2013 SSANGYONG TURISMO Service Manual

03-14
4) Various Seat Arrangement
▶ Front seat & rear 1st seat : Semi full flat
▶ Rear 1st & 2nd seat full flat
Front seat : Move to the far front
Back semi full flat
Rear 1st seat : Move to the far end
Rear 2nd seat: Move to the far end
Rear 3rd seat : Fixed ·
·
·
·
Front seat : Move 36 mm from the
far end to the front
Rear 1st seat : Move to the far
front Remove head
rest Back full flat
Rear 2nd seat: Move to the far
end Back semi full
flat
Rear 3rd seat : Fixed ·
·
·
·

03-157410-01
▶ 8 passengers with loading
Front seat : Move 36 mm from the
far end to the front
Rear 1st seat : Middle
Rear 2nd seat: Middle
Rear 3rd seat : Double folding ·
·
·
·
▶ 5 passengers with loading
Front seat : Move 36 mm from the far
end to the front
Rear 1st seat : Move to the far end
Rear 2nd seat: Middle
Rear 3rd seat : Double folding ·
·
·
·

03-16
▶ 2 passengers with loading
Front seat : Move to the far end
Rear 1st seat : Middle / Back folding
Rear 2nd seat: Middle / Back folding
Rear 3rd seat : Fix/ Back folding ·
·
·
·

03-177410-01
5) Sliding-Moving Amount
Item Sliding distance
Front seats (A) 228 mm
Rear 1st row seats (B) 380 mm
Rear 2nd row seats (C) 340 mm
Total length of rear seat rail 1,610 mm

03-18
Headrest Height Adjustment
To adjust the height of the headrest, raise
the headrest without operating the
headrest support sleeve (A) and lower it
while pressing the headrest support
sleeve.
(However, raise the headrest while
pressing the headrest support sleeve (A)
in order to remove it.)
4. FRONT SEAT
1) To Adjust Front Seat
While the driver seat is provided as two models: a power seat and a manual seat, the manual seat is
only used for front passenger seat.
To adjust headrest ▶
To adjust headrest tilting
Move the headrest to the arrow direction
to adjust the angle.

03-197410-01
Power Seat
To adjust seat slide
Moving the slide switch forward and rearward
activates the slide motor to move the seat
forward and rearward.
To adjust seat back angle
When moving the upper part of the recline
switch forward/backward, the seatback angle is
adjusted as the recline motor rotates the rail.Manual Seat
To adjust seat slide
To move the seat forward or backward, pull and
hold the seat slide lever up and move the seat.
To adjust seat back angle
To fold the seatback, pull the seatback lock
release lever to release the lock. Then, lean
back to the desired angle and release the lever.
To adjust seatback ▶

03-20
Power Seat
To adjust seat cushion angle
When moving the front and rear parts of the
slide switch upwards or downwards, the front
and rear up/down motors rotate the rails to
move the front and rear side of the cushion
up/down.
To adjust seat height
When moving the slide switch up/down,
the front rear up/down motor rotates the rail to
move the whole seat cushion up/down.Manual Seat
To adjust seat cushion angle and
height
Turn the adjusting knob on the side of the seat
clockwise or anticlockwise to adjust the height
or angle of the front side or rear side of the
cushion.
To adjust driver seat lumbar support
When you raise and lower the adjusting lever
on the power and manual seats, the lumbar
support goes in and out of the seat.
The lumbar support is only fitted to the vehicle without the seat air bag.

03-217410-01
Internal Configuration of Seat Cushion
2) Front Seat Mechanism (Based on Power Seat)
Internal Configuration of Seatback
Lumbar support
Recline motor
Seat cushion rear
up/down motor
Seat cushion rear
up/down railSlide motor
The descriptions in this chapter are based on the driver’s seat and rear 1st seat.
(1) Components
Slide rail
Seat cushion front
up/down rail
Seat cushion front
up/down motor