2003 DAEWOO MATIZ Service Repair Manual

9B–10 LIGHTING SYSTEMS
DAEWOO M-150 BL2
D209B100
5. Remove the front fog lamp.

Remove the screws (1).

Disconnect the electrical connector (2).

Remove the front fog lamp (3).
D209B101
Installation Procedure
1. Install the front fog lamp with the screws.
2. Connect the front fog lamp connector.
3. Install the front wheelhouse splash shields with the
clips and the bolts.
4. Install the front wheels.
5. Lower the vehicle.
6. Connect the negative battery cable.
D19D508C
REAR FOG/BACKUP LAMP(S)
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the taillamp assembly. Refer to “Taillamps
Assembly” in this section.
3. Remove the bulb(s).
D19D509A
Installation Procedure
1. Install the bulb(s).
2. Install the taillamp assembly. Refer to “Taillamps As-
sembly” in this section.
3. Connect the negative battery cable.

LIGHTING SYSTEMS 9B–11
DAEWOO M-150 BL2
D29B003B
CENTER HIGH-MOUNTED
STOPLAMP (CHMSL)
Removal Procedure
1. Disconnect the negative battery cable.
2. Open the tailgate.
3. Pry off the tailgate trim panel. Refer to Section 9G In-
terior Trim.
4. Remove the CHMSL cover.

Remove the screws (1).

Remove the CHMSL cover (2).
D29B004A
5. Remove the CHMSL and bulb.

Remove the screws (1).
D29B005B

Remove the screw from bulb socket (2).

Remove the CHMSL (3).

Remove the bulb (4).
D19E554A
Installation Procedure
1. Install the CHMSL bulb.
2. Install the CHMSL with the screws.
3. Install the CHMSL cover with the screws.
4. Install the tailgate trim panel. Refer to Section 9G, In-
terior Trim.
5. Connect the negative battery cable.

9B–12 LIGHTING SYSTEMS
DAEWOO M-150 BL2
D209B102
CHMSL MOUNTING BRACKET
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the center high–mounted stoplamp
(CHMSL). Refer to “Center High–Mounted Stoplamp”
in this section.
3. Remove the rear window wiper motor assembly. Re-
fer to Section 9D, Wipers/Washer Systems.
4. Remove the CHMSL mounting bracket.

Remove the bolts (1).

Remove the CHMSL mounting bracket (2).
D209B103
Installation Procedure
1. Install the CHMSL mounting bracket with the bolts.
2. Install the rear window wiper motor assembly. Refer
to Section 9D, Wipers/Washer Systems.
3 .Install the CHMSL. Refer to “Center High–Mounted
Stoplamp” in this section.
4. Connect the negative battery cable.
D19D510A
LICENSE PLATE LAMPS
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the license plate lamp from the tailgate han-
dle.

Remove the screws (1).

Draw out the license plate lamp (2).

Remove the license plate lamp bulb (3).
D19D511A
3. Remove the rear window wiper motor assembly. Re-
fer to Section 9D, Wipers/Washer Systems.
4. Disconnect the electrical connector in the tailgate.
5. Remove the tailgate handle. Refer to Section 9M, Ex-
terior Trim.
6. Remove the license plate lamp socket.

Remove the socket (1).

LIGHTING SYSTEMS 9B–13
DAEWOO M-150 BL2
D19D512A
Installation Procedure
1. Install the license plate lamp socket.
2. Install the tailgate handle. Refer to Section 9M, Exte-
rior Trim.
3. Connect the electrical connector.
4. Remove the rear window wiper motor assembly. Re-
fer to Section 9D, Wipers/Washer Systems.
5. Install the license plate lamp bulb.
6. Install the license plate lamp with the screws.
7. Connect the negative battery cable.
D109D513
DOOR JAMB SWITCH
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the door jamb switch.

Remove the screw (1).

Disconnect the electrical connector (2).

Remove the door jamb switch (3).
D109D514
Installation Procedure
1. Install the door jamb switch with the screw.
2. Connect the electrical connector.
3. Connect the negative battery cable.
D19D515A
INTERIOR COURTESY LAMP
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the interior courtesy lamp.

Pry off the interior courtesy lamp lens (1).

Remove the screws (2).

Disconnect the electrical connector (3).

Remove the interior courtesy lamp (4).

9B–14 LIGHTING SYSTEMS
DAEWOO M-150 BL2
D109D516
Installation Procedure
1. Connect the electrical connector.
2. Install the interior courtesy lamp with the screws.
3. Install the interior courtesy lamp lens.
4. Connect the negative battery cable.
D29B007
DAYTIME RUNNING LAMP MODULE
(W/Europe Only)
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector (1).
3. Remove the screws (2) and the daytime running lamp
module.
D29B008
Installation Procedure
1. Install the daytime running lamp module with the
bolts.
2. Connect the electrical connector.
3. Connect the negative battery cable.

LIGHTING SYSTEMS 9B–15
DAEWOO M-150 BL2
D209B104
LUGGAGE ROOM LAMP
Removal Procedure
1. Disconnect the negative battery cable.
2. Open the tailgate.
3. Remove the luggage room lamp.

Remove the luggage room lamp (1).

Disconnect the electrical connector (2).
D209B105
Installation Procedure
1. Connect the electrical connector.
2. Install the luggage room lamp.
3. Connect the negative battery cable.

9B–16 LIGHTING SYSTEMS
DAEWOO M-150 BL2
SPECIFICATIONS
BULB USAGE CHART
BulbReplacement Bulb Number
Backup Lamp(s)21W
Center High Mounted Stoplamp21W
HeadlampsDouble 60/55W
Interior Courtesy Lamp10W
License Plate Lamp5W
Front Turn Signal Lamps21W
Rear Fog Lamp21W
Rear Turn Signal Lamps21W
Side Marker Turn Signal Lamps5W
Tail and StoplampDouble 5/21W, 5W
Parking Lamp5W

LIGHTING SYSTEMS 9B–17
DAEWOO M-150 BL2
SCHEMATIC AND ROUTING DIAGRAMS
BACKUP LAMP(S) CIRCUIT
D19D201B