2004 DACIA SOLENZA Repair Manual

57
57 - 1
INSIDE ACCESSORIES
TIGHTENING MOMENTS(daNm)
Steering wheel attachment screw 4.4
Attachment screw steering wheel airbag 0.65
IMP ORTANT !
All interventions at the airbag system
must be pe rform e d onl y by qual i fi ed
s taff.
DISMOUNTING
IMP ORTANT !
Before dismounting the airbag, block
the UCE airbag by means of the CLIP
tester (see chapter 88 “ UCE ai rbag
blocking”). T he airbag indicato r from
the instrument panel is on. Disconnect the battery.
Dismount the two attachment screws of the
s teering wheel airbag on the steering wheel by
means of a T20 (TORX) head screwdriver.
upper part dashboard
lower part dashboard
Disconnect the steering wheel airbag connec-
tor.
Dashboard
vnx.su

57
57 - 2
INSIDE ACCESSORIES
DISMOUNTIN G
Dismount :
-s teering attachment screw ( 1) on the
steering column, by means of a screwdriver pro-
vided with TORX T50 head;
- steering wheel (2) not before bringing the
steering to the middle point (wheels are in a di-
rect line); - half-cases (3) and (4) connected be-
tween them by three screws (5) to the steering
column.
In order to dismount the under steering wheel
control from the upper shaft of the steering
w heel, loosen the screw (6) and extract the
under steering wheel control (7).
5 1
2
4
3
5
Disconnect the connectors of :
- lights, windscreen wiper;
- anti-theft mechanism;
- rotating contact.
AT T E N T I ON !
It is forbidden the handling of the pyro-
technic system near heating sources or open
fire, because there is the risk of undesirable
s tarting of the system.
IMP ORTANT !
Anytime when dismounting the steering
wheel, it is necessary to dismount the airbag
connector (1). The airbag is provided wi th
a connector who is short-circuited aft er dis-
connecting the wiring connector, avoiding
in this way all undesirable starting.
AT T E N T I ON !
It is forbidden the change of the rota-
tion c ontact position after di smounting
the under-steering wheel control assem-
bly, because there is the risk of i ts dam-
aging.
The under steering wheel control it is pro-
vided with a pre -cut self-a dhe sive tape
stacked on the rotating contact and on the
under steering wheel control body that is not
allowing the undesirable rotation of the rotat-
ing contact until its mounting on the attach-
ment cone of the steering column. In case the position of the rotating contact
is changed, then this one, is to be rotated
clockwise 2.5 complete rotations (or until it
gets blocked), then is to be rotated a nti-
clockwise 2.5 complete rotations.
7
6
Dashboard
vnx.su

57
57 - 3
INSIDE ACCESSORIES
Dismo unt :
-t wo side attachment screws (8) of the
upper part dashboard by means of a wrench T
20(“L” shape);
-screws (9) attaching the upper part
dashboard with the l ower part on the driving
post cross member, by means of a screwdriver
with T20 head. Detach from clips placed in points (10) the
upper part dashboard. Sw ing over the windscreen the upper part
dashboard and de tach from c lips poi nts (11)
of the windscreen lower cross beam. Detach from clips the radio from i ts sup-
port.
Disconnect the connectors and the ra dio
antenna (for the vehicle provided with radio-
cassettes player). Disconnect the central l ocking connector
(for the vehicle provided with central locking).
Take out the upper part dashboard from the
cockpit.
REMARK :
Dismounting of the upper part dash-
board, does not imply steering wheel dis-
mounting.
Disconn ect the anti-star ting bushing connec-
tor.
Detach from clips the anti-starting bushing
(12).
8
8
10
9
11
12
13
13 Dismount
the attachme nt screws (13) of the
instrument panel and disconnect the four con-
nectors.
Dashboard
vnx.su

57
57 - 4
INSIDE ACCESSORIES
19 20
17 16
15
18
Remove the access cover of the fuse box.
Di
smount the three a ttachment screws (14)
of the fuse box.
21
14
Remove the access cover to the fuse box.
Swing over the little caps from the dashboard
lower part and dismount the attachment screws
(15) on the driving post cross member.
Dismou nt :
- attachment scre ws (16) of the climate
maintenance p anel on the lower part dashboard;
- attachment screw (17) of the lower part
dashboard on the vent-AC distributor (RACV);
- attachment screws (18) of the lower part
dashboard on the driving post cross member;
-upper attachment screws (19) of the
lower part dashboard on the driving post cross
member.
Extract :- headlamps adjustment knob;
-cigarette lighter.
Detach from clips the connectors: - hazard;
-r
ear window defrosting.
Disconnect the connectors:
- cigarette lighter;
-r ear window defrosting.
Di smount the attachment nut (21) of the
headlamps adjustment control.
Disconnect the connectors:
- hazard;
- climate maintenance control.
D etach from clips the l eft a nd right side
aeration ducts.
Take out t he dashboard from cockpit.
Dashboard
vnx.su

57
57 - 5
INSIDE ACCESSORIES
REMOU NT I NG
Perform the dismounting operations in the reverse order, taking into consideration the follow-
ing recommendations:
-ensure that steering is at middle point (wheels are in a direct line);
- mounting of the lower part dashboard is to be performed by guiding it on a centering part
placed on the driving post cross beam; -steering wheel must freely enter in grooves;
- check the operation of the dashboard instruments and switches.
AT T E N T I O N :
After each steering wheel dismounting, its attachment screw is to be replaced, ob-
s erving the required tightening moment of 4.4 daNm.
Dashboard
vnx.su

57
57 - 6
INSIDE ACCESSORIES
Dashboard
Airbag
I mportant!
Before reconnecting the driver’s airbag connector, it is necessary to apply a checking
procedure of the system:
- Check if ai rbag indicator from the instrument panel is on, when the contact is set
on.
- Connect the igniter to the airbag connector (to the wiring) and check if the airbag
indicator is off. - Set the contact off, connect the airbag connector instead of the inert igniter and
attach the airbag on the steering wheel (requiret tightening moment is 0.65 daNm). After remounting, perform the system checking by means of the CLIP tester.
If everything is correct, unblock the UCE airbag (see chapter 88 “Unblocking UCE
airbag”). If is not correct, see chapter “Diagnostic”.
- Check if t he airbag i ndicator from the instrument panel is on for 3 seconds from
setting the cont act on, t hen it is off and i s remaini ng off.
AT T E N T I ON!
No n-observing of prevision prescriptions may cause un abnormal operation of the
sy stem, leading to the airbag undesirable starting.
vnx.su

57
57 - 7
INSIDE ACCESSORIES
DISMOUNTIN G
Upper attachment:
By means of a screwdriver, detach from clips the limiting wire for documents compartment
door’s opening from lower part dashboard.
Lower attachment:
P ush the plastic pin to the right side of driving post (in the arrow direction) and release the
documents compartment door from the lower part dashboard.
REMOU NT I NG
Perform the dismounting operations in the reverse or der.
Documents compartment door
vnx.su

57
57 - 8
INSIDE ACCESSORIES
Inside rear view mirror
DISMOUNTIN G
Dismounting of the interior rear view mirror ( 1) is to be performed by its depressing from the
support (2 ) in the direction of the arrow shown in the drawing.
The rear view m irror support ( 2) is stacked on windshield (3 ) .
REMOU NT I NG
Perform the dismounting operations in the reverse order.
vnx.su