Page 1017 of 1184
INTERIOR TRIM 9G–5
DAEWOO M-150 BL2
D109E535
4. Pry off the trim panel using a trim remover KM 475–B.
Notice: Make sure to cover the remover with cloth to
prevent the paint damage of the door.
D109E536
Installation Procedure
1. Install the trim panel.
2. Install the window regulator handle with the clip.
3. Install the inside door handle and the door pull with
the screws.
D19E537A
FRONT DOOR TRIM PANEL
(DELUXE)
Removal Procedure
1. Remove the inside door handle. Refer to Section 9P,
Doors.
2. Remove the power window/mirror control switch as-
sembly from the front door.
Remove the screws (1).
Remove the power window/mirror control switch
assembly (2).
Disconnect the electrical connectors (3).
D19E538A
3. Remove the trim panel.
Remove the screws (1).
Remove the clips (2).
Remove the trim panel (3).
Page 1018 of 1184
9G –6 INTERIOR TRIM
DAEWOO M-150 BL2
D109E539
4. Remove the inside channel weatherstrip. Refer to
Section 9P, Doors.
5. Remove the map pocket from the door trim.
Remove the screws (1).
Remove the map pocket (2).
D19E540A
Installation Procedure
1. Install the map pocket to the door trim with the
screws.
2. Install the inside channel weatherstrip. Refer to Sec-
tion 9P, Doors.
3. Install the door trim panel with the screws and the
clips.
4. Install the power window/mirror control switch assem-
bly with the screw.
5. Install the inside door handle. Refer to Section 9P,
Doors.
D109E541
2
REAR DOOR TRIM PANEL
(STANDARD)
Tool Required
KM 475–B Trim Remover.
Removal Procedure
1. Remove the inside door handle.
Remove the screw (1).
Disconnect the inside door handle rod.
Pry off the inside door handle (2).
D109E542
2. Remove the door pull.
Remove the screws (1).
Remove the door pull (2).
Page 1019 of 1184
INTERIOR TRIM 9G–7
DAEWOO M-150 BL2
D109E543
3. Remove the window regulator handle from the rear
door.
Using a cloth, pull out the clip (1).
Remove the regulator handle (2).
D109E544
4. Pry off the trim panel using a trim remover KM 475–B.
Notice: Make sure to cover the remover with cloth to
prevent the paint damage of the door.
D109E545
Installation Procedure
1. Install the trim panel.
2. Install the window regulator handle with the clip.
3. Install the inside door handle and the door pull with
the screws.
D109E546
REAR DOOR TRIM PANEL (DELUXE)
Removal Procedure
1. Remove the inside door handle. Refer to Section 9P,
Doors.
2. Remove the window regulator handle from the rear
door. Refer to Section 9P, Doors.
3. Remove the door pull.
Remove the screw (1).
Remove the door pull (2).
Page 1020 of 1184
9G –8 INTERIOR TRIM
DAEWOO M-150 BL2
D109E547
4. Remove the trim panel.
Remove the screws (1).
Remove the clips (2).
Remove the trim panel (3).
5. Remove the inside channel weatherstrip. Refer to
Section 9P, Doors.
D109E548
Installation Procedure
1. Install the inside channel weatherstrip. Refer to Sec-
tion 9P, Doors.
2. Install the trim panel with the screws and the clips.
3. Install the door pull with the screw.
4. Install the window regulator handle. Refer to Section
9P, Doors.
5. Install the inside door handle. Refer to Section 9P,
Doors.
D109E549
REAR DOOR INTERIOR GARNISH
MOLDING
Removal Procedure
1. Pry off interior garnish molding.
Pry off the garnish molding caps (1).
D109E550
Installation Procedure
1. Install the interior garnish molding.
Page 1021 of 1184
INTERIOR TRIM 9G–9
DAEWOO M-150 BL2
D109E551
REAR DOOR EXTERIOR GARNISH
MOLDING
Removal Procedure
1. Pry off the interior garnish molding. Refer to “Rear
Door Interior Garnish Molding” in this section.
2. Pry off the exterior garnish molding.
Remove the screw (1).
Pry off exterior garnish molding (2).
D109E552
Installation Procedure
1. Install the exterior garnish molding with the screw.
2. Install the interior garnish molding. Refer to “Rear
Door Interior Garnish Molding” in this section.
D19E553A
TAILGATE TRIM PANEL
Removal Procedure
1. Open the tailgate.
2. Remove the trim from the tailgate.
Remove the clips by pushing the center of the clip
(1).
Remove the trim (2).
D19E554A
Installation Procedure
1. Install the trim to the tailgate.
Notice: In case of the loose clips, replace the clips with
the new ones.
Page 1022 of 1184
9G –10 INTERIOR TRIM
DAEWOO M-150 BL2
D109E555
A–PILLAR TRIM PANEL
Removal Procedure
1. Pry off the A–pillar trim panel (1).
D109E556
Installation Procedure
1. Install the A–pillar trim panel.
D109E557
UPPER B–PILLAR TRIM PANEL
Removal Procedure
1. Remove the bolt on the upper B–pillar trim panel. Re-
fer to Section 8A, Seat Belts.
2. Pry off the upper B–pillar trim panel.
Pry off the upper B–pillar trim panel by hands (1).
D109E558
Installation Procedure
1. Install the upper B–pillar trim panel.
2. Install the bolt on the upper B–pillar trim panel. Refer
to Section 8A, Seat Belts.
Page 1023 of 1184
INTERIOR TRIM 9G–11
DAEWOO M-150 BL2
D110A501
LOWER B–PILLAR TRIM PANEL
Removal Procedure
1. Remove the bolt on the lower B–pillar trim panel.
Remove the bolt (1).
Remove the spacer and the spring washer (2).
Remove the plastic protector from the seat belt an-
chor.
D109E559
2. Pry off the lower B–pillar trim panel.
D109E560
Installation Procedure
1. Install the lower B–pillar trim panel.
2. Install the bolt on the lower B–piller trim panel. Refer
to Section 8A, Seat Belts.
D109E561
C–PILLAR TRIM PANEL
Removal Procedure
1. Disconnect the negative battery cable.
2. Open the tailgate.
3. Disconnect the rear speaker electrical connector.
Page 1024 of 1184
9G –12 INTERIOR TRIM
DAEWOO M-150 BL2
D109E562
4. Remove the rear parcel side shelf. Refer to “Rear
Parcel Side Shelf” in this section.
5. Remove the rear seatback.
6. Remove the rear seat belt bolt on the C–pillar trim
panel. Refer to Section 8A, Seat Belts.
7. Pry off the C–pillar trim panel.
Pry off the C–pillar trim panel by hands (1).
D109E563
Installation Procedure
1. Install the C–pillar trim panel.
2. Install the rear seat belt bolt on the C–pillar trim panel.
Refer to Section 8A, Seat Belts.
3. Install the rear seatback.
4. Install the rear parcel side shelf. Refer to “Rear Parcel
Side Shelf” in this section.
5. Connect the rear speaker connector.
6. Connect the negative battery cable.
D109E564
REAR PARCEL SHELF
Removal Procedure
1. Open the tailgate.
2. Remove the rear parcel shelf (1).
D109E565
Installation Procedure
1. Install the rear parcel shelf.