2002 NISSAN TERRANO Service Repair Manual

Alignment
IAll dimensions indicated in figures are actual ones.
IWhen using a tracking gauge, adjust both pointers to equal length. Then check the pointers and gauge
itself to make sure there is no free play.
IWhen a measuring tape is used, check to be sure there is no elongation, twisting or bending.
IMeasurements should be taken at the center of the mounting holes.
IAn asterisk (*) following the value at the measuring point indicates that the measuring point on the other
side is symmetrically the same value.
IThe coordinates of the measurement points are the distances measured from the standard line of ªXº, ªYº
and ªZº.
YBT089
BODY (ALIGNMENT)
BT-49

ENGINE COMPARTMENT
Measurement
Unit: mm (in)
NBF021
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-50

Detailed Measurement Points
PointsHole dia.
mm (in)Detailed pointsCoordinates mm (in)
ªXº ªYº ªZº
q
A8 (0.32)
NBF022
Cowl top hole at
vehicle center0.0
(0.00)250.0
(9.84)760.9
(29.96)
q
Bqb11 (0.43)
NBF023
Cowl top side
hole698.5
(27.50)þ110.1
(þ4.34)624.7
(24.59)
q
Dqd8 (0.32)
NBF024
Upper radiator
core support
location hole691.0
(27.20)þ459.5
(þ18.09)548.0
(21.58)
q
Hqh16 (0.63)Side radiator
core support
location hole680.0
(26.77)þ551.7
(þ21.72)400.0
(15.75)
q
1: Coordinate indicated isLH,RHcoordinate is -LHcoordinate.
E.g. ifLHcoordinate is: 698.5,RHcoordinate is: þ698.5.
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-51

PointsHole dia.
mm (in)Detailed pointsCoordinates mm (in)
ªXº ªYº ªZº
q
E9 (0.35)
NBF025
Hood lock stay
mounting hole
on upper radia-
tor core support37.0
(1.46)þ589.0
(þ23.19)494.0
(19.45)
q
I
Lower radiator
core support
mounting hole0.0
(0.00)þ581.1
(þ22.88)þ54.1
(þ2.13)
q
Gqg12 (0.47)Lower radiator
core support
location hole280.0
(11.02)þ608.9
(þ23.97)þ23.0
(þ0.91)
q
Cqc7.2 (0.28)
NBF027
Front fender
mounting hole
on hoodledge698.5
(27.50)þ110.1
(þ4.34)624.7
(24.59)
q
1: Coordinate indicated isLH,RHcoordinate is -LHcoordinate.
E.g. ifLHcoordinate is: 698.5,RHcoordinate is: þ698.5.
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-52

UNDERBODY
Measurement (Hardtop model)
NBF028
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-53

NBF029
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-54

UNDERBODY
Measurement (Wagon model)
NBF030
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-55

NBF031
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-56