Page 241 of 622

TOUCH SCREEN
220Average Speed
The Average Speed is displayed. The average vehicle
speed is calculated and displayed based on the total
driving
distance and the total driving time after the engine
is started.
The displayed value is updated every 10 seconds.
To calculate from the beginning, touch the “Reset” switch.
Distance
The distance after engine starting is displayed.
When refueling, be sure to stop your vehicle and turn the
engine switch off.
Hands free system
Hands free system allows you to make or receive a call
without taking your hands off the steering wheel by
connecting your cellular phone.
This system supports the Bluetooth. Bluetooth is a wireless
data system by which you can call without your cellular phone
connecting with a cable or placing on a cradle.
If your cellular phone does not support the Bluetooth, this
system can not function.
CAUTION
While you are driving, do not use a cellular phone or
connect the Bluetooth phone.
NOTICE
Do not leave your cellular phone in the vehicle. The
temperature indoor may be high and damage the phone.
Page 242 of 622
TOUCH SCREEN
221
INFORMATION
In the following conditions, the system may not
function.
The cellular phone is turned off.
The current position is outside the communication
area.
The cellular phone is not connected.
The cellular phone has a low battery.
G18047
By pushing the telephone button above, you can receive
a call or hang up without taking your hands off the
steering wheel.
Page 243 of 622
TOUCH SCREEN
222
G18005
You can use the microphone above when talking on the
phone.
The party’s voice outputs from the driver’s speaker. When the
received calls or received voice outputs, the audio from the
audio system or voice guidance from the Navigation system
will be muted.
INFORMATION
Talk alternately with your party on the phone. If you
talk at the same time, the voice may not reach each
other. (It is not a malfunction.)
Keep the volume of receiving voice down. Otherwise,
echo is coming up. When you talk on the phone,
speak clearly towards the microphone.
In the following situations, your voice may not reach
the party.
Driving on unpaved road. (Making a traffic noise.)
Driving at the high speed.
The window is open.
Turning the air conditioning vents towards the
microphone.
The sound of the air conditioning fan is loud.
Page 244 of 622
TOUCH SCREEN
223
G18006
1Indicates a condition of Bluetooth connection.
“Blue” indicates excellent condition of Bluetooth connection.
“Yellow” indicates the condition easy to disconnect the
Bluetooth, causing a deterioration in voice.
Not displayed: no connection to the Bluetooth.
2 Indicates the receiving area.
“Rm” is displayed when receiving in Roaming area.
“Hm” is displayed when receiving in Home area.
3
Indicates the level of reception.
Too bad Excellent
The level of reception does not always correspond with the one
of your cellular phone.
4 “A” is displayed when calling in analogue.
“D” is displayed when calling in digital.
Nothing is displayed when the system can get no information
from your cellular phone.
INFORMATION
This system supports the following service.
HFP (Hands Free Profile) Ver. 1.0
OPP (Object Push Profile) Ver. 1.1
If your cellular phone does not support HFP, you cannot
enter the Bluetooth phone, and take OPP service indi-
vidually.
Page 245 of 622

TOUCH SCREEN
224An antenna for the Bluetooth connection is built in the
display. The indication of the Bluetooth connection may
turn yellow and the system may not function when you
use the Bluetooth phone in the following conditions and
places.
Your cellular phone is hiding behind the display (behind the
seat or in the glove box and console box).
Your cellular phone touches (or is covered with) metal
materials.
Leave the Bluetooth phone on the place where “Blue”
indication is displayed.
BLUETOOTH is a trademark owned by Bluetooth SIG. Inc.
FCC ID: HYQBTA01A
IC ID: 1551A BTA01A MADE IN JAPAN
This device complies with Part 15 of the FCC Rules
and RSS−210. Operation is subject to the following
two conditions: (1) This device may not cause harm-
ful interference, and (2) This device must accept
any interference received, including interference
that may cause undesired operation.
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
Page 246 of 622