2020 MITSUBISHI OUTLANDER PHEV Owner's Manual (in English)

7.When the deletion of the telephone num-
ber is completed, the voice guide will say “<name> <location> deleted” and
then the system will return to the main menu.
If all locations are deleted, the system
will say “<name> and all locations de- leted” and the name will be removed
from the phone book. If numbers still re- main under the entry, the name will re-
tain the other associated numbers.Erasing the phone book
You can delete all registered information from the vehicle phone book. 1. Press the SPEECH button.
2. Say “Phone book.”
3. The voice guide will say “Select one of
the following: new entry, edit number,
edit name, list names, delete, erase all, or
import contact.” Say “Erase all.”
4. For confirmation purposes, the voice
guide will ask “Are you sure you want toerase everything from your hands-free system phone book?” Answer “Yes.”
Answer “No” to cancel the deletion of
all registered information in the phone
book and return to the main menu.
5. The voice guide will say “You are about
to delete everything from your hands- free system phone book. Do you want to
continue?” Answer “Yes” to continue.
Answer “No” to cancel the deletion of
all registered information in the phone book and return to the main menu.
6. The voice guide will say “Please wait,
erasing the handsfree system phone
book” and then the system will delete all data in the phone book.
When the deletion is complete, the voice guide will say “Hands-free system phone
book erased” and then the system will
return to the main menu.Mobile phone book
All entries in the phone book stored in the cellular phone can be transferred in a batch
and registered in the mobile phone book.
Up to 7 mobile phone books, each containing
up to 1,000 names, can be registered.

The Bluetooth

NOTEzThe maximum supported telephone number
length is 19 digits. Any telephone number of
20 digits or more will be truncated to the first 19 digits.
z If telephone numbers contain characters oth-
er than 0 to 9, *, # or +, these characters aredeleted before the transfer.
z For the connection settings on the cellular
phone side, refer to the instructions for the
cellular phone.
1. Press the SPEECH button.
2. Say “Phone book.”
3. The voice guide will say “Select one of
the following: new entry, edit number, edit name, list names, delete, erase all, or
import contact.” Say “Import contact.”
4. The voice guide will say “Would you
like to import a single entry or all con-
tacts?” Say “All contacts.”
5. The voice guide will say “Importing the
contact list from the mobile phone book.
This may take several minutes to com-
plete. Would you like to continue?” An- swer “Yes,” transferring to the mobile
phone book the phone book stored in the cellular phone will start.
Answer “No,” to return to the main menu.
NOTEz The transfer may take some time to com-
plete depending on the number of contacts.
z If the Bluetooth

Enrollment commands

USB input terminal*
You can connect your USB memory device or iPod* to play music files stored in the
USB memory device or iPod.

*: “iPod” is a registered trademark of Apple
Inc. in the United States and other countries.

This section explains how to connect and re- move a USB memory device or iPod.
See the following section for details on how
to play music files.

Refer to “Listening to an iPod” on page 8-33.Refer to “Listen to Audio Files on a USB De-
vice” on page 8-35.
Refer to “To play iPod/USB memory device
tracks via voice operation” on page 8-37.USB input terminal locations
The USB input terminal (A) is located in the illustrated positions.USB input terminal*
8-712**(20(1For pleasant driving8 Instrument panel

How to connect a USB memorydevice
1. Park your vehicle in a safe place and put
the operation mode in OFF.
2. Open the USB input terminal cover.
3. Connect a commercially available USB
connector cable (A) to the USB memory
device (B).
4. Connect the USB connector cable to the
USB input terminal.NOTEz Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
5. To remove the USB connector cable, put
the operation mode in OFF first and per- form the installation steps in reverse.
How to connect an iPod
1. Park your vehicle in a safe place and put
the operation mode in OFF.
2. Open the USB input terminal cover. 3. Connect the connector cable to the iPod.
NOTEz Use a genuine connector cable from Apple
Inc.
4. Connect the connector cable to the USB
input terminal.
5. To remove the connector cable, put the
operation mode in OFF first and perform the installation steps in reverse.
Types of connectable devices
and supported file specifica- tions
Except for vehicles equipped with the Bluetooth

Model nameConditionUSB memory deviceStorage capacity
of 256 Mbytes or
more (File System is FAT16/32)Models other than USBmemory devices and
iPodsDigital audio play- er supporting mass
storage class
For connectable device type for “iPod *
,”
“iPod classic *
,” “iPod nano *
,” “iPod touch *
”
and “iPhone *
,” access the MITSUBISHI
MOTORS website.
Please read and agree to the “Warning about Links to the Web Sites of Other Companies”.
The websites mentioned above may connect you to websites other than the MITSUBISHI
MOTORS website.
http://www.mitsubishi-motors.com/en/prod- ucts/index.html
NOTEz Depending on the type of the USB memory
device or other devices connected, the con-
nected device may not function properly or the available functions may be limited.* “iPod”, “iPod classic”, “iPod nano”, “iPod
touch” and “iPhone” are registered trade-marks of Apple Inc. in the United States and other countries.NOTEz It is recommended to use an iPod with firm-
ware updated to the latest version.
z You can charge your iPod by connecting it to
the USB input terminal when the operation mode is in ON or ACC.
z Do not keep your USB memory device or
iPod in your vehicle.
z It is recommended that you back up files in
case of data damage.
z Do not connect to the USB input terminal
any device (hard disk, card reader, memory
reader, etc.) other than the connectable devi- ces specified in the previous section. The de- vice and/or data may be damaged. If any of
these devices was connected by mistake, re- move it after putting the operation mode inOFF.File specifications
You can play music files of the following
specifications that are saved in a USB memo-ry device or other devices supporting mass
storage class. When you connect your iPod, playable file specifications depend on the connected iPod.
ItemConditionFile formatMP3, WMA, AAC,
WAVMaximum number of levels
(including the root)
Level 8
ItemConditionNumber of folders700Number of files65,535Sun visors
1- To eliminate front glare
2- To eliminate side glare
Vanity mirror
A vanity mirror is fitted to the back of the sun visor.
Sun visors
8-732**(20(1For pleasant driving8

Operating the lid of the vanity mirror will au-tomatically turn on the mirror lamp (A).CAUT,ONz If the lid of the vanity mirror with lamp is
kept open for prolonged periods of time, the
auxiliary battery will be discharged.Ticket holder
The holder (B) is located on the back of the
sun visor.
CAUT,ONz Do not leave plastic cards in the ticket hold-
er. Because the inside of the vehicle will be-
come hot if the vehicle is parked in strong sunlight, the cards could deform or crack.Ashtray*CAUT,ONz Put out matches and cigarettes before they
are placed in the ashtray.
z Don’t put papers and other things that burn
into your ashtrays. If you do, cigarettes or
other smoking materials could set them on fire, causing damage.CAUT,ONz Always close the ashtray. If left open, other
cigarette butts in the ashtray may be rekin-
dled.
To use the ashtray, open the lid.
Ashtray*
8-742**(20(1For pleasant driving8

Mounting position for movea-ble ashtray
The moveable ashtray can be fitted at the in- dicated position.
Cigarette lighter*
The cigarette lighter can be used while the
operation mode is in ON or ACC.
1- Push all the way in.
The cigarette lighter will automatically return to its original position with a “click” when ready. Pull it out for use.
After use, insert the cigarette lighter to its
original position in the socket.NOTEz Do not leave the cigarette lighter removed
from its socket, because the socket might be- come clogged by foreign material and be
short-circuited.CAUT,ONz Do not touch the heating element or the cig-
arette lighter housing, hold the knob only to prevent burns.
z Do not allow children to operate or play with
the cigarette lighter as burns may occur.
z Something is wrong with the cigarette light-
er if it does not pop back out within approxi-
mately 30 seconds of being pushed in.
Pull it out and have the problem corrected at MITSUBISHI MOTORS Authorized Serv-
ice Point.
z Do not use any electric appliance that is not
approved by MITSUBISHI MOTORS . Do-
ing so could damage the socket. If you used the cigarette lighter after damaging the sock-
et, the cigarette lighter might pop out or fail to come out after being pushed in.CAUT,ONz When the cigarette lighter socket is used as a
power source for an electric appliance, be sure that the electric appliance operates at
12 V and has an electric capacity of 120 W or less. In addition, long use of the electricappliance when the ready indicator is not il-
luminated may run down the auxiliary bat- tery.Accessory socket*CAUT,ONz Be sure to use a “plug-in” type accessory op-
erating at 12 V and at 120 W or less.
When using the two sockets at the same time, make sure that the electrical accesso-
ries are 12 V accessories and that the total power consumption does not exceed 120 W.
z Long use of the electric appliance when the
ready indicator is not illuminated may run
down the auxiliary battery.
z When the accessory socket is not in use, be
sure to close the lid or install the cap, be-
cause the socket might become clogged by foreign material and be short-circuited.
To use a plug-in type accessory, open the lid
or remove the cap, and insert the plug in the accessory socket.
Cigarette lighter*
8-752**(20(1For pleasant driving8

The accessory socket can be used while the
operation mode is in ON or ACC.USB port (for charging)*
The USB port (for charging) can be used as a
power source of the USB appliances when
the ignition switch or the operation mode is in ON or ACC.
There are two USB ports (for charging) loca-
ted on the back of the floor console box.
When using the USB port (for charging), open the lid and connect the USB connector
cable to it.CAUT,ONz When the USB port (for charging) is not in
use, be sure to close the lid, because theUSB port (for charging) might be short-
circuited by clogging foreign materials and
the connected devices and the USB port (for
charging) might be damaged.
z Insert the USB connector cable in the USB
port (for charging) firmly.
If the USB connector cable does not insert in
it firmly, it may become extremely hot and the fuses may blow.CAUT,ONz Be sure that the power consumption does not
exceed 10.5 W {The peak outlet current or
voltage of the USB port (for charging) is DC 5 V-2.1 A`.
The connected devices or the USB port (for
charging) may be damaged.
z Do not use the reversible USB connector ca-
ble on the USB connector board that is loca-ted in the centre.
The USB port (for charging) might be dam-
aged.
z Long use of the electric appliance without
running the engine may run down the bat- tery.NOTEz The USB ports (for charging) can be used
only as a power source. They are not con-
nected to the audio devices of the vehicles.
z Do not charge many mobile devices together
by using a multi-plug adapter of the USB
port (for charging).
z If water or spillt beverages has splashed on
the USB ports (for charging), stop using it and have the vehicle checked by a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
USB port (for charging)*
8-762**(20(1For pleasant driving8Instrument panelC RearB