1-17
BODY GAPS AND PROF ILE S
Gap and Profile Measurements
The following information is to be used as a guide to assist the technician in refitting exterior body panels and trim
items so as to achieve a correctly aligned vehicle.
Measurements shown are in millimeters and inches. The measurements shown in brackets are in inches.
Gap a - Bonnet to headlamp. Even gaps side to side, tolerance ± 1.0 mm (0.040).
Gap b - Bonnet to bumper overrider. Even gaps side to side, tolerance ± 1.0 mm (0.040).
Gap c - Headlamp to bumper overrider. Visually even gaps within 2.0 mm (0.080).