2004 DACIA SOLENZA Repair Manual

66
66 - 5
GLASSES SEALING
34
1
2
Rear door glass run channel
DISMOUNTIN G
Dismount :
-r ear door panel (s ee chapter 72);
-r ead door deflective panel;
-r ear gl ass( s ee chapter 54 );
- guide run channel ( 1);
-r ear door glass run channel (2);
- glass guide (3);
-f ix glass together with gasket.
Release t he fix glass gasket (4).
REMOU NT I NG
Perform the dismounting operations in the reverse order.
vnx.su

71
CARRIAGE BODY INSIDE TRIMS
71 - 1
Carriage body inside trims
1 - Upper front pillar tri m
2 - Middle pillar t rim
3 - Rear quart er panel tri m
12 3
vnx.su

CARRIAGE BODY INSIDE TRIMS
71
71 - 2
DISMOUNTING
Dismount :
- dashboard upper part (see chapter 57 );
- front door sealing gasket in the contact area with the front pillar tri m;
- trim attachment screw (2) on the side fra me lining.
Upper front pillar trim
Detach from clips the upper front pillar trim (1) and release it.
REMOUNTING
Perform the dismounting operations in the reverse order.
The screw tightening moment is of 0,12 daNm.
1
2
vnx.su

71
CARRIAGE BODY INSIDE TRIMS
71 - 3
Middle pillar trim
DISMOUNTING
Move the front seat to e nable opera tor
access to the front pillar. Dismount:
- partially the front/re ar door ga skets
(in the contact are as with middle pi llar tri m);
- attachment screws (2) and (5) of the
front belt on the middle pillar at upper part,
consequently, at lower part;
- attachment screws (3) and (4) of the
middle pillar tri m on the side frame lining.
Release the middle pillar tri m (1).
REMOUNTING
Perform the dismounting ope rations in
the reverse order.
The tightening moment of the be lt attach-
ment screws is of 2,7 daNm, and the one of
the attachment screws of the middle pillar
trim is of 0,12 daNm.
vnx.su

CARRIAGE BODY INSIDE TRIMS
71
71 - 4
Rear quarter panel trim
DISMOUNTING
Dismount:
- rear quart er panel ornament;
- partially the rear door sealing gasket in the contact area with the rear quarter panel
trim; - rear table;
- table support ( see chapter 74);
- attachment screw (2) of the rear belt on the upper pa rt;
- attachment screws (4) and (5) of the rear quart er pa nel trim to t he side frame l ining.
Detach from clips the rear quarter pa nel trim (1).
REMOUNTING
Perform the dismounting operations in the reverse order.
The tightening moment of the belt attachment screw is of 2,7 daNm.
vnx.su

71
CARRIAGE BODY INSIDE TRIMS
71 - 5
1 – roof lining
2 - clips
DISMOUNTING
Detach from clips the ceiling lamp and disconnect it (
see chapter 81);
Di smount:
- turn handles (see chapter 58);
- sun visors (see chapter 58 );
- upper front pillar t rims;
- volumetric sensors (for vehicles provided with alarm);
- middle pillar tri ms;
- rear quart er panel trims.
Detach from clips the roof lining (1).
REMOUNTING
Perform the dismounting operations in the reverse order.
Roof lining
2
1
vnx.su

CARRIAGE BODY INSIDE TRIMS
71
71 - 6
Trunk carpet
DISMOUNTING
Unstuck the trunk c arpet from the self-adhesive tapes placed on the rear floor.
REMOUNTING
Pe rform the dismounting operations in the reverse order.
vnx.su

71
CARRIAGE BODY INSIDE TRIMS
71 - 7
DISMOUNTING
Dismount :
- dashboard (see chapter 57 );
- driving post cross beam (see chapter 42 );
- centra l console ( see chapter 58);
- distributor of t he air ventilation climate maintenance RACV ( see chapter 61);
- attaching scre w of the steering column support on the dri ving post cross-beam;
- pedals support ( see chapter 37);
- partially the floor carpet ( i n the noise absorbent coveri ng area).
Detach the noise absorbent (2 ) from the cowl panel clips (1).
Cowl panel noise absorbent
REMOUNTING
Perform in the reverse orde r the dismounting opera tions.
A maximum 3 daN clips attaching effort is necessary for the noise absorbent attach-
ment clips.
21
vnx.su