2017 MAZDA MODEL CX-5 Owners Manual (in English)

4–161
When Driving
i-ACTIVSENSE
  If the Forward Sensing Camera (FSC) detects that the windshield is dirty or foggy,
the system functions related to the Forward Sensing Camera (FSC) are temporarily
stopped and the following warning lights turn on. However, this does not indicate a
problem. Remove the dirt from the windshield or press the defroster switch and defog the
windshield.
  High Beam Control System (HBC) warning light (amber)   Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) warning
indication
  Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) warning indication
  Smart Brake Support/Smart City Brake Support (SBS/SCBS) warning indica\
tion/
warning light (amber)
  If there are recognizable cracks or damage caused by fl ying gravel or debris on the
windshield, always have the windshield replaced. Consult an Authorized Mazda Dealer
for replacement.

CX-5_8FN1-EA-16L_Edition1.indb 1612016/12/12 10:06:17

4–162
When Driving
i-ACTIVSENSE
*Some models.
Radar Sensor (Front) *
Your vehicle is equipped with a radar sensor (front).
The following systems also use the radar sensor (front).
  Distance Recognition Support System (DRSS)  Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go\
function)  Smart Brake Support (SBS)
The radar sensor (front) functions by detecting the radio waves re fl ected off a vehicle ahead
or an obstruction sent from the radar sensor.
The radar sensor (front) is mounted behind the front emblem.

Radar sensor (front)

If “Front Radar Sensor Blocked” is displayed in the multi-informat\
ion display of the
instrument cluster, clean the area around the radar sensor (front).
CX-5_8FN1-EA-16L_Edition1.indb 1622016/12/12 10:06:17

4–163
When Driving
i-ACTIVSENSE
CAUTION
Heed the following precautions to assure correct operation of each system.  Do not adhere stickers (including transparent stickers) to the surface of the radiator grille and front emblem in and around the radar sensor (front), and do not replace
the radiator grille and front emblem with any product that is not a genuine product
designed for use with the radar sensor (front).
 The radar sensor (front) includes a function for detecting soiling of the radar sensor's front surface and informing the driver, however, depending on the conditions, it may
require time to detect or it may not detect plastic shopping bags, ice or snow. If this
occurs, the system may not operate correctly, therefore always keep the radar sensor
(front) clean.
 Do not install a grille guard. If the front part of the vehicle has been damaged in a vehicle accident, the position of the radar sensor (front) may have moved. Stop the system immediately and always
have the vehicle inspected at an Authorized Mazda Dealer.
 Do not use the front bumper to push other vehicles or obstructions such as when pulling out of a parking space. Otherwise, the radar sensor (front) could be hit and its
position deviated.
 Do not remove, disassemble, or modify the radar sensor (front). For repairs, replacement or paint work around the radar sensor (front), consult an Authorized Mazda Dealer.
 Do not modify the suspension. If the suspension are modifi ed, the vehicle's posture could change and the radar sensor (front) may not be able to correctly detect a vehicle
ahead or an obstruction.

CX-5_8FN1-EA-16L_Edition1.indb 1632016/12/12 10:06:18

4–16 4
When Driving
i-ACTIVSENSE
NOTE
  Under the following conditions, the radar sensor (front) may not be able to detect
vehicles ahead or obstructions correctly and each system may not operate normally.
  The rear surface of a vehicle ahead does not re fl ect radio waves effectively, such as
an unloaded trailer or an automobile with a loading platform covered by a soft top,
vehicles with a hard plastic tailgate, and round-shaped vehicles.
   Vehicles ahead with low vehicle height and thus less area for re fl ecting radio waves.   Visibility is reduced due to a vehicle ahead casting off water, snow, or sand from its
tires and onto your windshield.
  The luggage compartment is loaded with heavy objects or the rear passenger seats are
occupied.
  Ice, snow, or soiling is on the front surface of the front emblem.  During inclement weather such as rain, snow, or sand storms.  When driving near facilities or objects emitting strong radio waves.   Under the following conditions, the radar sensor (front) may not be able to detect
vehicles ahead or obstructions.
  The beginning and end of a curve.  Roads with continuous curves.  Narrow lane roads due to road construction or lane closures.  The vehicle ahead enters the radar sensor's blind spot.  The vehicle ahead is running abnormally due to accident or vehicle damag\
e.  Roads with repeated up and down slopes  Driving on poor roads or unpaved roads.  The distance between your vehicle and the vehicle ahead is extremely short.  A vehicle suddenly comes close such as by cutting into the lane.   To prevent incorrect operation of the system, use tires of the same speci fi ed size,
manufacturer, brand, and tread pattern on all four wheels. In addition, do not use tires
with signifi cantly different wear patterns or tire pressures on the same vehicle (Including
the temporary spare tire).
   If the battery power is weak, the system may not operate correctly.  When driving on roads with little traf fi c and few vehicles ahead or obstructions for
the radar sensor (front) to detect, “Front Radar Sensor Blocked” may be temporarily
displayed, however, this does not indicate a problem.

CX-5_8FN1-EA-16L_Edition1.indb 1642016/12/12 10:06:18

4–165
When Driving
i-ACTIVSENSE
*Some models.
Radar Sensors (Rear) *
Your vehicle is equipped with radar sensors (rear). The following systems also use the radar
sensors (rear).
  Blind Spot Monitoring system (BSM)  Rear Cross Traffi c Alert (RCTA)
The radar sensors (rear) function by detecting the radio waves re fl ected off a vehicle
approaching from the rear or an obstruction sent from the radar sensor.

Radar sensors (rear)

The radar sensors (rear) are installed inside the rear bumper, one each on the left and right
sides.
Always keep the surface of the rear bumper near the radar sensors (rear\
) clean so that the
radar sensors (rear) operate normally. Also, do not apply items such as stickers.
Refer to Exterior Care on page 6-56 .
CAUTION
If the rear bumper receives a severe impact, the system may no longer operate normally.
Stop the system immediately and have the vehicle inspected at an Authorized Mazda
Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 1652016/12/12 10:06:18

4–16 6
When Driving
i-ACTIVSENSE
NOTE
  The detection ability of the radar sensors (rear) has limitations. In the following cases,
the detection ability may lower and the system may not operate normally.
  The rear bumper near the radar sensors (rear) has become deformed.  Snow, ice or mud adheres to the radar sensors (rear) on the rear bumper.  Under bad weather conditions such as rain, snow and fog.   Under the following conditions, the radar sensors (rear) cannot detect target objects or it
may be dif fi cult to detect them.
   Stationary objects on a road or a road side such as small, two-wheeled vehicles,
bicycles, pedestrians, animals, and shopping carts.
  Vehicle shapes which do not re fl ect radar waves well such as empty trailers with a low
vehicle height and sports cars.
   Vehicles are shipped with the direction of the radar sensors (rear) adjusted for each
vehicle to a loaded vehicle condition so that the radar sensors (rear) detect approaching
vehicles correctly. If the direction of the radar sensors (rear) has deviated for some
reason, have the vehicle inspected at an Authorized Mazda Dealer.
  For repairs or replacement of the radar sensors (rear), or bumper repairs, paintwork,
and replacement near the radar sensors, consult an Authorized Mazda Dealer.
  Turn off the system while pulling a trailer or while an accessory such as\
a bicycle carrier
is installed to the rear of the vehicle. Otherwise, the radio waves emitted by the radar will\

be blocked causing the system to not operate normally.
  The radar sensors are regulated by the relevant radio wave laws of the country in which
the vehicle is driven. If the vehicle is driven abroad, authorization from the country in
which the vehicle is driven may be required.

CX-5_8FN1-EA-16L_Edition1.indb 1662016/12/12 10:06:18

4–167
When Driving
Cruise Control
*Some models.
Cruise Control *
With cruise control, you can set and automatically maintain any speed of \
more than about
25 km/h (16 mph).
WARNING
Do not use the cruise control under the following conditions: Using the cruise control under the following conditions is dangerous and could result in
loss of vehicle control.
 Hilly terrain Steep inclines Heavy or unsteady traffi c Slippery or winding roads Similar restrictions that require inconsistent speed
Cruise Control Switch

ON switch RESUME/+ switch
SET/- switch
OFF/CANCEL switch

NOTE
If your Mazda has the following steering switch, your Mazda is equipped \
with the Mazda
Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system.
Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) on page 4-121 .

CANCEL switch RES switch
OFF switch
switch switch
MODE switch
SET- switch
SET+ switch

CX-5_8FN1-EA-16L_Edition1.indb 1672016/12/12 10:06:18

4–16 8
When Driving
Cruise Control
Cruise Main Indication (White)/Cruise Set Indication (Green)

The indication has two colors.
Cruise Main Indication (White)
The indication turns on (white) when the
cruise control system is activated.
Cruise Set Indication (Green)
The indication turns on (green) when a
cruising speed has been set.
Activation/Deactivation
To activate the system, press the ON
switch. The cruise main indication (white)
turns on.
To deactivate the system, press the OFF/
CANCEL switch.
The cruise main indication (white) turns
off.
WARNING
Always turn off the cruise control system
when it is not in use: Leaving the cruise control system in an
activation-ready state while the cruise
control is not in use is dangerous as
the cruise control could unexpectedly
activate if the activation button is
accidentally pressed, and result in loss
of vehicle control and an accident.

NOTE
When the ignition is switched OFF, the
system status before it was turned off is
maintained. For example, if the ignition
is switched OFF with the cruise control
system operable, the system will be
operable when the ignition is switched ON
the next time.

To Set Speed
1. Activate the cruise control system by pressing the ON switch. The cruise
main indication (white) turns on.
2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).
3. Set the cruise control by pressing the SET/
switch at the desired speed. The
cruise control is set at the moment the
SET/
switch is pressed. Release the
accelerator pedal simultaneously. The
cruise set indication (green) turns on.

CX-5_8FN1-EA-16L_Edition1.indb 1682016/12/12 10:06:18