2005 MERCEDES-BENZ SPRINTER Service Repair Manual

SENDING UNIT / SENSOR -
DESCRIPTION, FUEL LEVEL............14-15
SENDING UNIT / SENSOR -
INSTALLATION, FUEL LEVEL............14-15
SENDING UNIT / SENSOR - REMOVAL,
FUEL LEVEL.........................14-15
SENSITIVE DEVICES - STANDARD
PROCEDURE, ELECTROSTATIC
DISCHARGE (ESD).................8W-01-7
SENSOR - DESCRIPTION, ACCELERATOR
PEDAL POSITION....................14-17
SENSOR - DESCRIPTION, AIR OUTLET
TEMPERATURE......................24-14
SENSOR - DESCRIPTION, AMBIENT
TEMPERATURE......................24-15
SENSOR - DESCRIPTION, BOOST
PRESSURE.........................14-17
SENSOR - DESCRIPTION, CAMSHAFT
POSITION..........................14-19
SENSOR - DESCRIPTION, CRANKSHAFT
POSITION..........................14-20
SENSOR - DESCRIPTION, ENGINE
COOLANT TEMP......................7-14
SENSOR - DESCRIPTION, EVAPORATOR
TEMPERATURE.................24-17,24-25
SENSOR - DESCRIPTION, FUEL LEVEL
SENDING UNIT......................14-15
SENSOR - DESCRIPTION, FUEL
TEMPERATURE......................14-29
SENSOR - DESCRIPTION, HEATED SEAT . . . 8G-4
SENSOR - DESCRIPTION, IN-CAR
TEMPERATURE......................24-19
SENSOR - DESCRIPTION, INLET AIR
TEMPERATURE........................14-29
SENSOR - DESCRIPTION, MANIFOLD AIR
FLOW (MAF)........................14-30
SENSOR - DESCRIPTION, OIL
TEMPERATURE.......................9-56
SENSOR - DESCRIPTION, TEMPERATURE . 24-30
SENSOR - DESCRIPTION,
TRANSMISSION TEMPERATURE........21-140
SENSOR - DESCRIPTION, WATER IN
FUEL..............................14-16
SENSOR - DIAGNOSIS AND TESTING,
BOOST PRESSURE...................14-18
SENSOR - DIAGNOSIS AND TESTING,
EVAPORATOR TEMPERATURE...........24-26
SENSOR - DIAGNOSIS AND TESTING,
HEATED SEAT ........................8G-4
SENSOR - DIAGNOSIS AND TESTING,
IN-CAR TEMPERATURE................24-19
SENSOR - DIAGNOSIS AND TESTING,
TEMPERATURE......................24-30
SENSOR - INSTALLATION, AIR OUTLET
TEMPERATURE......................24-15
SENSOR - INSTALLATION, AMBIENT
TEMPERATURE......................24-16
SENSOR - INSTALLATION, BOOST
PRESSURE.........................14-18
SENSOR - INSTALLATION, CAMSHAFT
POSITION..........................14-19
SENSOR - INSTALLATION, COOLANT
LEVEL..............................7-13
SENSOR - INSTALLATION, CRANKSHAFT
POSITION..........................14-20
SENSOR - INSTALLATION, DOME
LAMP/INTRUSION....................8L-31
SENSOR - INSTALLATION, ENGINE
COOLANT TEMP......................7-15
SENSOR - INSTALLATION, EVAPORATOR
TEMPERATURE.................24-18,24-26
SENSOR - INSTALLATION, FRONT
WHEEL SPEED........................5-30
SENSOR - INSTALLATION, FUEL LEVEL
SENDING UNIT......................14-15
SENSOR - INSTALLATION, FUEL
TEMPERATURE......................14-29
SENSOR - INSTALLATION, INLET AIR
TEMPERATURE......................14-30
SENSOR - INSTALLATION, INTRUSION
....8Q-2
SENSOR - INSTALLATION, MANIFOLD
AIR FLOW (MAF)
.....................14-31
SENSOR - INSTALLATION, OIL
TEMPERATURE
.......................9-57
SENSOR - INSTALLATION, REAR WHEEL
SPEED
..............................5-31
SENSOR - INSTALLATION,
TEMPERATURE
......................24-30SENSOR - OPERATION, AIR OUTLET
TEMPERATURE......................24-15
SENSOR - OPERATION, AMBIENT
TEMPERATURE......................24-15
SENSOR - OPERATION, BOOST
PRESSURE.........................14-18
SENSOR - OPERATION, CAMSHAFT
POSITION..........................14-19
SENSOR - OPERATION, CRANKSHAFT
POSITION..........................14-20
SENSOR - OPERATION, EVAPORATOR
TEMPERATURE.................24-18,24-26
SENSOR - OPERATION, FUEL
TEMPERATURE......................14-29
SENSOR - OPERATION, IN-CAR
TEMPERATURE......................24-19
SENSOR - OPERATION, INLET AIR
TEMPERATURE......................14-29
SENSOR - OPERATION, MANIFOLD AIR
FLOW (MAF)........................14-30
SENSOR - OPERATION, OIL
TEMPERATURE.......................9-56
SENSOR - OPERATION, TEMPERATURE . . . 24-30
SENSOR - OPERATION, TRANSMISSION
TEMPERATURE.....................21-141
SENSOR - OPERATION, WATER IN FUEL . . 14-16
SENSOR - REMOVAL, AIR OUTLET
TEMPERATURE......................24-15
SENSOR - REMOVAL, AMBIENT
TEMPERATURE......................24-15
SENSOR - REMOVAL, BOOST PRESSURE . . 14-18
SENSOR - REMOVAL, CAMSHAFT
POSITION............................14-19
SENSOR - REMOVAL, COOLANT LEVEL....7-13
SENSOR - REMOVAL, CRANKSHAFT
POSITION..........................14-20
SENSOR - REMOVAL, DOME LAMP/
INTRUSION.........................8L-31
SENSOR - REMOVAL, ENGINE COOLANT
TEMP...............................7-14
SENSOR - REMOVAL, EVAPORATOR
TEMPERATURE.................24-18,24-26
SENSOR - REMOVAL, FRONT WHEEL
SPEED..............................5-30
SENSOR - REMOVAL, FUEL LEVEL
SENDING UNIT......................14-15
SENSOR - REMOVAL, FUEL
TEMPERATURE......................14-29
SENSOR - REMOVAL, IN-CAR
TEMPERATURE......................24-19
SENSOR - REMOVAL, INLET AIR
TEMPERATURE......................14-30
SENSOR - REMOVAL, INTRUSION........8Q-2
SENSOR - REMOVAL, MANIFOLD AIR
FLOW (MAF)........................14-31
SENSOR - REMOVAL, OIL
TEMPERATURE.......................9-57
SENSOR - REMOVAL, REAR WHEEL
SPEED..............................5-30
SENSOR - REMOVAL, TEMPERATURE....24-30
SENSOR BULB - INSTALLATION, DOME
LAMP/INTRUSION....................8L-30
SENSOR BULB - REMOVAL, DOME
LAMP/INTRUSION....................8L-30
SENSORS - DESCRIPTION, INPUT SPEED . 21-119
SENSORS - OPERATION, INPUT SPEED . . 21-119
SENTRY KEY REMOTE ENTRY MODULE -
DESCRIPTION........................8Q-2
SENTRY KEY REMOTE ENTRY MODULE -
INSTALLATION.......................8Q-4
SENTRY KEY REMOTE ENTRY MODULE -
OPERATION..........................8Q-3
SENTRY KEY REMOTE ENTRY MODULE -
REMOVAL...........................8Q-3
SEPARATOR - INSTALLATION, OIL........9-50
SEPARATOR - REMOVAL, OIL............9-50
SERVO - DESCRIPTION.................8P-3
SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR A SHORT
TO GROUND ON FUSES POWERING . . . 8W-01-8
SHACKLE - INSTALLATION, SPRING.......2-15
SHACKLE - REMOVAL, SPRING..........2-15
SHAFT - DIAGNOSIS AND TESTING,
PROPELLER
...........................3-1
SHAFT - INSTALLATION, INTERMEDIATE
. . . 19-5
SHAFT - INSTALLATION, PROPELLER
.......3-6
SHAFT - REMOVAL, INTERMEDIATE
.......19-5
SHAFT - REMOVAL, PROPELLER
..........3-6SHAFT - SPECIAL TOOLS, PROPELLER.....3-5
SHAFT - SPECIFICATIONS, PROPELLER.....3-5
SHAFT - STANDARD PROCEDURE,
PROPELLER...........................3-3
SHAFT BEARING - INSTALLATION,
OUTPUT...........................21-122
SHAFT BEARING - REMOVAL, OUTPUT . . . 21-122
SHAFT SEAL - INSTALLATION, OUTPUT . . 21-125
SHAFT SEAL - REMOVAL, OUTPUT......21-125
SHAFTS - DUAL REAR WHEELS -
INSTALLATION, AXLE..................3-19
SHAFTS - DUAL REAR WHEELS -
REMOVAL, AXLE......................3-19
SHAFTS - INSTALLATION, AXLE..........3-15
SHAFTS - REMOVAL, AXLE..............3-15
SHIELD - INSTALLATION, REAR SEAT
BACK..............................23-79
SHIELD - REMOVAL, REAR SEAT BACK . . . 23-79
SHIFT MECHANISM - DESCRIPTION.....21-133
SHIFT MECHANISM - INSTALLATION....21-135
SHIFT MECHANISM - OPERATION......21-133
SHIFT MECHANISM - REMOVAL........21-134
SHOCK - DIAGNOSIS AND TESTING.......2-13
SHOCK - DIAGNOSIS AND TESTING,
SPRING.............................2-11
SHOCK - INSTALLATION................2-13
SHOCK - REMOVAL....................2-13
SHORT TO GROUND - STANDARD
PROCEDURE, TESTING FOR A..........8W-01-8
SHORT TO GROUND ON FUSES
POWERING SEVERAL LOADS -
STANDARD PROCEDURE, TESTING
FOR A ...........................8W-01-8
SHUTOFF SOL - DESCRIPTION, HI
PRESSURE FUEL.....................14-16
SHUTOFF SOL - OPERATION, HI
PRESSURE FUEL.....................14-16
SIDE MARKER LAMP BULB -
INSTALLATION, REAR.................8L-21
SIDE MARKER LAMP BULB - REMOVAL,
REAR..............................8L-21
SIDE VIEW MIRROR - GLASS -
INSTALLATION.......................23-49
SIDE VIEW MIRROR - GLASS -
REMOVAL..........................23-49
SIDE VIEW MIRROR - INSTALLATION.....23-48
SIDE VIEW MIRROR - REMOVAL........23-48
SIGNAL INDICATOR - DESCRIPTION,
TURN..............................8J-25
SIGNAL INDICATOR - OPERATION, TURN . . 8J-25
SIGNAL RELAY - INSTALLATION, TURN . . . 8L-24
SIGNAL RELAY - REMOVAL, TURN.......8L-24
SIREN - INSTALLATION................8Q-4
SIREN - REMOVAL....................8Q-4
SLIDE RAIL - INSTALLATION,
TENSIONING.........................9-66
SLIDE RAILS - REMOVAL, TENSIONING....9-61
SLIDING DOOR - ASSEMBLY...........23-43
SLIDING DOOR - DISASSEMBLY.........23-42
SLIDING DOOR - INSTALLATION.........23-44
SLIDING DOOR - REMOVAL............23-41
SOL - DESCRIPTION, HI PRESSURE
FUEL SHUTOFF......................14-16
SOL - OPERATION, HI PRESSURE FUEL
SHUTOFF...........................14-16
SOLENOID - DESCRIPTION............21-136
SOLENOID - DESCRIPTION, FUEL
PRESSURE.........................14-27
SOLENOID - INSTALLATION, FUEL
PRESSURE.........................14-28
SOLENOID - OPERATION..............21-138
SOLENOID - OPERATION, FUEL
PRESSURE.........................14-27
SOLENOID - REMOVAL, FUEL PRESSURE . 14-28
SOLENOID VALVE - DESCRIPTION.......24-27
SOLENOID VALVE - DIAGNOSIS AND
TESTING...........................24-27
SOLENOID VALVE - INSTALLATION.......24-28
SOLENOID VALVE - OPERATION.........24-27
SOLENOID VALVE - REMOVAL..........24-27
SPARE TIRE CARRIER - INSTALLATION . . . 22-10
SPARE TIRE CARRIER - REMOVAL.......22-10
SPEAKER - INSTALLATION
..............8A-2
SPEAKER - REMOVAL
..................8A-2
SPEED CONTROL - DESCRIPTION
........8P-1
SPEED CONTROL - OPERATION
..........8P-1
SPEED SENSOR - INSTALLATION, FRONT
WHEEL
.............................5-30
VAINDEX 15
Description Group-Page Description Group-Page Description Group-Page

SPEED SENSOR - INSTALLATION, REAR
WHEEL.............................5-31
SPEED SENSOR - REMOVAL, FRONT
WHEEL.............................5-30
SPEED SENSOR - REMOVAL, REAR
WHEEL.............................5-30
SPEED SENSORS - DESCRIPTION, INPUT . 21-119
SPEED SENSORS - OPERATION, INPUT . . 21-119
SPEEDOMETER - DESCRIPTION.........8J-23
SPEEDOMETER - OPERATION...........8J-23
SPEEDS - DESCRIPTION, TIRE
PRESSURE FOR HIGH..................22-6
SPLICE INFORMATION - DESCRIPTION,
CONNECTOR, GROUND..............8W-01-5
SPLICING - STANDARD PROCEDURE,
WIRE...........................8W-01-10
SPRING - DESCRIPTION................2-14
SPRING - INSTALLATION................2-8
SPRING - OPERATION..................2-14
SPRING - REMOVAL....................2-7
SPRING AND SHOCK - DIAGNOSIS AND
TESTING............................2-11
SPRING CLAMP PLATES - INSTALLATION . . . 2-8
SPRING CLAMP PLATES - REMOVAL.......2-8
SPRING SHACKLE - INSTALLATION.......2-15
SPRING SHACKLE - REMOVAL...........2-15
SPRING STOP PLATES - INSTALLATION.....2-9
SPRING STOP PLATES - REMOVAL........2-9
SPRINGS - INSTALLATION, VALVE..........9-32
SPRINGS - REMOVAL, VALVE............9-31
SQUEAK & RATTLE - STANDARD
PROCEDURE, BUZZ...................23-10
STABILIZER - INSTALLATION...........23-45
STABILIZER - REMOVAL...............23-45
STABILIZER BAR - DESCRIPTION..........2-9
STABILIZER BAR - INSTALLATION.....2-15,2-9
STABILIZER BAR - OPERATION............2-9
STABILIZER BAR - REMOVAL.........2-15,2-9
STABILIZER LINK - INSTALLATION.....2-16,2-9
STABILIZER LINK - REMOVAL........2-16,2-9
STARTER - DIESEL - TORQUE...........8F-29
STARTER MOTOR - DIAGNOSIS AND
TESTING...........................8F-29
STARTER MOTOR - DIESEL -
SPECIFICATIONS.....................8F-29
STARTER MOTOR - INSTALLATION.......8F-31
STARTER MOTOR - REMOVAL..........8F-30
STARTER MOTOR RELAY - DESCRIPTION . 8F-31
STARTER MOTOR RELAY -
INSTALLATION.......................8F-32
STARTER MOTOR RELAY - REMOVAL.....8F-31
STARTING - STANDARD PROCEDURE,
JUMP................................0-6
STARTING SYSTEM - DESCRIPTION......8F-24
STARTING SYSTEM - DIAGNOSIS AND
TESTING...........................8F-25
STARTING SYSTEM - OPERATION........8F-24
STEERING - DESCRIPTION..............19-1
STEERING - OPERATION................19-1
STEERING COLUMN OPENING COVER -
INSTALLATION.......................23-66
STEERING COLUMN OPENING COVER -
REMOVAL..........................23-66
STEERING FLUID - DESCRIPTION,
POWER..............................0-3
STEERING PUMP - INITIAL OPERATION -
STANDARD PROCEDURE, POWER.......19-12
STEERING PUMP FILL AND BLEED
PROCEDURE, STANDARD PROCEDURE
- POWER...........................19-14
STEERING SYSTEM - DIAGNOSIS AND
TESTING, POWER.....................19-2
STEERING SYSTEM - STANDARD
PROCEDURE, FLUSHING POWER........19-13
STEERING WHEEL - INSTALLATION.......19-7
STEERING WHEEL - REMOVAL...........19-7
STEP - INSTALLATION, REAR BUMPER....13-3
STEP - REMOVAL, REAR BUMPER........13-3
STEPS - INSTALLATION, FRONT BUMPER . . 13-2
STEPS - REMOVAL, FRONT BUMPER......13-2
STEPWELL SCUFF PADS - INSTALLATION
. 23-73
STEPWELL SCUFF PADS - REMOVAL
.....23-72
STOP LAMP BULB - INSTALLATION,
CENTER HIGH MOUNTED
...............8L-7
STOP LAMP BULB - REMOVAL, CENTER
HIGH MOUNTED
......................8L-7
STOP LAMP UN - INSTALLATION,
CENTER HIGH MOUNTED
...............8L-8STOP LAMP UN - REMOVAL, CENTER
HIGH MOUNTED......................8L-8
STOP PLATES - INSTALLATION, SPRING....2-9
STOP PLATES - REMOVAL, SPRING........2-9
STRIKER - INSTALLATION, LATCH.......23-18
STRIKER - INSTALLATION, REAR LATCH . . 23-41
STRIKER - REMOVAL, LATCH...........23-18
STRIKER - REMOVAL, REAR LATCH......23-41
STRUT - INSTALLATION................2-10
STRUT - REMOVAL....................2-10
SUCTION LINE - INSTALLATION.........24-66
SUCTION LINE - REMOVAL.............24-66
SUN VISOR - INSTALLATION...........23-73
SUN VISOR - REMOVAL...............23-73
SUPPLEMENTAL HEATER - DCHA -
DIAGNOSIS AND TESTING, DIESEL.......24-72
SUPPLEMENTAL RESTRAINT
DEPLOYMENT - STANDARD
PROCEDURE, SERVICE AFTER A.........8O-6
SUPPLEMENTAL RESTRAINT SYSTEM -
DIAGNOSIS AND TESTING..............8O-5
SUPPLEMENTAL RESTRAINTS -
STANDARD PROCEDURE, HANDLING
NON-DEPLOYED......................8O-6
SUPPLY RESTRICTIONS - DIAGNOSIS
AND TESTING, FUEL...................14-5
SUPPORT BRACKET - INSTALLATION,
REAR VIEW MIRROR.................23-72
SURFACE - STANDARD PROCEDURE,
MEASURE CYLINDER HEAD.............9-21
SUSPENSION, SPECIAL TOOLS - FRONT . . 19-11
SUSPENSION, SPECIAL TOOLS - FRONT....2-2
SWITCH - DESCRIPTION, BLOWER
MOTOR.......................24-17,24-22
SWITCH - DESCRIPTION, DRIVER
HEATED SEAT ........................8G-2
SWITCH - DESCRIPTION, MASTER LOCK . . . 8N-2
SWITCH - DESCRIPTION, PASSENGER
HEATED SEAT ........................8G-5
SWITCH - DESCRIPTION, SEAT BELT.....8O-31
SWITCH - DESCRIPTION, WASHER
FLUID LEVEL.........................8R-7
SWITCH - DIAGNOSIS AND TESTING,
BLOWER MOTOR...............24-17,24-23
SWITCH - DIAGNOSIS AND TESTING,
DRIVER HEATED SEAT.................8G-2
SWITCH - DIAGNOSIS AND TESTING,
MASTER LOCK.......................8N-2
SWITCH - DIAGNOSIS AND TESTING,
PASSENGER HEATED SEAT..............8G-5
SWITCH - DIAGNOSIS AND TESTING,
POWER MIRROR.....................8N-3
SWITCH - DIAGNOSIS AND TESTING,
POWER WINDOW.....................8N-5
SWITCH - INSTALLATION...............8P-3
SWITCH - INSTALLATION, BLOWER
MOTOR............................24-23
SWITCH - INSTALLATION, BRAKE LAMP . . . 8L-6
SWITCH - INSTALLATION, DOOR JAMB . . . 8L-31
SWITCH - INSTALLATION, DRIVER
HEATED SEAT ........................8G-3
SWITCH - INSTALLATION, FOG LAMP....8L-12
SWITCH - INSTALLATION, HEADLAMP
LEVELING..........................8L-17
SWITCH - INSTALLATION, HORN.........8H-1
SWITCH - INSTALLATION, MASTER LOCK . . 8N-2
SWITCH - INSTALLATION, MULTI-
FUNCTION..........................8L-20
SWITCH - INSTALLATION, PARK BRAKE . . . 8L-20
SWITCH - INSTALLATION, PASSENGER
HEATED SEAT ........................8G-5
SWITCH - INSTALLATION, POWER
MIRROR............................8N-4
SWITCH - INSTALLATION, POWER
WINDOW............................8N-6
SWITCH - OPERATION, BLOWER MOTOR . 24-17,
24-22
SWITCH - OPERATION, DRIVER HEATED
SEAT ...............................8G-2
SWITCH - OPERATION, PASSENGER
HEATED SEAT ........................8G-5
SWITCH - OPERATION, SEAT BELT
.......8O-31
SWITCH - OPERATION, WASHER FLUID
LEVEL
..............................8R-8
SWITCH - REMOVAL
...................8P-3
SWITCH - REMOVAL, BLOWER MOTOR
. . 24-17,
24-23
SWITCH - REMOVAL, BRAKE LAMP
.......8L-6SWITCH - REMOVAL, DOOR JAMB.......8L-31
SWITCH - REMOVAL, DRIVER HEATED
SEAT ...............................8G-3
SWITCH - REMOVAL, FOG LAMP........8L-11
SWITCH - REMOVAL, HEADLAMP
LEVELING..........................8L-16
SWITCH - REMOVAL, HORN.............8H-1
SWITCH - REMOVAL, MASTER LOCK......8N-2
SWITCH - REMOVAL, MULTI-FUNCTION . . . 8L-19
SWITCH - REMOVAL, PARK BRAKE......8L-20
SWITCH - REMOVAL, PASSENGER
HEATED SEAT ........................8G-5
SWITCH - REMOVAL, POWER MIRROR....8N-3
SWITCH - REMOVAL, POWER WINDOW . . . 8N-6
SWITCH BEZEL - INSTALLATION,
ACCESSORY........................23-54
SWITCH BEZEL - REMOVAL, ACCESSORY . 23-54
SYMBOLS - DESCRIPTION,
INTERNATIONAL....................Intro.-2
SYMBOLS - DESCRIPTION,
INTERNATIONAL.......................0-9
TACHOMETER - DESCRIPTION..........8J-23
TACHOMETER - OPERATION............8J-24
TAIL LAMP UNIT - INSTALLATION.......8L-23
TAIL LAMP UNIT - REMOVAL...........8L-23
TAILPIPE - INSTALLATION...............11-3
TAILPIPE - REMOVAL..................11-3
TANK - DESCRIPTION, FUEL............14-12
TANK - INSTALLATION, FUEL...........14-13
TANK - REMOVAL, FUEL...............14-12
TANK MODULE - DESCRIPTION, FUEL....14-13
TANK MODULE - INSTALLATION, FUEL....14-14
TANK MODULE - REMOVAL, FUEL.......14-13
TCM ADAPTATION - STANDARD
PROCEDURE.........................8E-8
TEMP SENSOR - DESCRIPTION, ENGINE
COOLANT............................7-14
TEMP SENSOR - INSTALLATION, ENGINE
COOLANT............................7-15
TEMP SENSOR - REMOVAL, ENGINE
COOLANT............................7-14
TEMPERATURE CONTROL -
DESCRIPTION.......................24-29
TEMPERATURE CONTROL - DIAGNOSIS
AND TESTING.......................24-29
TEMPERATURE CONTROL -
INSTALLATION.......................24-29
TEMPERATURE CONTROL - OPERATION . . 24-29
TEMPERATURE CONTROL - REMOVAL....24-29
TEMPERATURE GAUGE - DESCRIPTION,
ENGINE............................8J-15
TEMPERATURE GAUGE - OPERATION,
ENGINE............................8J-15
TEMPERATURE INDICATOR -
DESCRIPTION, AMBIENT...............8J-11
TEMPERATURE INDICATOR -
OPERATION, AMBIENT.................8J-11
TEMPERATURE SENSOR - DESCRIPTION . . 24-30
TEMPERATURE SENSOR - DESCRIPTION,
AIR OUTLET........................24-14
TEMPERATURE SENSOR - DESCRIPTION,
AMBIENT...........................24-15
TEMPERATURE SENSOR - DESCRIPTION,
EVAPORATOR
..................24-17,24-25
TEMPERATURE SENSOR - DESCRIPTION,
FUEL
..............................14-29
TEMPERATURE SENSOR - DESCRIPTION,
IN-CAR
............................24-19
TEMPERATURE SENSOR - DESCRIPTION,
INLET AIR
..........................14-29
TEMPERATURE SENSOR - DESCRIPTION,
OIL
................................9-56
TEMPERATURE SENSOR - DESCRIPTION,
TRANSMISSION
.....................21-140
TEMPERATURE SENSOR - DIAGNOSIS
AND TESTING
.......................24-30
TEMPERATURE SENSOR - DIAGNOSIS
AND TESTING, EVAPORATOR
...........24-26
TEMPERATURE SENSOR - DIAGNOSIS
AND TESTING, IN-CAR
................24-19
TEMPERATURE SENSOR - INSTALLATION
. 24-30
TEMPERATURE SENSOR -
INSTALLATION, AIR OUTLET
............24-15
TEMPERATURE SENSOR -
INSTALLATION, AMBIENT
..............24-16
TEMPERATURE SENSOR -
INSTALLATION, EVAPORATOR
......24-18,24-26
16 INDEXVA
Description Group-Page Description Group-Page Description Group-Page

TEMPERATURE SENSOR -
INSTALLATION, FUEL.................14-29
TEMPERATURE SENSOR -
INSTALLATION, INLET AIR.............14-30
TEMPERATURE SENSOR -
INSTALLATION, OIL....................9-57
TEMPERATURE SENSOR - OPERATION....24-30
TEMPERATURE SENSOR - OPERATION,
AIR OUTLET........................24-15
TEMPERATURE SENSOR - OPERATION,
AMBIENT...........................24-15
TEMPERATURE SENSOR - OPERATION,
EVAPORATOR..................24-18,24-26
TEMPERATURE SENSOR - OPERATION,
FUEL..............................14-29
TEMPERATURE SENSOR - OPERATION,
IN-CAR............................24-19
TEMPERATURE SENSOR - OPERATION,
INLET AIR..........................14-29
TEMPERATURE SENSOR - OPERATION,
OIL ................................9-56
TEMPERATURE SENSOR - OPERATION,
TRANSMISSION.....................21-141
TEMPERATURE SENSOR - REMOVAL.....24-30
TEMPERATURE SENSOR - REMOVAL,
AIR OUTLET........................24-15
TEMPERATURE SENSOR - REMOVAL,
AMBIENT...........................24-15
TEMPERATURE SENSOR - REMOVAL,
EVAPORATOR..................24-18,24-26
TEMPERATURE SENSOR - REMOVAL,
FUEL..............................14-29
TEMPERATURE SENSOR - REMOVAL,
IN-CAR............................24-19
TEMPERATURE SENSOR - REMOVAL,
INLET AIR..........................14-30
TEMPERATURE SENSOR - REMOVAL,
OIL ................................9-57
TENSIONER - DESCRIPTION, SEAT BELT . . 8O-31
TENSIONER - INSTALLATION, CABLE......5-23
TENSIONER - INSTALLATION, TIMING
CHAIN..............................9-71
TENSIONER - OPERATION, SEAT BELT....8O-32
TENSIONER - REMOVAL, CABLE..........5-23
TENSIONER - REMOVAL, TIMING CHAIN . . . 9-70
TENSIONERS - DESCRIPTION, BELT........7-5
TENSIONERS - OPERATION, BELT..........7-5
TENSIONING AND SLIDE RAIL -
INSTALLATION........................9-66
TENSIONING AND SLIDE RAILS -
REMOVAL...........................9-61
TENSIONING RAIL - INSTALLATION,
TIMING CHAIN.......................9-66
TENSIONING RAIL - REMOVAL, TIMING
CHAIN..............................9-63
TERMINAL - INSTALLATION.........8W-01-10
TERMINAL - REMOVAL..............8W-01-9
TEST - DIAGNOSIS AND TESTING, A/C
PERFORMANCE.......................24-3
TEST - DIAGNOSIS AND TESTING,
FUNCTION...........................24-3
TEST - STANDARD PROCEDURE,
CYLINDER LEAK DOWN.................9-3
TEST - STANDARD PROCEDURE,
IGNITION-OFF DRAW..................8F-10
TEST - STANDARD PROCEDURE, LOW
PRESSURE FUEL PUMP................14-3
TEST - STANDARD PROCEDURE,
OPEN-CIRCUIT VOLTAGE...............8F-10
TEST - STANDARD PROCEDURE,
VERIFICATION........................8O-7
TESTER - STANDARD PROCEDURE,
USING MICRO 420 BATTERY............8F-11
THEFT SECURITY - DESCRIPTION,
VEHICLE............................8Q-1
THEFT SECURITY - DIAGNOSIS AND
TESTING, VEHICLE....................8Q-1
THEFT SECURITY - OPERATION, VEHICLE . . 8Q-1
THERMOSTAT - INSTALLATION, ENGINE
COOLANT
............................7-16
THERMOSTAT - REMOVAL, ENGINE
COOLANT
............................7-15
THREAD REPAIR - STANDARD
PROCEDURE, ALUMINUM
..............21-27
THREADED HOLE REPAIR -
DESCRIPTION
......................Intro.-5
TIE ROD END - DIAGNOSIS AND
TESTING, OUTER
.....................19-10TIE ROD END - INSTALLATION..........19-11
TIE ROD END - REMOVAL..............19-11
TIME DELAY RELAY - INSTALLATION.....8L-33
TIME DELAY RELAY - REMOVAL.........8L-32
TIMER MODULE - DESCRIPTION,
CENTRAL............................8E-1
TIMER MODULE - DIAGNOSIS AND
TESTING, CENTRAL....................8E-2
TIMER MODULE - INSTALLATION,
CENTRAL............................8E-2
TIMER MODULE - OPERATION, CENTRAL . . 8E-2
TIMER MODULE - REMOVAL, CENTRAL....8E-2
TIMING CHAIN - INSTALLATION..........9-67
TIMING CHAIN - REMOVAL..............9-63
TIMING CHAIN COVER - INSTALLATION....9-60
TIMING CHAIN COVER - REMOVAL.......9-59
TIMING CHAIN TENSIONER -
INSTALLATION........................9-71
TIMING CHAIN TENSIONER - REMOVAL....9-70
TIMING CHAIN TENSIONING RAIL -
INSTALLATION........................9-66
TIMING CHAIN TENSIONING RAIL -
REMOVAL...........................9-63
TIRE AND WHEEL BALANCE -
STANDARD PROCEDURE................22-3
TIRE AND WHEEL RUNOUT - DIAGNOSIS
AND TESTING........................22-1
TIRE CARRIER - INSTALLATION, SPARE . . . 22-10
TIRE CARRIER - REMOVAL, SPARE......22-10
TIRE INFLATION PRESSURES -
DESCRIPTION........................22-7
TIRE NOISE OR VIBRATION - DIAGNOSIS
AND TESTING........................22-8
TIRE PRESSURE FOR HIGH SPEEDS -
DESCRIPTION........................22-6
TIRE ROTATION - STANDARD
PROCEDURE.........................22-5
TIRE WEAR PATTERNS - DIAGNOSIS
AND TESTING........................22-8
TIRES - DESCRIPTION.................22-6
TIRES - DESCRIPTION, RADIAL - PLY.....22-6
TIRES - DESCRIPTION, REPLACEMENT....22-7
TIRES, SPECIFICATIONS...............22-10
TIRE/VEHICLE LEAD - DIAGNOSIS AND
TESTING............................22-8
TO COOLER TUBE - INSTALLATION,
RETURN HOSE FROM GEAR............19-15
TO COOLER TUBE - INSTALLATION,
RETURN LINE FROM PUMP............19-15
TO COOLER TUBE - REMOVAL, RETURN
HOSE FROM GEAR...................19-15
TO COOLER TUBE - REMOVAL, RETURN
LINE FROM PUMP....................19-15
TO GROUND - STANDARD PROCEDURE,
TESTING FOR A SHORT.............8W-01-8
TO GROUND ON FUSES POWERING
SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR A SHORT . . 8W-01-8
TO USE WIRING DIAGRAMS -
DESCRIPTION, HOW................8W-01-1
TOE ADJUSTMENT - STANDARD
PROCEDURE.........................2-19
TONE WHEEL - INSTALLATION...........5-31
TONE WHEEL - REMOVAL...............5-31
TOOLS - AUDIO, SPECIAL...............8A-1
TOOLS - BATTERY SYSTEM SPECIAL
TOOLS, SPECIAL......................8F-6
TOOLS - BRAKES, SPECIAL..............5-7
TOOLS - FRONT SUSPENSION, SPECIAL . . 19-11
TOOLS - FRONT SUSPENSION, SPECIAL....2-2
TOOLS - FUEL SYSTEM, SPECIAL........14-5
TOOLS - PARK BRAKE, SPECIAL.........5-23
TOOLS, IGNITION CONTROL - SPECIAL....8I-1
TOOLS, INSTALLATION - SPECIAL........9-14
TOOLS, NAG1 AUTOMATIC
TRANSMISSION - SPECIAL.............21-69
TOOLS, PROPELLER SHAFT - SPECIAL.....3-5
TOOLS, REAR AXLE - SPECIAL...........3-14
TOOLS, SPECIAL TOOLS - BATTERY
SYSTEM SPECIAL.....................8F-6
TOOLS, SPECIFICATIONS - SPECIAL......8F-17
TOP COVER - CLUSTER - INSTALLATION . . 23-62
TOP COVER - CLUSTER - REMOVAL.....23-62
TOP COVER - INSTALLATION
...........23-65
TOP COVER - REMOVAL
...............23-64
TOP COVER - TRAY - INSTALLATION
.....23-64
TOP COVER - TRAY - REMOVAL
.........23-63
TOUCH-UP - DESCRIPTION, PAINT
.......23-74TOUCH-UP - STANDARD PROCEDURE,
PAINT.............................23-75
TOWING - STANDARD PROCEDURE........0-6
TRACK - INSTALLATION, CENTER........23-39
TRACK - REMOVAL, CENTER...........23-38
TRACTION CONTROL INDICATOR -
DESCRIPTION.......................8J-24
TRACTION CONTROL INDICATOR -
OPERATION.........................8J-24
TRACTION CONTROL MALFUNCTION
INDICATOR - DESCRIPTION............8J-25
TRACTION CONTROL MALFUNCTION
INDICATOR - OPERATION..............8J-25
TRAILER HITCH - INSTALLATION........13-10
TRAILER HITCH - REMOVAL.............13-9
TRANSDUCER - DESCRIPTION, A/C
PRESSURE.........................24-13
TRANSDUCER - DIAGNOSIS AND
TESTING, A/C PRESSURE..............24-13
TRANSDUCER - INSTALLATION, A/C
PRESSURE.........................24-14
TRANSDUCER - INSTALLATION, VACUUM . . 11-8
TRANSDUCER - OPERATION, A/C
PRESSURE.........................24-13
TRANSDUCER - REMOVAL, A/C
PRESSURE.........................24-14
TRANSDUCER - REMOVAL, VACUUM......11-7
TRANSMISSION - DIAGNOSIS AND
TESTING, AUTOMATIC............21-23,21-24
TRANSMISSION - INSTALLATION, REAR
CROSSMEMBER......................13-9
TRANSMISSION - NAG1 - DESCRIPTION,
AUTOMATIC..........................21-2
TRANSMISSION - NAG1 - OPERATION,
AUTOMATIC..........................21-4
TRANSMISSION - REMOVAL, REAR
CROSSMEMBER......................13-9
TRANSMISSION - SPECIAL TOOLS,
NAG1 AUTOMATIC....................21-69
TRANSMISSION - SPECIFICATIONS,
NAG1 AUTOMATIC....................21-68
TRANSMISSION CONTROL MODULE -
DESCRIPTION........................8E-5
TRANSMISSION CONTROL MODULE -
OPERATION..........................8E-5
TRANSMISSION FILL - STANDARD
PROCEDURE.......................21-103
TRANSMISSION FLUID - NAG1 -
DESCRIPTION, AUTOMATIC..............0-4
TRANSMISSION FLUID - OPERATION,
AUTOMATIC...........................0-4
TRANSMISSION TEMPERATURE SENSOR
- DESCRIPTION.....................21-140
TRANSMISSION TEMPERATURE SENSOR
- OPERATION.......................21-141
TRANSMITTER - DESCRIPTION, REMOTE
KEYLESS ENTRY......................8N-2
TRANSPONDER KEY - DESCRIPTION......8Q-5
TRANSPONDER KEY - OPERATION........8Q-5
TRAY - DESCRIPTION, BATTERY.........8F-16
TRAY - INSTALLATION, BATTERY........8F-16
TRAY - INSTALLATION, TOP COVER......23-64
TRAY - OPERATION, BATTERY..........8F-16
TRAY - REMOVAL, BATTERY............8F-16
TRAY - REMOVAL, TOP COVER..........23-63
TREAD WEAR INDICATORS - DIAGNOSIS
AND TESTING........................22-8
TRIM - INSTALLATION, A-PILLAR........23-68
TRIM - INSTALLATION, B-PILLAR........23-69
TRIM - INSTALLATION, COWL..........23-70
TRIM - INSTALLATION, D-PILLAR........23-70
TRIM - REMOVAL, A-PILLAR...........23-67
TRIM - REMOVAL, B-PILLAR...........23-68
TRIM - REMOVAL, COWL..............23-70
TRIM - REMOVAL, D-PILLAR...........23-70
TRIM PANEL - INSTALLATION.....23-20,23-35,
23-46
TRIM PANEL - INSTALLATION, BACKLITE
- BULKHEAD........................23-81
TRIM PANEL - INSTALLATION,
BULKHEAD.........................23-69
TRIM PANEL - INSTALLATION, QUARTER . . 23-72
TRIM PANEL - REMOVAL
....23-19,23-35,23-46
TRIM PANEL - REMOVAL, BACKLITE -
BULKHEAD
.........................23-81
TRIM PANEL - REMOVAL, BULKHEAD
....23-69
TRIM PANEL - REMOVAL, QUARTER
.....23-71
TUBE - INSTALLATION, EXHAUST
........24-73
VAINDEX 17
Description Group-Page Description Group-Page Description Group-Page

TUBE - INSTALLATION, FLUID COOLER . . . 19-14
TUBE - INSTALLATION, RETURN HOSE
FROM GEAR TO COOLER..............19-15
TUBE - INSTALLATION, RETURN LINE
FROM PUMP TO COOLER..............19-15
TUBE - REMOVAL, EXHAUST...........24-73
TUBE - REMOVAL, FLUID COOLER.......19-14
TUBE - REMOVAL, RETURN HOSE FROM
GEAR TO COOLER....................19-15
TUBE - REMOVAL, RETURN LINE FROM
PUMP TO COOLER...................19-15
TURBOCHARGER - DESCRIPTION.........11-6
TURBOCHARGER - OPERATION..........11-6
TURBOCHARGER SYSTEM -
DESCRIPTION........................11-3
TURBOCHARGER SYSTEM - OPERATION . . . 11-4
TURN LAMP BULB - INSTALLATION,
REAR..............................8L-22
TURN LAMP BULB - REMOVAL, REAR....8L-21
TURN SIGNAL INDICATOR -
DESCRIPTION.......................8J-25
TURN SIGNAL INDICATOR - OPERATION . . 8J-25
TURN SIGNAL RELAY - INSTALLATION....8L-24
TURN SIGNAL RELAY - REMOVAL.......8L-24
TURNING LOOP ADJUSTER -
INSTALLATION, SEAT BELT.............8O-34
TURNING LOOP ADJUSTER - REMOVAL,
SEAT BELT .........................8O-33
TURN/PARK/SIDE MARKER LAMP BULB
- INSTALLATION, FRONT...............8L-15
TURN/PARK/SIDE MARKER LAMP BULB
- REMOVAL, FRONT..................8L-14
UN - INSTALLATION, CENTER HIGH
MOUNTED STOP LAMP.................8L-8
UN - REMOVAL, CENTER HIGH
MOUNTED STOP LAMP.................8L-8
UNDER HOOD BATTERY INSTALLATION,
INSTALLATION.......................8F-13
UNDER HOOD BATTERY REMOVAL,
REMOVAL..........................8F-12
UNDERBODY LINES - INSTALLATION.....24-69
UNDERBODY LINES - REMOVAL.........24-68
UNIT - ADJUSTMENT, FRONT LAMP......8L-12
UNIT - ASSEMBLY, ELECTROHYDRAULIC . . 21-95
UNIT - DESCRIPTION,
ELECTROHYDRAULIC.................21-82
UNIT - DISASSEMBLY,
ELECTROHYDRAULIC.................21-92
UNIT - INSTALLATION, ASH RECEIVER/
CIGAR LIGHTER LAMP................8L-27
UNIT - INSTALLATION, CARGO/DOME
LAMP..............................8L-28
UNIT - INSTALLATION, CLEARANCE
LAMP...............................8L-9
UNIT - INSTALLATION, DOME/READING
LAMP..............................8L-30
UNIT - INSTALLATION,
ELECTROHYDRAULIC................21-100
UNIT - INSTALLATION, ENTRY/EXIT
LAMP..............................8L-32
UNIT - INSTALLATION, FRONT LAMP.....8L-12
UNIT - INSTALLATION, LICENSE PLATE
LAMP..............................8L-18
UNIT - INSTALLATION, REPEATER LAMP . . 8L-23
UNIT - INSTALLATION, TAIL LAMP.......8L-23
UNIT - OPERATION,
ELECTROHYDRAULIC.................21-87
UNIT - REMOVAL, ASH RECEIVER/CIGAR
LIGHTER LAMP......................8L-27
UNIT - REMOVAL, CARGO/DOME LAMP . . . 8L-28
UNIT - REMOVAL, CLEARANCE LAMP.....8L-8
UNIT - REMOVAL, DOME/READING
LAMP..............................8L-30
UNIT - REMOVAL, ELECTROHYDRAULIC . . 21-92
UNIT - REMOVAL, ENTRY/EXIT LAMP....8L-32
UNIT - REMOVAL, FRONT LAMP.........8L-12
UNIT - REMOVAL, LICENSE PLATE LAMP . . 8L-18
UNIT - REMOVAL, REPEATER LAMP......8L-22
UNIT - REMOVAL, TAIL LAMP...........8L-23
UNIT / SENSOR - DESCRIPTION, FUEL
LEVEL SENDING.....................14-15
UNIT / SENSOR - INSTALLATION, FUEL
LEVEL SENDING
.....................14-15
UNIT / SENSOR - REMOVAL, FUEL
LEVEL SENDING
.....................14-15
UPPER ROLLER ARM - INSTALLATION
....23-37
UPPER ROLLER ARM - REMOVAL
.......23-37
USAGE - DESCRIPTION, FASTENER
.....Intro.-5USE WIRING DIAGRAMS -
DESCRIPTION, HOW TO.............8W-01-1
USING MICRO 420 BATTERY TESTER -
STANDARD PROCEDURE...............8F-11
VACUUM PUMP - DESCRIPTION..........9-48
VACUUM PUMP - INSTALLATION.........9-49
VACUUM PUMP - OPERATION...........9-48
VACUUM PUMP - REMOVAL.............9-48
VACUUM TRANSDUCER - INSTALLATION . . . 11-8
VACUUM TRANSDUCER - REMOVAL......11-7
VALVE - DESCRIPTION.................25-1
VALVE - DESCRIPTION, A/C EXPANSION . . 24-55
VALVE - DESCRIPTION, CHECK..........8R-7
VALVE - DESCRIPTION, SOLENOID.......24-27
VALVE - DIAGNOSIS AND TESTING, A/C
EXPANSION.........................24-56
VALVE - DIAGNOSIS AND TESTING,
SOLENOID..........................24-27
VALVE - INSTALLATION.................25-2
VALVE - INSTALLATION, A/C EXPANSION . . 24-56
VALVE - INSTALLATION, CHECK..........8R-7
VALVE - INSTALLATION, REAR
EXPANSION.........................24-63
VALVE - INSTALLATION, SOLENOID......24-28
VALVE - INSTALLATION, WATER.........24-67
VALVE - OPERATION...................25-1
VALVE - OPERATION, A/C EXPANSION....24-55
VALVE - OPERATION, CHECK..............8R-7
VALVE - OPERATION, SOLENOID........24-27
VALVE - REMOVAL....................25-2
VALVE - REMOVAL, A/C EXPANSION.....24-56
VALVE - REMOVAL, CHECK..............8R-7
VALVE - REMOVAL, REAR EXPANSION....24-62
VALVE - REMOVAL, SOLENOID..........24-27
VALVE - REMOVAL, WATER.............24-67
VALVE SPRINGS - INSTALLATION.........9-32
VALVE SPRINGS - REMOVAL............9-31
VALVES - INSTALLATION................9-33
VALVES - REMOVAL...................9-31
VEHICLE IDENTIFICATION NUMBER -
DESCRIPTION......................Intro.-1
VEHICLE THEFT SECURITY -
DESCRIPTION........................8Q-1
VEHICLE THEFT SECURITY - DIAGNOSIS
AND TESTING........................8Q-1
VEHICLE THEFT SECURITY - OPERATION . . 8Q-1
VERIFICATION TEST - STANDARD
PROCEDURE.........................8O-7
VIBRATION - DIAGNOSIS AND TESTING,
TIRE NOISE OR.......................22-8
VIBRATION DAMPER - INSTALLATION.....9-48
VIBRATION DAMPER - REMOVAL.........9-47
VIEW MIRROR - GLASS -
INSTALLATION, SIDE..................23-49
VIEW MIRROR - GLASS - REMOVAL,
SIDE..............................23-49
VIEW MIRROR - INSTALLATION, SIDE....23-48
VIEW MIRROR - REMOVAL, REAR.......23-72
VIEW MIRROR - REMOVAL, SIDE........23-48
VIEW MIRROR SUPPORT BRACKET -
INSTALLATION, REAR.................23-72
VISCOUS CLUTCH - INSTALLATION, FAN
DRIVE..............................7-16
VISCOUS CLUTCH - REMOVAL, FAN
DRIVE..............................7-16
VISOR - INSTALLATION, SUN...........23-73
VISOR - REMOVAL, SUN...............23-73
VOLTAGE DROP - STANDARD
PROCEDURE, TESTING FOR A........8W-01-8
VOLTAGE POTENTIAL - STANDARD
PROCEDURE, TESTING OF...........8W-01-7
VOLTAGE REGULATOR - DESCRIPTION....8F-23
VOLTAGE TEST - STANDARD
PROCEDURE, OPEN-CIRCUIT...........8F-10
WAIT-TO-START INDICATOR -
DESCRIPTION.......................8J-26
WAIT-TO-START INDICATOR -
OPERATION.........................8J-26
WARNING - INSTALLATION.............23-83
WARNING - REMOVAL................23-82
WARNING - SAFETY PRECAUTIONS AND
WARNINGS
..........................23-1
WARNING - WARNING
.................14-1
WARNING - WINDSHIELD SAFETY
PRECAUTIONS
.......................23-82
WARNING, HIGH FUEL SYSTEM
PRESSURE
..........................14-1
WARNING, PLUMBING
................24-44WARNING SYSTEM - DIAGNOSIS AND
TESTING, CHIME......................8B-2
WARNING, WARNING..................14-1
WARNINGS, GENERAL..............8W-01-6
WARNINGS, RESTRAINT SYSTEM........8O-5
WARNINGS, WARNING - SAFETY
PRECAUTIONS........................23-1
WASHER FLUID INDICATOR -
DESCRIPTION.......................8J-27
WASHER FLUID INDICATOR -
OPERATION.........................8J-27
WASHER FLUID LEVEL SWITCH -
DESCRIPTION........................8R-7
WASHER FLUID LEVEL SWITCH -
OPERATION..........................8R-8
WASHER HOSES/TUBES - DESCRIPTION . . . 8R-8
WASHER HOSES/TUBES - OPERATION.....8R-9
WASHER NOZZLE - DESCRIPTION........8R-9
WASHER NOZZLE - INSTALLATION.......8R-9
WASHER NOZZLE - OPERATION..........8R-9
WASHER NOZZLE - REMOVAL...........8R-9
WASHER PUMP/MOTOR - DESCRIPTION . . . 8R-9
WASHER PUMP/MOTOR - INSTALLATION . 8R-10
WASHER PUMP/MOTOR - OPERATION . . . 8R-10
WASHER PUMP/MOTOR - REMOVAL.....8R-10
WASHER RESERVOIR - DESCRIPTION....8R-11
WASHER RESERVOIR - INSTALLATION . . . 8R-12
WASHER RESERVOIR - OPERATION......8R-11
WASHER RESERVOIR - REMOVAL.......8R-11
WASHER SYSTEM - CLEANING, WIPER....8R-5
WASHER SYSTEM - DIAGNOSIS AND
TESTING, WIPER.....................8R-5
WASHER SYSTEM - INSPECTION, WIPER . . 8R-6
WATER FROM FUEL FILTER - STANDARD
PROCEDURES, DRAINING...............14-2
WATER IN FUEL SENSOR -
DESCRIPTION.......................14-16
WATER IN FUEL SENSOR - OPERATION . . . 14-16
WATER LEAKS - DIAGNOSIS AND
TESTING............................23-1
WATER PUMP - INSTALLATION..........7-20
WATER PUMP - REMOVAL..............7-19
WATER VALVE - INSTALLATION.........24-67
WATER VALVE - REMOVAL.............24-67
WATER-IN-FUEL INDICATOR -
DESCRIPTION.......................8J-27
WATER-IN-FUEL INDICATOR -
OPERATION.........................8J-28
WEAR INDICATOR - DESCRIPTION,
BRAKE.............................8J-12
WEAR INDICATOR - OPERATION, BRAKE . . 8J-12
WEAR INDICATORS - DIAGNOSIS AND
TESTING, TREAD......................22-8
WEAR PATTERNS - DIAGNOSIS AND
TESTING, TIRE.......................22-8
WEATHERSTRIP - INSTALLATION, FRONT
DOOR INNER BELT...................23-87
WEATHERSTRIP - INSTALLATION, FRONT
DOOR OUTER BELT...................23-87
WEATHERSTRIP - REMOVAL, FRONT
DOOR INNER BELT...................23-87
WEATHERSTRIP - REMOVAL, FRONT
DOOR OUTER BELT...................23-87
WHEEL - INSTALLATION, STEERING.......19-7
WHEEL - INSTALLATION, TONE..........5-31
WHEEL - REMOVAL, STEERING..........19-7
WHEEL - REMOVAL, TONE..............5-31
WHEEL ALIGNMENT - DESCRIPTION......2-17
WHEEL ALIGNMENT - SPECIFICATIONS....2-19
WHEEL BALANCE - STANDARD
PROCEDURE, TIRE....................22-3
WHEEL INSPECTION, DIAGNOSIS AND
TESTING...........................22-11
WHEEL INSTALLATION - STANDARD
PROCEDURE, DUAL REAR.............22-12
WHEEL REPLACEMENT - STANDARD
PROCEDURE........................22-11
WHEEL RUNOUT - DIAGNOSIS AND
TESTING, TIRE.......................22-1
WHEEL SPEED SENSOR -
INSTALLATION, FRONT
.................5-30
WHEEL SPEED SENSOR -
INSTALLATION, REAR
..................5-31
WHEEL SPEED SENSOR - REMOVAL,
FRONT
..............................5-30
WHEEL SPEED SENSOR - REMOVAL,
REAR
...............................5-30
WHEELS - DESCRIPTION
..............22-11
18 INDEXVA
Description Group-Page Description Group-Page Description Group-Page

WHEELS - INSTALLATION, AXLE SHAFTS
- DUAL REAR........................3-19
WHEELS - OPERATION................22-11
WHEELS - REMOVAL, AXLE SHAFTS -
DUAL REAR..........................3-19
WIND NOISE - DIAGNOSIS AND TESTING . . 23-2
WINDOW - INSTALLATION, QUARTER....23-81
WINDOW - REMOVAL, QUARTER........23-81
WINDOW MOTOR - REMOVAL...........8N-5
WINDOW REGULATOR - MANUAL -
INSTALLATION.......................23-23
WINDOW REGULATOR - MANUAL -
REMOVAL..........................23-22
WINDOW REGULATOR - POWER -
INSTALLATION.......................23-21
WINDOW REGULATOR - POWER -
REMOVAL..........................23-20
WINDOW SWITCH - DIAGNOSIS AND
TESTING, POWER.....................8N-5
WINDOW SWITCH - INSTALLATION,
POWER.............................8N-6WINDOW SWITCH - REMOVAL, POWER . . . 8N-6
WINDOWS - DESCRIPTION, POWER......8N-5
WINDOWS - OPERATION, POWER........8N-5
WINDSHIELD SAFETY PRECAUTIONS,
WARNING..........................23-82
WIPER & WASHER SYSTEM - CLEANING . . 8R-5
WIPER & WASHER SYSTEM -
DIAGNOSIS AND TESTING..............8R-5
WIPER & WASHER SYSTEM -
INSPECTION.........................8R-6
WIPER ARM - DESCRIPTION...........8R-13
WIPER ARM - INSTALLATION...........8R-14
WIPER ARM - OPERATION.............8R-14
WIPER ARM - REMOVAL..............8R-14
WIPER BLADE - DESCRIPTION..........8R-15
WIPER BLADE - INSTALLATION.........8R-16
WIPER BLADE - OPERATION...........8R-15
WIPER BLADE - REMOVAL.............8R-16
WIPER LINKAGE - DESCRIPTION........8R-17
WIPER LINKAGE - INSTALLATION.......8R-18
WIPER LINKAGE - OPERATION..........8R-17WIPER LINKAGE - REMOVAL
...........8R-17
WIPER MOTOR - DESCRIPTION
.........8R-19
WIPER MOTOR - INSTALLATION
........8R-19
WIPER MOTOR - OPERATION
...........8R-19
WIPER MOTOR - REMOVAL
............8R-19
WIPER RELAY - DESCRIPTION
..........8R-20
WIPER RELAY - INSTALLATION
.........8R-22
WIPER RELAY - OPERATION
...........8R-21
WIPER RELAY - REMOVAL
.............8R-22
WIPERS/WASHERS - DESCRIPTION
.......8R-1
WIPERS/WASHERS - OPERATION
........8R-3
WIRE SPLICING - STANDARD
PROCEDURE
.....................8W-01-10
WIRING DIAGRAMS - DESCRIPTION,
HOW TO USE
.....................8W-01-1
WIRING HARNESS - DIAGNOSIS AND
TESTING
.........................8W-01-6
VAINDEX 19
Description Group-Page Description Group-Page Description Group-Page

SERVICE MANUAL COMMENTS
What errors(s) have you found?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
In order for us to assist you, please include as much details as possible when reporting an error
Comments / Suggestions
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
hDealership Technician
Dealer Code:Retail Customerh
Manual Title, Year, Number and Page:_________________________________________________
______________________________________________________________________________________
Your Name:________________________________________________________________________
Address:________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
All comments become property of DaimlerChrysler and may be used without compensation.

Dealer Technical Operations
800 Chrysler Drive
CIMS 486-02-76
Auburn Hills, MI 48326-2757