2020 MITSUBISHI OUTLANDER PHEV Owner's Manual (in English)

reset refrigerant type compression ratio dimensions battery capacity remove seats

Page 169 of 594

MITSUBISHI OUTLANDER PHEV 2020 Owners Manual (in English) �C�A�U�T�,�O�N�z�F�o�r� �s�a�f�e�t�y�,� �s�t�o�p� �t�h�e� �v�e�h�i�c�l�e� �b�e�f�o�r�e� �o�p�e�r�a�t�i�n�g�.
�W�h�i�l�e� �d�r�i�v�i�n�g�,� �e�v�e�n� �i�f� �y�o�u� �o�p�e�r�a�t�e� �t�h�e� �m�u�l

CAUT,ONzFor safety, stop the vehicle before operating.
While driving, even if you operate the multi information display switch, the function set- ting screen is not displayed.
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to switch from the setting mode screen
to the menu screen.
NOTEz To return the menu screen to the function
setting screen, press and hold the multi in-formation display switch for about 2 seconds or more.
z If no operations are made within about 30
seconds of the menu screen being displayed, the display returns to the function settingscreen.
4. Select the item to change on the menu
screen and change to the desired setting. Refer to the following items for further
details on the operation methods.

Refer to “Changing the reset mode for
average fuel consumption” on page
6-17.
Refer to “Changing the fuel consump- tion display unit” on page 6-18.
Refer to “Changing the temperature
unit” on page 6-19.
Refer to “Changing the display lan- guage” on page 6-19.
Refer to “Changing the language cooper-
ative control” on page 6-20.
Refer to “Speed Limit Display function
setting” on page 7-91.
Refer to “Operation sound setting” on page 6-20.
Refer to “Changing the time until
“REST REMINDER” is displayed” on page 6-21.
Refer to “Changing the turn-signal
sound” on page 6-21.
Refer to “Reset of low tyre pressure warning threshold” on page 7-95.
Refer to “Tyre ID set change” on page
7-96.
Refer to “Reset of EV/Total cruising
range” on page 6-21
Refer to “Returning to the factory set- tings” on page 6-21.NOTEz If the auxiliary battery is disconnected, these
function settings are reset from memory and
return automatically to the factory settings (except the low tyre pressure warning threshold, tyre ID set and Speed Limit Dis-
play function).Changing the reset mode for
average fuel consumption
The mode conditions for the average fuel consumption display can be switched be- tween “Auto reset” and “Manual reset”. 1. Press and hold the multi information dis-
play switch for about 2 seconds or moreto switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
Multi information display
6-172**(20(1Instruments and controls6

Page 170 of 594

MITSUBISHI OUTLANDER PHEV 2020 Owners Manual (in English) �2�.�L�i�g�h�t�l�y� �p�r�e�s�s� �t�h�e� �m�u�l�t�i� �i�n�f�o�r�m�a�t�i�o�n� �d�i�s�-
�p�l�a�y� �s�w�i�t�c�h� �t�o� �s�e�l�e�c�t� �“�A�V�G� �(�a�v�e�r�a�g�e� �f�u�e�l
�c�o�n�s�u�m�p�t�i�o�n�)��

2.Lightly press the multi information dis-
play switch to select “AVG (average fuel
consumption)”.
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to switch from A/1 (Auto reset mode) to M/2/P (Manual reset mode), or fromM/2/P to A/1.
The setting is changed to the selected
mode condition.
Manual reset mode
z When the average fuel consumption is
being displayed, if you hold down the multi-information meter switch, the
average fuel consumption displayed at that time is reset.
z When the operation mode is changed
from ACC or OFF to ON, the mode set- ting is automatically switched from man-
ual to auto.
Switching to auto occurs automatically.
If switching to manual mode is done, however, the data from the last reset isdisplayed.
Auto reset mode
z When the average fuel consumption is
being displayed, if you hold down the multi-information meter switch, the
average fuel consumption displayed at that time is reset.
z When the operation mode is in ACC or
OFF for about 4 hours or longer, the average fuel consumption display is au-
tomatically reset.
NOTEz The average fuel consumption display can
be reset separately for the auto reset mode and for the manual reset mode.
z The memory of the auto reset mode or man-
ual reset mode for the average fuel con- sumption display is erased if the auxiliarybattery is disconnected.Changing the fuel consumption
display unit
The display unit for fuel consumption can be
switched. The distance and amount units are also switched to match the selected fuel con- sumption unit. 1. Press and hold the multi information dis-
play switch for about 2 seconds or more to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select “AVG UNIT (fuel
consumption display setting)”.
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to display “AVG UNIT”.
4. Lightly press the multi information dis-
play switch to select the units.
Multi information display
6-182**(20(1Instruments and controls6

Page 171 of 594

MITSUBISHI OUTLANDER PHEV 2020 Owners Manual (in English) �5�.�P�r�e�s�s� �a�n�d� �h�o�l�d� �t�h�e� �m�u�l�t�i� �i�n�f�o�r�m�a�t�i�o�n� �d�i�s�-
�p�l�a�y� �s�w�i�t�c�h� �f�o�r� �a�b�o�u�t� �2� �s�e�c�o�n�d�s� �o�r� �m�o�r�e �t�o� �c�h�a�n�g�e� �t�h�e�

Page 172 of 594

MITSUBISHI OUTLANDER PHEV 2020 Owners Manual (in English) �N�O�T�E�z�I�f� �“�-�-�-�”� �i�s� �s�e�l�e�c�t�e�d� �i�n� �t�h�e� �l�a�n�g�u�a�g�e� �s�e�t�t�i�n�g�,� �a
�w�a�r�n�i�n�g� �m�e�s�s�a�g�e� �i�s� �n�o�t� �d�i�s�p�l�a�y�e�d� �w�h�e�n�t�h

Page 173 of 594

MITSUBISHI OUTLANDER PHEV 2020 Owners Manual (in English) �C�h�a�n�g�i�n�g� �t�h�e� �t�i�m�e� �u�n�t�i�l� �“�R�E�S�T�R�E�M�I�N�D�E�R�”� �i�s� �d�i�s�p�l�a�y�e�d
�T�h�e� �t�i�m�e� �u�n�t�i�l� �t�h�e� �d�i�s�p�l�a�y� �a�p�p�e�a�r�s� �c�a�n� �b�e �c�

Changing the time until “RESTREMINDER” is displayed
The time until the display appears can be changed. 1. Press and hold the multi information dis-
play switch for about 2 seconds or more to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select “ALARM” (rest time setting).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to display “ALARM”.
4. Lightly press the multi information dis-
play switch to select the time until thedisplay.
5. Press and hold the multi information dis-
play switch for about 2 seconds or more, the setting is changed to the selected
time.
NOTEz The drive time is reset when the operation
mode of the power switch is put in OFF.Changing the turn-signal sound
It is possible to change the turn-signal sound.
1. Press and hold the multi information dis-
play switch for about 2 seconds or moreto switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select
(changing the
turn-signal sound).
3. Press and hold the multi information dis-
play switch for about 2 seconds or moreto switch from 1 (turn-signal sound 1) to
2 (turn-signal sound 2), or from 2 to 1.
The setting changes to the selected turn-
signal sound.
Reset of EV/Total cruising
range
The learned value for EV cruising range re-
sets to the initialized value. 1. Press and hold the multi information dis-
play switch for about 2 seconds or more to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select “
RESET” (Reset of EV cruising range).
3. When you press and hold the multi in-
formation display switch for about 3 sec- onds or more, the buzzer sounds and thelearned value resets to the default values.Returning to the factory set-
tings
Many of the function settings can be returned to their factory settings. 1. Press and hold the multi information dis-
play switch for about 2 seconds or moreto switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select “
RESET” (returning to the factory set-
tings).
3. When you press and hold the multi in-
formation display switch for about 5 sec- onds or more, the buzzer sounds and allof the function settings are returned to
the factory settings.
NOTEz The factory settings are as follows.

Page 174 of 594

MITSUBISHI OUTLANDER PHEV 2020 Owners Manual (in English) �N�O�T�E�

Page 175 of 594

MITSUBISHI OUTLANDER PHEV 2020 Owners Manual (in English) �I�n�d�i�c�a�t�i�o�n� �l�a�m�p�,� �w�a�r�n�i�n�g� �l�a�m�p�,� �a�n�d� �i�n�f�o�r�m�a�t�i�o�n� �s�c�r�e�e�n� �d�i�s�p�l�a�y� �l�i�s�t
� �I�n�d�i�c�a�t�i�o�n� �a�n�d� �w�a�r�n�i�n�g� �l�a�m�p� �l�i�s�t�

Page 176 of 594

MITSUBISHI OUTLANDER PHEV 2020 Owners Manual (in English) �1�7�- �I�n�f�o�r�m�a�t�i�o�n� �s�c�r�e�e�n� �d�i�s�p�l�a�y� �l�i�s�t�o� �p�.� �6�-�2�4
�1�8�- �A�c�t�i�v�e� �S�t�a�b�i�l�i�t�y� �C�o�n�t�r�o�l� �(�A�S�C�)� �i�n�d�i�c�a�- �t�i�o�n� �l�a�m�p� �o� �p�

Load next 8 pages

Page: < prev 1-10 ... 137-144 145-152 153-160 161-168 169-176 177-184 185-192 193-200 201-208 ... 600 next >

handbrake cruise control ABS spark plugs stop start warning lights