2008 TOYOTA TUNDRA Owners Manual

367
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
If “Confirm” is said, then input a voice
tag.
“Push the talk switch and say a name.”
is heard.
1. Push the talk switch and say the name of the dial number that you want to
register.
“XXXX Push the talk switch and say
confirm. Otherwise, say go back.” is
heard.
2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Stored. To register this as a speed dial
entry, push the talk switch and say set
speed dial. Otherwise, say confirm.” is
heard and “Stored” is displayed.
3. Select one of the following:
Confirm
Speed Dial Confirm
Push the talk switch and say “Confirm”, or
turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the knob.
“Returning to the phone book.” is heard.
Speed Dial
1. Push the talk switch and say “Set speed dial”, or turn the
“AUDIO/CONTROL” knob until “Speed
Dial” is displayed and push the knob.
“Set speed dial. Push the preset button to
assign to XXXX” is heard. 2. Push the desired preset button.
“Preset... is now assi gned. Returning to
the phone book.” is heard.
The system may not function in the follow-
ing cases:
If the phone book is full.
If the dial number has more than 24
digits. (b) By Phone
1. Push the talk switch and say “By phone”, or turn the “AUDIO/CONTROL”
knob until “By Phone” is displayed and
push the knob.
“Phone entry. Prepare to send the
information from the phone. When ready,
push the talk switch and say confirm.” is
heard. 2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Send the information at this time.” is
heard.
After the system has received the name
and phone number, “Push the talk switch
and say confirm. To select an alternate
number, say next or previous. Otherwise,
say go back.” is heard and “XXX (name)”
and “XXX (number)” is displayed. 3. Follow voice guidance instructions, push the talk switch and say “Confirm”,
or turn the “AUDIO/CONTROL” knob
until the dial number that you want to
register is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 366.

368
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
(c) Call History
1. Push the talk switch and say “Call history”, or turn the “AUDIO/CONTROL”
knob until “Call history” is displayed
and push the knob.
“Call history. Push the talk switch and say
incoming or outgoing.” is heard and “Call
History” is displayed. 2. Select one of the following:
Incoming
Outgoing
Incoming
1. Push the talk switch and say “Incoming”, or turn the
“AUDIO/CONTROL” knob until
“Incoming” is displayed and push the
knob.
“Most recent incoming call was XXXX” is
heard and the incoming number is dis-
played.
“Push the talk switch and say confirm.
Otherwise, say previous, or go back.” is
heard. 2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
the dial number that you want to regis-
ter is displayed and push the knob.
Next, input a voice tag.
For further details, see page 366. Outgoing
1. Push the talk switch and say “Outgoing”, or turn the
“AUDIO/CONTROL” knob until
“Outgoing” is displayed and push the
knob.
“Most recent outgoing call was XXXX” is
heard and the outgoing number is dis-
played.
“Push the talk switch and say confirm.
Otherwise, say previous, or go back.” is
heard. 2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
the dial number that you want to regis-
ter is displayed and push the knob.
Next, input a voice tag.
For further details, see 366. (d) Manual Input
1. Turn the “AUDIO/CONTROL” knob until “Manual Input” is displayed and push
the knob.
2. Turn the “AUDIO/CONTROL” knob to select a number. Push the
“AUDIO/CONTROL” knob to set.
3. When the number is set, push the “AUDIO/CONTROL” knob.
Next, input a voice tag.
For further details, see page 366.
INFORMATION
 The system can recognize single
digits from zero to nine # (pound),
∗ (star), and + (plus). Numbers that
are ten or greater are not recog-
nized.
 To speed up input, it is a good idea
to group all digits into a continuous
string. However, you can enter each
digit individually or group digits to-
gether in preferred string lengths.
The display corresponding to each op-
eration appears on the screen as fol-
lows:

369
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
Input operation—
You say: “Nine, nine, five”
Voice output: “995 to store push the
talk switch and say confirm.
Otherwise, continue adding numbers,
or say go back, or delete.”
Display: “995”
You say: “Seven, three, four”
Voice output: “734 to store push the
talk switch and say confirm. Other-
wise, continue adding numbers, or
say go back, or delete.”
Display: “995734”
Repeat the above procedure until the
entire number that you want to regis-
ter is input.
Go back operation—
You say: “Go back”
Voice output: “Go back. The last
numbers said have been removed.
Push the talk switch and say the
number.”Display: “995”
Repeating the above operation deletes
the last digits in reverse order of in-
put.
Delete operation—
You say: “Delete”
Voice output: “Deleted. Push the talk
switch and say the number.”
Display: “Delete”
The display will return to the initial
screen that allows a number to be
input.To list names
The voice tags can be edited during the
name playback.
1. Push the talk switch and say “List names”, or turn the “AUDIO/CONTROL”
knob until “List Names” is displayed
and push the knob.
“List names. To select a name, push the
talk switch during the name playback.” is
heard.
2. Follow voice guidance instructions.
“XXXX selected.” is heard and “Selected”
is displayed.
If you push the off −hook switch during the
name playback, you can dial the number
of the selected name.

370
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
Editing the voice tags
The following can be performed:
Dial
Change Name
Delete Entry
Speed Dial
“Push the talk switch and say dial, change
name, delete entry, or set speed dial.” is
heard and “Selected” is displayed.
Dial
Push the talk switch and say “Dial”, or
turn the “AUDIO/CONTROL” knob until
“Dial” is displayed and push the knob.
Change Name
Push the talk switch and say “Change
name”, or turn the “AUDIO/CONTROL”
knob until “Change Name” is displayed
and push the knob.
For further details, see page 371. Delete Entry
Push the talk switch and say “Delete
entry”, or turn the “AUDIO/CONTROL”
knob until “Delete Entry” is displayed and
push the knob.
For further details, see page 370.
Speed dial
Push the talk switch and say “Set speed
dial”, or turn the “AUDIO/CONTROL” knob
until “Speed Dial” is displayed and push
the knob.
For further details, see page 372.
To delete entry
1. Push the talk switch and say “Delete entry”, or turn the “AUDIO/CONTROL”
knob until “Delete Entry” is displayed
and push the knob.
“Delete entry. Push the talk switch and
say the name to delete.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
the name that you want to delete is
displayed and push the knob.
When using a voice command:
“XXXX Push the talk switch and say
confirm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
Follow voice guidance instructions, or turn
the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push knob.
“Deleted. Returning to the phone book.” is
heard and “Deleted” is displayed.
When using the knob:
“Deleted. Returning to the phone book.” is
heard and “Deleted” is displayed.
The system may not function is the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.

371
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
To delete speed dial
1. Push the talk switch and say “Delete speed dial”, or turn the
“AUDIO/CONTROL” knob until “Del Spd
Dial” is displayed and push the knob.
“Delete speed dial. Push the preset button
to delete from speed dial.” is heard. 2. Select the preset button that you want to delete.
“To delete preset... push the talk switch
and say confirm. Otherwise, say go back.”
is heard. 3. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard and “Deleted” is dis-
played.
“Returning to the phone book.” is heard
The system may not function in the follow-
ing cases:
If not speed dial has been registered.
If the preset button has not been as-
signed. To change name
1. Push the talk switch and say “Change name”, or turn the “AUDIO/CONTROL”
knob until “Change Name” is displayed
and push the knob.
“Change name Push the talk switch and
say the name to change” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
the dial number that you want to
change is displayed and push the
knob. When using a voice command:
“XXXX Push the talk switch and say
confirm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
1. Follow voice guidance instruction, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Push the talk switch and say a new
name.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Record Name” is displayed, push the
knob and say “XXX (new name)”.
“XXXX Push the talk switch and say
confirm. Otherwise, say go back.” is
heard. 3. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
book.” is heard and “Changed” is dis-
played.

372
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
When using the knob:
“Push the talk switch and say a new
name.” is heard.
1. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Record Name” is displayed, push the
knob and say “XXX (new name)”.
“XXXX Push the talk switch and say
confirm. Otherwise, say go back.” is
heard.
2. Follow voice guidance instruction, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
book.” is heard and “Changed” is dis-
played.
The system may not function is the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command. To set speed dial
1. Push the talk switch and say “Set Speed dial”, or turn the
“AUDIO/CONTROL” knob until “Speed
Dial” is displayed and push the knob.
“Set speed dial. Push the talk switch and
say a name.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
the dial number that you want to regis-
ter is displayed and push the knob. When using a voice command:
“XXXX To register this as a speed dial
entry, push the talk switch and say
confirm. Otherwise, push the talk switch
and say go back.” is heard and “XXXX” is
displayed.
1. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Push and hold the preset button to as-
sign to XXXX” is heard. 2. Push the desired preset button.
“preset... is now assi gned. Returning to
the phone book.” is heard.
When using the knob:
“Push the preset button to assign to
XXXX” is heard.
Push and hold the desired preset button.
“preset... is now assi gned. Returning to
the phone book.” is heard.
The system may not function in the follow-
ing cases:
If not name has been registered.
If the system does not recognize the
voice command.

373
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
INFORMATION
A shortcut to each of the following
functions is available. Push the off
hook switch and talk switch, and say
one of the following:
Phone book add entry
 Phone book change name
 Phone book delete entry
 Phone book delete speed dial
 Phone book list names
 Phone book set speed dial
The following can be performed:
Dial
Delete
Store
To enter the redial 1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Redial” is displayed and push the
knob.
“Redial. Most recent outgoing call was
XXXX” is heard and outgoing history is
displayed.
“Please push the off −hook switch to dial.
Otherwise, push the talk switch and say
dial, previous, go back, store, or delete.”
is heard. Dial
Turn the “AUDIO/CONTROL” knob until
the number that you want to dial is dis-
played and push the knob. After that, do
the one of the following:
Push the off
−hook switch.
Push the talk switch and say “dial”.
Turn the “AUDIO/CONTROL” knob until
“Dial” is displayed and push the knob.
Delete
1. Turn the “AUDIO/CONTROL” knob until the dial number that you want to delete
is displayed and push the knob.
2. Push the talk switch and say “Delete”, or turn the “AUDIO/CONTROL” knob
until “Delete” is displayed and push the
knob.
“Delete. Push the talk switch and say
confirm. Otherwise, say go back” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard.
—R ed ial

374
2008 TUNDRA from Apr. ’08 Prod. (OM 34477U)
Store
1. Turn the “AUDIO/CONTROL” knob until the dial number that you want to regis-
ter is displayed and push the knob.
2. Push the talk switch and say “Store”, or turn the “AUDIO/CONTROL” knob
until “Store” is displayed and push the
knob.
“Store. Push the talk switch and say
confirm. Otherwise, say go back.” is
heard. 3. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Confirm” is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 366.
The system may not function in the follow-
ing cases:
If there is no outgoing history.
If the phone book is locked.
INFORMATION
 Up to five outgoing calls can be
stored in the system.
 When five outgoing calls are stored
in memory, the oldest outgoing call
is deleted to make room in memory
for new calls.
 Only the latest outgoing call is
stored when the same telephone
number is dialed.
 A shortcut to “Redial” is available.
Push the offhook switch twice.
The following can be performed:
Dial
Delete
Store
To enter the callback 1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO/CONTROL” knob until
“Callback” is displayed and push the
knob.
“Callback. Most recent incoming call was
XXXX” is heard and incoming history is
displayed.
“Please push the off −hook switch to dial.
Otherwise, push the talk switch and say
dial, previous, go back, store, or delete.”
is heard.
—Callback