2001 LAND ROVER FREELANDER Workshop Manual

WIPERS AND WASHERS
REPAIRS 84-1
WIPERS AND WASHERS REPAIRS
Reservoir - washer
$% 84.10.01
Remove
1.Remove front bumper.

+ EXTERIOR FITTINGS, REPAIRS,
Bumper - assembly - front - up to 04MY.
2.Position container to collect fluid loss.
3.Remove 2 nuts securing reservoir filler neck
and remove filler neck.
4.Release both washer pumps from reservoir.
5.Remove and discard pump sealing grommets.
6.Remove 3 bolts securing washer reservoir and
remove.Refit
1.Fit reservoir and secure with bolts.
2.Fit new pump sealing grommets to reservoir.
3.Fit pumps to reservoir.
4.Fit filler neck and secure with nuts.
5.Fit front bumper.

+ EXTERIOR FITTINGS, REPAIRS,
Bumper - assembly - front - up to 04MY.

WIPERS AND WASHERS
84-2 REPAIRS
Jet - washer - each
$% 84.10.08
Remove
1.Disconnect tube from washer jet.
2.Depress plastic lugs and remove washer jet
from bonnet.
Refit
1.Fit washer jet to bonnet and connect tube.
2.Adjust jet so the inside spray is to centre of the
screen, and the outer spray is to the top of the
screen.
Pump - washer
$% 84.10.21
Remove
1.Remove front bumper.

+ EXTERIOR FITTINGS, REPAIRS,
Bumper - assembly - front - up to 04MY.
2.Position container to catch windscreen washer
fluid.
3.Disconnect multiplug and hose from
windscreen washer pump.
4.Release pump from reservoir.
5.Remove and discard pump sealing grommet.
Refit
1.Fit new pump sealing grommet to reservoir.
2.Fit pump to reservoir.
3.Connect hose and multiplug to pump.
4.Fit front bumper.

+ EXTERIOR FITTINGS, REPAIRS,
Bumper - assembly - front - up to 04MY.

WIPERS AND WASHERS
REPAIRS 84-3
Arm - wiper - each
$% 84.15.02
Remove
1.Remove nut cover on wiper arm and remove
nut.
2.Remove wiper arm from spindle.
NOTE: Do not carry out further dismantling if
component is removed for access only.
3.Remove wiper blade.

+ WIPERS AND WASHERS, REPAIRS,
Blade - wiper - each.
Refit
1.Fit wiper blade.

+ WIPERS AND WASHERS, REPAIRS,
Blade - wiper - each.
2.Fit wiper arm to spindle, with tip of wiper blade
aligned to screen marks.
3.Fit nut and tighten to 18 Nm (13 lbf.ft).
Blade - wiper - each
$% 84.15.06
Remove
1.Lift wiper arm from screen.
2.Press retaining lever.
3.Slide blade down arm and withdraw.
Refit
1.Position new blade to wiper arm.
2.Push blade into engagement with arm, and
check blade is retained.
3.Lower arm onto screen.

WIPERS AND WASHERS
84-4 REPAIRS
Motor & linkage - wiper
$% 84.15.11
Remove
1.Remove air intake moulding.

+ HEATING AND VENTILATION,
REPAIRS, Plenum - air intake.
2.Disconnect multiplug from windscreen wiper
motor.
3.Remove 3 bolts securing wiper motor and
linkage to body and remove wiper motor and
linkage.
Refit
1.Fit motor and linkage to body, fit bolts and
tighten to 5 Nm (3.5 lbf.ft).
2.Connect multiplug to windscreen wiper motor.
3.Fit air intake moulding.

+ HEATING AND VENTILATION,
REPAIRS, Plenum - air intake.
Switch - wiper/washer
$% 84.15.34
Remove
1.Remove rotary coupler.

+ RESTRAINT SYSTEMS, REPAIRS,
Rotary coupler - (SRS) air bag system.
2.Disconnect multiplug from washer and wiper
switch.
3.Release multiplug connector from switch base
on steering column.
4.Disconnect multiplug from connector.
5.Remove 2 screws from wiper switch.
6.Depress retaining tag and remove switch.
Refit
1.Fit washer and wiper switch assembly and
secure with screws.
2.Connect multiplugs to switch.
3.Secure multiplug to steering column.
4.Fit rotary coupler.

+ RESTRAINT SYSTEMS, REPAIRS,
Rotary coupler - (SRS) air bag system.

WIPERS AND WASHERS
REPAIRS 84-5
Pump - washer
$% 84.30.21
Remove
1.Remove front bumper.

+ EXTERIOR FITTINGS, REPAIRS,
Bumper - assembly - front - up to 04MY.
2.Position container to catch windscreen washer
fluid.
3.Disconnect multiplug from washer pump.
4.Release hose from pump.
5.Remove washer pump from reservoir and
remove and discard pump seal.
Refit
1.Fit new pump sealing grommet to reservoir.
2.Fit pump to reservoir.
3.Connect hose and multiplug to pump.
4.Fit front bumper.

+ EXTERIOR FITTINGS, REPAIRS,
Bumper - assembly - front - up to 04MY.
Arm - wiper
$% 84.35.01
Remove
1.Remove wiper blade.

+ WIPERS AND WASHERS, REPAIRS,
Blade - wiper.
2.Remove spare wheel mounting bracket.

+ EXTERIOR FITTINGS, REPAIRS,
Bracket - spare wheel mounting.
3.Raise nut cover on wiper arm and remove nut.
4.Release washer jet tube and remove wiper
arm.
NOTE: Do not carry out further dismantling if
component is removed for access only.
5.Release washer jet and washer jet tube from
wiper arm.
Refit
1.Position and secure washer tube and jet to
wiper arm.
2.Position wiper arm to tail door and connect
washer tube.
3.Set wiper arm with tip contacting joint line
between waist seal and rear door. Fit and
tighten wiper arm nut to 13 Nm (10 lbf.ft).
4.Fit wiper blade.

+ WIPERS AND WASHERS, REPAIRS,
Blade - wiper.
5.Fit spare wheel mounting bracket.

+ EXTERIOR FITTINGS, REPAIRS,
Bracket - spare wheel mounting.

WIPERS AND WASHERS
84-6 REPAIRS
Blade - wiper
$% 84.35.02
Remove
1.Lift wiper arm from tail door glass.
2.Remove wiper blade from arm.Refit
1.Position new blade to wiper arm.
2.Secure blade in retainer.
3.Position blade to glass.

WIPERS AND WASHERS
REPAIRS 84-7
Motor - wiper
$% 84.35.12
Remove
1.Remove rear wiper arm.

+ WIPERS AND WASHERS, REPAIRS,
Arm - wiper.
2.Remove tail door plastic sheet.

+ DOORS, REPAIRS, Plastic sheet -
tail door.
3.Remove spindle nut and flat washer and
discard rubber seal.
4.Disconnect multiplug from rear wiper motor.
5.Remove 2 bolts securing wiper motor to tail
door.
6.Remove wiper motor.
NOTE: Do not carry out further dismantling if
component is removed for access only.7.Remove and discard spindle sealing washer.
8.Remove motor water shield.
9.Remove 3 bolts securing mounting plate to
wiper motor.
10.Release multiplug and remove mounting plate.
Refit
1.Position mounting plate, tighten bolts and
secure multiplug.
2.Fit motor water shield and new sealing washer
to spindle.
3.Fit wiper motor and tighten bolts to 5 Nm (3.5
lbf.ft).
4.Connect multiplug to rear wiper motor.
5.Fit NEW rubber seal to wiper motor spindle.
6.Fit flat washer and tighten spindle nut to 5 Nm
(3.5 lbf.ft).
7.Fit tail door plastic sheet.

+ DOORS, REPAIRS, Plastic sheet -
tail door.
8.Fit wiper arm.

+ WIPERS AND WASHERS, REPAIRS,
Arm - wiper.