17
2
2-1. Basic information before operation
Basic function
User can move buttons to
another page by dragging them
to the corresponding end of the
screen if the number of buttons
allows for multiple pages.
3 Press the button to leave
the edit mode.
1 Select and hold the shortcut
icon to enter edit mode.
2 Drag the shortcut icon to “DRAG
HERE TO DELETE” area.
3 Press the button to leave
the edit mode.
When entering data, letters and
numbers can be entered via the
screen.
Select to move the cursor.
Input field
• The position of the cursor can be
moved by selecting the desired loca-
tion in the input field.
Select to clear the input field.
Select to erase one character.
Select to en ter the item.
Select to change keyboard
types.
Select to enter symbols.
Select to enter characters in
lower case or in upper case.
●The appearance of the keyboard may change or the input method may be
limited depending on the circum-
stances where the software keyboard is displayed.
●When the language has been
Deleting shortcut icons
Entering letters and
numbers/list screen
operation
Entering letters and num-
bers
A
B
C
D
E
F
G
H
182-1. Basic information before operation
changed, depending on the language,
in rare cases te xt may not be dis- played correctly.
The list screen can be scrolled by a
swipe gesture.
For details on the operation: P. 1 5
Select to skip to the next or pre-
vious page.
This indicates the displayed
screen’s position.
Faster scrolling is possible by
dragging the position indicator.
Some lists contain character
screen buttons which allow
users to jump directly to list
entries that begin with the same
letter as the character screen
button.
Every time the same character
screen button is selected, the
list starting with the subsequent
character is displayed.
The brightness of the screen can
be adjusted.
Refer to the “OWNER'S MANUAL”
for details.
List screen
A
B
C
Screen adjustment
Adjusting brightness
91
7
7-1. Voice command system operation
Voice command system
1 Press the talk switch.
After the voice recognition top
screen has been displayed,
speech guidance will commence.
2 Say the command.
When selecting “Help” or saying
“Help”, all commands supported
by the system are listed.
If a category name is selected,
the selected category command
list will be displayed.
To cancel voice recognition,
select , or press and hold the
talk switch.
●Turn the “VOLUME” knob, or use the
volume control switch on the steering
wheel to adjust the speech guidance volume.
Recognisable voice commands and
their actions are shown below.
Frequently used commands are
listed in the following tables.
For devices that are not installed
in the vehicle, the related com-
mands will not be displayed in
the screen. Also, according to
conditions, other commands may
not be displayed in the screen.
The functions available may vary
according to the system
installed.
If the system language is
changed on the general settings
screen, the language of the voice
recognition func tion will also
change.
Refer to the “OWNER'S MAN-
UAL” for details.
●The notations used in the commands
are as follows.
•< ○○○>: Numbers, titles, or names to be spoken
Voice recognition system
operation
Command list
Command list overview
