2022 TOYOTA GR86 Owners Manual (in English)

5
263
5
Interior features
Interior features
.5-1. Using the air conditioning
system
Automatic air conditioning sys-
tem ................................. 264
Seat heaters ..................... 269
5-2. Using the interior lights
Interior lights list................ 271
5-3. Using the storage features
List of storage features ..... 273
Trunk features................... 276
5-4. Using the other interior fea-
tures
Other interior features....... 277

2645-1. Using the air conditioning system
5-1.Using the air conditioning system
Left-hand side temperature setting display
Left-hand side temperature control switch
Climate control mode display
Fan speed control switch
Right-hand side temperature control switch
Right-hand side temperature setting display
“MAX A/C” switch
“SYNC” switch
Outside/recirculated air mode switch
“A/C” switch
Automatic air conditioning system
Air outlets are automatically selected and fan speed is automatically
adjusted according to the set temperature setting.
The illustrations below are for left-hand drive vehicles.
The button positions and shapes will differ for right-hand drive vehi-
cles.
Also, the display and button positions will differ depending on the
type of the system.
Air conditioning controls
A
C
D

265
5
5-1. Using the air conditioning system
Interior features
Airflow mode control switch
Rear window defogger and outside rear view mirror defoggers switch
“ON/OFF” switch
Windshield defogger switch
Automatic mode switch
■Adjusting the temperature set-
ting
To adjust the temperature setting,
turn the temperature control switch
clockwise (warm) or
counterclockwise (cool).
If “A/C” switch is not pressed, the sys-
tem will blow ambient temperature air
or heated air.
The air conditioning system switches
between individual and synchronized
modes each time “SYNC” switch is
pressed.
Synchronized modes (indicator on):
The left-hand side temperature control
switch can be used to adjust the tem-
perature for the driver’s and front pas-
senger’s side. At this time, operate the
right-hand side temperature control
switch to enter individual mode.
Individual modes (indicator off):
The temperature for the driver’s and
front passenger’s side can be adjusted
separately.
■Setting the fan speed
To adjust the fan speed, turn the
fan speed control switch clockwise
(increase) or counterclockwise
(decrease).
Pressing the “ON/OFF” switch to turns
off the fan.
■Change the airflow mode
Press the airflow mode control
switch.
The airflow mode changes as follows
each time the switch is pressed.
1 Upper body
2 Upper body and slightly to the
feet
3 Upper body and feet
4 Feet
5 Feet and the windshield defog-
ger operates
■Switching between outside air
and recirculated air modes
Press the outside/recirculated air
mode switch.
The mode switches between outside air
mode and recirculated air mode each
time the switch is operated.

2665-1. Using the air conditioning system
When recirculated air mode is selected,
the indicator illuminates on the out-
side/recirculated air mode switch.
■Set cooling and dehumidifica-
tion function
Press the “A/C” switch.
When the function is on, the indicator
illuminates on the “A/C” switch.
■Fast cooling function
Press the “MAX A/C” switch.
When the switch is turned on, the air
conditioning will turn on, the tempera-
ture will be set to LO, the fan speed will
be set to MAX, the air outlets will be set
to upper body, and the air mode will
change to recirculated air mode auto-
matically.
To turn off fast cooling function and
return the previous setting, press the
“MAX A/C” switch again.
■Suspend function
Press the “ON/OFF” switch.
While the air condi tioning system is
being used, when the “ON/OFF” switch
is pressed, the air conditioning system
will stop and the temperature setting
display, etc. will turn off.
If the “ON/OFF” switch is pushed and
turned on, the air conditioning system
will operate in the operating state it was
in when turned off. However, if the fast
cooling function was operating when
the air conditioning system was turned
off, it will operate in the operating state
it was in before the fast cooling function
was turned on.
■Defogging the windshield
Defoggers are used to defog the
windshield and front side windows.
Press the windshield defogger
switch.
Set the outside/recirculated air mode
switch to outside air mode if the recircu-
lated air mode is used. (It may switch
automatically.)
To defog the windshield and the side
windows quickly, turn the air flow and
temperature up.
To return to the previous mode, press
the windshield defogger switch again
when the windshield is defogged.
When the windshield defogger switch is
on, the indicator illuminates on the
windshield defogger switch.
■Defogging the rear window
and outside rear view mirrors
Defoggers are used to defog the
rear window, and to remove rain-
drops, dew and frost from the out-
side rear view mirrors.
Press the rear window and outside
rear view mirror defoggers switch.
The defoggers will automatically turn off
after approximately 15 minutes.
When the rear window and outside rear
view mirror defoggers switch is on, the
indicator illuminates on the rear window
and outside rear view mirror defoggers
switch.
■Fogging up of the windows
●The windows will easily fog up when
the humidity in the vehicle is high.
Turning “A/C” on will dehumidify the air from the outlets and defog the
windshield effectively.
●If you turn “A/C” off, the windows may
fog up more easily.
●The windows may fog up if the recir-

267
5
5-1. Using the air conditioning system
Interior features
culated air mode is used.
■When driving on dusty roads
Close all windows. If dust thrown up by the vehicle is still dr awn into the vehicle
after closing the windows, it is recom-
mended that the air intake mode be set to outside air mode and the fan speed to
any setting except off.
■Outside/recirculated air mode
●Setting to the recirculated air mode
temporarily is recommended in pre-
venting dirty air from entering the vehicle interior and helping to cool the
vehicle when the outside air tempera-
ture is high.
●Outside/recirculated air mode may
automatically switch depending on the temperature setting or the inside tem-
perature.
■When the outside temperature falls
to nearly 0°C (32°F)
The dehumidification function may not
operate even when “A/C” switch is
pressed.
■Ventilation and air conditioning odors
●To let fresh air in, set the air condition-ing system to the outside air mode.
●During use, various odors from inside and outside the vehicle may enter into
and accumulate in the air conditioning
system. This may then cause odor to be emitted from the vents.
●To reduce potential odors from occur-ring:
• It is recommended that the air condi-
tioning system be se t to outside air mode prior to turning the vehicle off.
• The start timing of the blower may be
delayed for a short period of time
immediately after the air conditioning system is started in automatic mode.
■Air conditioning filter
 P.314
■When continuous operation is set
During continuous operation, the defog-
ger stops operating for 2 minutes after
every 15 minutes of continual operation. Even during the 2 minutes that opera-
tion stops, the operating light remains
illuminated. The rear window defogger will continue to operate in this cycle until
it is turned off.
■Customization
Some functions can be customized. ( P.377)
1Press the automatic mode
switch.
2 Adjust the temperature setting.
3 To stop the operation, press the
“ON/OFF” switch.
If the fan speed setting or air flow
modes are operated, the automatic
WA R N I N G
■To prevent the windshield from
fogging up
Do not use the windshield defogger switch during cool air operation in
extremely humid weather. The differ-
ence between the temperature of the outside air and that of the windshield
can cause the outer surface of the
windshield to fog up, blocking your vision.
■When the outside rear view mir-ror defoggers are operating
Do not touch the outside rear view
mirror surfaces, as they can become very hot and burn you.
NOTICE
■To prevent battery discharge
Do not leave the air conditioning sys- tem on longer than necessary when
the engine is off.
Using automatic mode

2685-1. Using the air conditioning system
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
■Using automatic mode
Fan speed is adjusted automatically according to the temperature setting and
the ambient conditions.
Therefore, the fan may stop for a while until warm or cool air is ready to flow
immediately after the automatic mode
switch pressed.
■Location of air outlets
The air outlets and air volume
changes according to the selected
air flow mode.
■Adjusting the position of and
opening and closing the air
outlets
Center
1 Direct air flow to the left or right,
up or down
2 Turn the knob to open or close
the vent
Side
1 Direct air flow to the left or right,
up or down
2 Open the vent
3 Close the vent
Air outlet layout and opera-
tions

269
5
5-1. Using the air conditioning system
Interior features
*: If equipped
■Seat heaters
Press the switch to warm the seats.
The indicator light comes on when a
seat heater is turned on.
WA R N I N G
■To prevent the windshield defog-
ger from operating improperly
Do not place anything on the instru- ment panel which may cover the air
outlets. Otherwise, air flow may be
obstructed, preventing the windshield defoggers from defogging.
Seat heaters*
Warm up the seat upholstery.
WA R N I N G
■To prevent minor burn injuries
Care should be taken if anyone in the
following categories comes in contact with the seats when the heater is on:
●Babies, small children, the elderly, the sick and the physically chal-
lenged
●Persons with sensitive skin
●Persons who are fatigued
●Persons who have taken alcohol or
drugs that induce sleep (sleeping drugs, cold remedies, etc.)
NOTICE
■To prevent damage to the seat
heaters
Do not put heavy objects that have an
uneven surface on the seat and do
not stick sharp objects (needles, nails, etc.) into the seat.
■To prevent battery discharge
Do not use the functions when the
engine is off.
Operation instructions

2705-1. Using the air conditioning system
1Rapid heating
2 Normal heating
When not in use, put the switch in the
neutral position. The indicator will turn
off.
■The seat heaters can be used when
The engine switch is in ON.
■When not in use
Turn the seat heater off. The indicator light goes off.
WA R N I N G
■To prevent overheating and
minor burn injuries
Observe the following precautions when using the seat heaters.
●Do not cover the seat with a blanket or cushion when using the seat
heater.
●Do not use seat heater more than
necessary.