2012 SSANGYONG KORANDO Service Manual

05-26
When the ignition is switched off, the message "GOOD-BYE" is displayed for 2 seconds and disappears.
The other LCDs go off as soon as the ignition is switched off.
The dial and pointer dim down for 2 seconds and go off at the same time when the DOT LCD goes off. 7.

05-278010-01
Operations for power supply in STD ▶
The operation input before the LCD backlight is illuminated, right after the ignition is turned OFF or ON,
is ignored.
<007b008f008c00470073006a006b004700890088008a009200930090008e008f009b004700880095008b00470096009b008f008c009900470093008800940097009a004700880099008c0047009000930093009c0094009000950088009b008c008b004700
570055005b004700b70057005500580047009a008c008a0096>nd after the ignition ON is
detected.
The LCD display, LCD backlight, dial lamp and indicator lamp are turned on or off by the ignition
switch ON/OFF operation. -
-
-

05-28
Brightness in SVC ▶
(2) Illumination Level
Brightness in STD ▶
Operating power Illumination levelMain LCD Dial pointer
Day Night Day Night
B+
(B-CAN Wake UP)- OFF OFF OFF OFF
IGN1Level 1 100% 20% 100% 20%
Level 2 100% 30% 100% 30%
Level 3 100% 40% 100% 40%
Level 4 100% 50% 100% 50%
Level 5 100% 60% 100% 60%
Level 6 100% 70% 100% 70%
Operating powerIllumination
previousDOT LCD ODO, GAGE LCDDial
pointer
Day Night Day Night Day Night
B+
(B-CAN
Wake
UP)After
-Level 6 Level 6OFF (however, level 6 for initial
operation with B+ & IGN1 ON)
After
1st timeMaintains
previous
levelMaintains
previous
levelOFF (however, maintains previous level
for initial operation with B+ & IGN1 ON)
IGN1Level 1 25% 5% 25% 5% 25% 5%
Level 2 40% 12% 40% 12% 40% 12%
Level 3 55% 19% 55% 19% 55% 19%
Level 4 70% 26% 70% 26% 70% 26%
Level 5 85% 33% 85% 33% 85% 33%
Level 6 100% 40% 100% 40% 100% 40%

05-298010-01
(1) SVC
Symbols in SVC ▶
6) System Analysis

05-30
Symbols in SVC (via CAN) ▶

05-318010-01
The pre-warning of the MICOM control warning is performed 400 ms after turning the ignition switch to
ON position.
IGN ON detecting time: 40~80 ms after turning ignition switch to ON position -
- The pre-warning is performed for 4 seconds after turning the ignition switch to ON position. BCM checks
that the warning lamps (ABS, ESP, ESP OFF, 4WD CHECK, 4WD LOCK) are matched with CAN
signals.
The pre-warning is performed by the variant code.

05-32
(2) STD
Symbols in STD ▶

05-338010-01
The pre-warning of the MICOM control warning is performed 400 ms after turning the ignition switch
to ON position.
IGN ON detecting time: 40~80 ms after turning ignition switch to ON position -
- The pre-warning is performed for 4 seconds after turning the ignition switch to ON position. BCM checks
that the warning lamps (ABS, ESP, ESP OFF, 4WD CHECK, 4WD LOCK) are matched with CAN
signals.
The pre-warning is performed by the variant code.