2020 MITSUBISHI L200 Owner's Manual (in English)

NOTEzPressing the LOCK switch (A) on the key
once while the Dead Lock System is set cau-ses the turn-signal lamps to blink three
times, so it is possible to confirm that the Dead Lock System is set.Cancelling the system
When the following operation is performed,
the doors will unlock and the Dead Lock Sys- tem will be simultaneously cancelled.
z The UNLOCK switch (B) on the key is
pressed.
z The driver’s or front passenger’s door
lock/unlock switch (C) is pressed while
you are carrying the keyless operation key.
NOTEz If a door is not opened within 30 seconds of
unlocking, the doors are automatically re-
locked and the Dead Lock System is simul-
taneously set again.
z Even when it is not possible to use the key-
less entry system or keyless operation func- tion to unlock the doors, it is possible to use
the key to unlock the driver’s door. When
the key is used to unlock the driver’s door, the Dead Lock System is cancelled for onlythe driver’s door. If you wish to subsequent-
ly unlock all other doors, turn the ignition switch to the “ON” or “ACC” position, or
put the operation mode in ON or ACC.
z It is possible to adjust the time between
pressing the UNLOCK switch (B) on the key or the driver’s or front passenger’s door
lock/unlock switch (C) and automatic lock-
ing. For details, please contact a MITSUBISHI MOTORS Authorized Serv-
ice Point.
z It is possible to lock the doors and set the
Dead Lock System at the same time with a
single push of the LOCK switch (A) on the
key, the driver’s or front passenger’s door lock/unlock switch (C). For details, please
contact a MITSUBISHI MOTORS Author-
ized Service Point.Testing the system
Open all of the door windows, then set the
Dead Lock System.
(Refer to “Setting the system” on page 3-18.)
After setting the Dead Lock System, reach
into the vehicle through a window and con-
firm that you cannot unlock the doors using the lock knobs.NOTEz If you need advice on how to set the Dead
Lock System, please contact a MITSUBISHIMOTORS Authorized Service Point.“Child-protection” rear
doors (Double cab)
1- Lock
2- Unlock
Child protection helps prevent doors from be-
ing opened accidentally, especially when small children are in the rear seat.
A lever is provided on each rear door.
“Child-protection” rear doors (Double cab)
3-192.7(20(1Locking and unlocking3

If the lever is set to the locked position, therear door cannot be opened using the inside
handle.
To open the rear door while the child protec- tion is in use, pull the outside door handle.
If the lever is set to the “Unlock” position,
the child protection mechanism does not function.CAUT,ONz When driving with a child in the rear seat,
please use the child protection to prevent ac-
cidental door opening which may cause an accident.Rear gateCAUT,ONz Do not stand behind the exhaust pipe when
loading and unloading luggage. Heat fromthe exhaust could lead to burns.
z Pay attention not to catch your fingers in the
rear gate.
z Do not weight the rear gate.
z Before driving, make sure that the rear gate
is securely closed. If the rear gate opens
while driving the vehicle, objects stored in
the cargo area could fall out onto the road.To open
Lift up the handle and lower the rear gate.
To close
Raise the rear gate and close with enough
force to latch the assembly securely into posi-
tion.
To swing down
The rear gate can be swung down in two
stages except some models. To lower it to the
second stage, proceed as follows:
CAUT,ONz On vehicles with the rear bumper, never
swing down the rear gate because the rear
gate could be damaged.
1. Swing open the rear gate to the first po-
sition. Then, lift it up to the position shown in the illustration while holding
the wire (A).
Rear gate
3-202.7(20(1Locking and unlocking3

2.Remove the wire (A) on one side while
aligning the hole in the wire with the hook (B).
3. Remove the wire on the other side in the
same manner, and have the rear gate
swing down slowly.
CAUT,ONz Never close the rear gate with the wire left
unhooked.Manual window control*
1- To open
2- To close
Electric window control*
The electric windows can only be operated with the ignition switch or the operation
mode in ON.
Electric window control switch
Each door window opens or closes while the
corresponding switch is operated.
1- Driver’s door window
2- Front passenger’s door window
3- Rear left door window (Double cab)
4- Rear right door window (Double cab)
5- Lock switch
:ARN,NGz Before operating the electric window con-
trol, make sure that nothing can get trap-ped (head, hand, finger, etc.).
z Never leave the vehicle without removing
the key.
z Never leave a child (or other person who
might not be capable of safe operation of the electric window control) in the vehicle alone.
Manual window control*
3-212.7(20(1Locking and unlocking3 Driver’s switch
LHDDriver’s switch
RHD

:ARN,NGzThe child may tamper with the switch at
the risk of its hands or head being trap-
ped in the window.
Driver

Safety mechanism (driver

2.7(20(1

Seat adjustment................................................................................... 4-02Front seats........................................................................................... 4-02
Rear seat (Club cab and Double cab)*................................................ 4-04
Head restraints*...................................................................................4-05
Seat belts............................................................................................. 4-07 Pregnant women restraint....................................................................4-10
Seat belt pretensioner system and force limiter system*.................... 4-10
Child restraint...................................................................................... 4-11 Seat belt inspection............................................................................. 4-23Supplemental restraint system (SRS)-airbag...................................... 4-246eatandseatbelts
2.7(20(14

Seat adjustment
Adjust the driver’s seat so that you are com- fortable and that you can reach the pedals,
steering wheel, switches etc. while retaining a clear field of vision.:ARN,NGz Do not attempt to adjust the seat while
driving. This can cause loss of vehicle con- trol and result in an accident. After ad-
justments are made, ensure the seating is
locked in position by attempting to move
the seat forward and rearward without using the adjusting mechanism.
z It is extremely dangerous to ride in the
cargo area (inside or outside) of a vehicle. Also, the cargo area and rear seats shouldnever be used as a play area by children.
In a collision, people or children riding unrestrained in these areas are more like- ly to be seriously injured or killed.
z Do not allow people or children to ride in
any area of your vehicle that is not equip- ped with seats and seat belts, and make
sure that everyone travelling in your vehi- cle is in a seat and wearing a seat belt, or
in the case of a child is strapped in a child restraint.:ARN,NGz To minimize the risk of personal injury in
the event of a collision or sudden braking,the seatbacks should always be in the al- most upright position while the vehicle is
in motion. The protection provided by the seat belts may be reduced significantly when the seatback is reclined. There is
greater risk that the passenger will slide
under the seat belt, resulting in serious in- jury, when the seatback is reclined.
z Do not place objects under the seats. This
could prevent the seat from locking se- curely, and it could lead to an accident. It
may also cause damage to the seat or oth-
er parts.CAUT,ONz Make sure the seat is adjusted by an adult or
with adult supervision for correct and safe operation.
z Do not place a cushion or the like between
your back and the seatback while driving.The effectiveness of the head restraints will
be reduced in the event of an accident.
z The reclining mechanism of the front man-
ual seat’s seatback is spring loaded, causing it to fold the seatback forward when the lock lever is operated. When using the lever, sit
close to the seatback or hold it with your hand to control its return motion.
z When sliding the seats, be careful not to
catch your hand or foot.CAUT,ONz When sliding or reclining the seat rearward,
pay careful attention to the rear seat passen-
gers.Front seats
Manual type
1- To adjust forward or backward
Lift the handle and adjust the seat to the
desired position, and release the handle.
2- To recline the seatback Pull the lever up and then lean backwardto the desired position, and release the lever.
3- To adjust seat cushion height (driver’s
side only)
Turn the dial and adjust the seat cushion
height to the desired position.
Seat adjustment
4-022.7(20(1Seat and seat belts4