2022 TOYOTA GR86 battery

GR 86_EE
1
6
5
4
3
2
8
7
Pictorial indexSearch by illustration
For safety
and security
Make sure to read through them (Main topics: Child seat, theft deterrent system)
Vehicle status
information and
indicators
Reading driving-related information (Main topics: Meters, multi-information display)
Before drivingOpening and closing the doors and windows, adjustment before driving (Main topics: Keys, doors, seats, power windows)
DrivingOperations and advice which are necessary for driving (Main topics: Starting engine, refueling)
Interior featuresUsage of the interior features(Main topics: Air conditioner, storage features)
Maintenance
and care
Caring for your vehicle and maintenance procedures (Main topics: Interior and exterior, light bulbs)
When trouble
arises
What to do in case of malfunction and emergency (Main topics: Battery discharge, flat tire)
Ve h i c l e
specifications
Vehicle specifications, customizable features (Main topics: Fuel, oil, tire inflation pressure)
IndexSearch by symptom
Search alphabetically

4TABLE OF CONTENTS
Tire inflation pressure .........312
Wheels ................................ 313
Air conditioning filter ........... 314
Electronic key battery ......... 316
Checking and replacing fuses
.......................................... 319
Light bulbs .......................... 321
7-1. Essential information
Emergency flashers ............ 326
If your vehicle has to be stopped
in an emergency ............... 326
If the vehicle is submerged or
water on the road is rising
.......................................... 327
7-2. Steps to take in an emergency
If your vehicle needs to be towed
.......................................... 329
If you think something is wrong
.......................................... 334
Fuel pump shut off system
.......................................... 335
If a warning light turns on or a
warning buzzer sounds ..... 336
If a warning message is dis-
played ............................... 344
If you have a flat tire ........... 345
If the engine will not start .... 355
If you lose your keys ........... 356
If the fuel filler door cannot be
opened.............................. 357
If the electronic key does not
operate properly ............... 357
If the vehicle battery is dis-
charged............................. 359
If your vehicle overheats ..... 362
If the vehicle becomes stuck
.......................................... 364
8-1. Specifications
Maintenance data (fuel, oil level,
etc.)................................... 368
Fuel information .................. 376
8-2. Customization
Customizable features ........ 377
What to do if... (Troubleshooting)
.......................................... 386
Alphabetical Index .............. 389
7When trouble arises
8Vehicle specifications
Index

721-3. Emergency assistance
WA R N I N G
• During an Emergency Call, the sys-
tem makes repeated attempts to
connect to the PSAP. However, if it cannot connect to the PSAP due to
poor radio wave reception, the sys-
tem may not be able to connect to the cellular network and the call
may finish without connecting. The
red indicator light will blink for
approximately 5 seconds to indicate this disconnection.
●If the battery’s voltage decreases or there is a disconnection, the system
may not be able to connect to the
PSAP.
■When the Emergency Call sys-
tem is replaced with a new one
The Emergency Call system should
be registered. Contact any authorized
Toyota retailer or Toyota authorized repairer, or any reliable repairer.
■For your safety
●Please drive safely.
The function of this system is to
assist you in making the Emer- gency Call in case of accidents
such as traffic accidents or sudden
medical emergencies, and it does not protect the driver or passengers
in any way. Please drive safely and
fasten your seatbelts at all times for your safety.
●In case of an emergency, make lives the top priority.
●If you smell anything burning or other unusual smells, leave the
vehicle and evacuate to a safe area
immediately.
●If the airbag deploys when the sys-
tem is operating normally, the sys- tem makes an emergency call.
Even if the airbag has not deployed,
the system may also make an emergency call when the vehicle is
hit from behind.
●For safety, do not make the Emer- gency Call while driving.
Making calls during driving may
cause mishandling of the steering wheel, which may lead to unex-
pected accidents.
Stop the vehicle and confirm the safety of your surroundings before
making the Emergency Call.
●When changing fuses, please use
the specified fuses. Using other
fuses may cause ignition or smoke in the circuit and lead to a fire.
●Using the system while there is smoke or an unusual smell may
cause a fire. Stop using the system
immediately and consult any authorized Toyota retailer or Toyota
authorized repairer, or any reliable
repairer.
NOTICE
■To prevent damage
Do not pour any liquids onto the
“SOS” button panel, etc. and do not
impact it.
■If the “SOS” button panel,
speaker or microphone malfunc- tions during an Emergency Call
or manual maintenance check
It may not be possible to make Emer- gency Calls, confirm the system sta-
tus, or communicate with the
emergency operator. If any of the above equipment is damaged, please
consult any authorized Toyota retailer
or Toyota authorized repairer, or any reliable repairer.

821-4. Theft deterrent system
activated and deactivated as follows.
■System maintenance
The vehicle has a maintenance-free
type alarm system.
■Opening and closing the trunk
●If the alarm setting operations are per-
formed with the trunk left open, the
alarm will not be set. After closing the trunk, the alarm is set after 30 sec-
onds or more elapse.
●When the trunk is unlocked using the
entry function or wireless remote con-
trol while the alarm is set, the alarm goes into standby mode. After closing
the trunk, the alarm is set again after
30 seconds or more elapse.
■Triggering of the alarm
The alarm may be triggered in the fol- lowing situations:
(Stopping the alarm deactivates the
alarm system.)
●The doors are unlocked using the key
or the mechanical key.
●A person inside the vehicle opens a
door or the trunk, or unlocks the vehi- cle using an inside lock button.
●The battery is recharged or replaced when the vehicle is locked. ( P.361)
Alarm sta-
tusHorn
Multi-infor-
mation dis-
play
DeactivatedSounds
twice“AL OFF”
ActivatedSounds
once“AL ON”
NOTICE
■To ensure the system operates
correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be
guaranteed.

942-1. Instrument cluster
/ : Select menu icons
/ : Change displayed con-
tent, scroll up/down the screen
and move the cursor
Press: Enter
Press and hold: Reset/change
scale of the G-force display
Return to the previous screen
■Display items
Press or of the meter con-
trol switch and select . Then
press or to display the fol-
lowing items:
 Driving information (page 1)
 Driving information (page 2)
 Driving information (page 3)
 Driving information (page 4)
■Driving information (page 1)
Use the display as a reference.
Voltmeter
Displays the char ging voltage.
As voltage displayed may be different
from the actual battery voltage, use the
voltmeter as a guideline.
Engine oil temperature gauge
Displays the engine oil temperature.
■Driving information (page 2)
Use the display as a reference.
Current fuel consumption
Displays the current rate of fuel con-
sumption.
Average fuel consumption
Displays the average fuel consumption
since the function was reset.
Driving range
Displays the estimated maximum dis-
tance that can be driven with the quan-
tity of fuel remaining.
This distance is computed based on
Content of driving informa-
tion
A
C
A
A
C

982-1. Instrument cluster
Select to display the operational
status of the Adaptive Cruise Con-
trol system ( P.185, 201)
The settings of the following sys-
tems can be changed.
 LDW (Lane Departure Warning)
(if equipped)
 PCB (Pre-Collision Braking) (if
equipped)
 BSD/RCTA (if equipped)
 RAB (Reverse Automatic Brak-
ing system) (if equipped)
 (Sonar Audible Alarm) (if
equipped)
 SRH (Steering Responsive
Headlight) (if quipped)
■Meter display settings that can
be changed
 Units (if equipped)
Select to change the units of measure
displayed.
 Startup Scrn
Select to enable/disable the startup
screen when the engine switch is
turned to ON.
 GSI (if equipped)
Select to enable/disable the shift posi-
tion indicator and shift-up indicator.
 REV. (REV indicator)
• Select to enable/disable the rev indi-
cator.
• Select to enable/disable the sounding
of a buzzer when the REV indicator is
illuminated.
• Select to set the engine speed at
which the rev indicator (orange) will
begin to be displayed.
■Vehicle functions and settings
that can be changed
 P.377
■Suspension of the settings display
●Some settings cannot be changed while driving. When changing set-
tings, park the vehicle in a safe place.
●If a warning message is displayed,
operation of the settings display will
be suspended.
Driving support system
information display (if
equipped)
Driving support system set-
ting display
Settings display
WA R N I N G
■Cautions during setting up the display
As the engine needs to be running
during setting up the display, ensure that the vehicle is parked in a place
with adequate ventilation. In a closed
area such as a garage, exhaust gases including harmful carbon mon-
oxide (CO) may colle ct and enter the
vehicle. This may lead to death or a serious health hazard.
NOTICE
■While setting up the display
To prevent battery discharge, ensure that the engine is running while set-
ting up the display features.

1003-1. Key information
3-1.Key information
The following keys are provided
with the vehicle.
Electronic keys
• Operating the smart entry & start sys-
tem ( P.109)
• Operating the wireless remote control
function ( P.101)
Mechanical keys
Key number plate
■When riding in an aircraft
When bringing an electronic key onto an
aircraft, make sure you do not press any
buttons on the electronic key while inside the aircraft cabin. If you are carry-
ing an electronic key in your bag etc.,
ensure that the buttons are not likely to be pressed accidentally. Pressing a but-
ton may cause the electronic key to emit
radio waves that could interfere with the operation of the aircraft.
■Electronic key battery depletion
●The standard battery life is 1 to 2 years.
●If the battery becomes low, an alarm
will sound in the cabin and a message will be shown on the multi-information
display when the engine is stopped.
●To reduce key battery depletion when
the electronic key is to not be used for
long periods of time, set the electronic key to the battery-saving mode.
( P. 111 )
●As the electronic key always receives
radio waves, the battery will become
depleted even if the electronic key is not used. The following symptoms
indicate that the electronic key battery
may be depleted. Replace the battery when necessary. ( P.316)
• The smart entry & start system or the
wireless remote control does not oper- ate.
• The detection area becomes smaller.
• The LED indicator on the key surface does not turn on.
●To avoid serious deterioration, do not leave the electronic key within 1 m (3
ft.) of the following electrical appli-
ances that produce a magnetic field: •TVs
• Personal computers
• Cellular phones, cordless phones and battery chargers
• Recharging cellular phones or cord-
less phones • Table lamps
• Induction cookers
■Replacing the battery
 P. 3 1 6
■Confirmation of the registered key number
The number of keys already registered
to the vehicle can be confirmed. Ask any authorized Toyota retailer or Toyota
authorized repairer, or any reliable
repairer for details.
Keys
The keys
A
C
NOTICE
■To prevent key damage
●Do not drop the keys, subject them
to strong shocks or bend them.
●Do not expose the keys to high
temperatures for long periods of
time.

101
3
3-1. Key information
Before driving
The electronic keys are equipped
with the following wireless remote
control:
Locks the doors ( P.103)
Closes the windows* ( P.103)
Unlocks the doors ( P.103)
Opens the windows* ( P.103)
Opens the trunk ( P.108)
*: These settings must be customized
at any authorized Toyota retailer or
Toyota authorized repairer, or any
reliable repairer.
To take out the mechanical key,
push the release button and take
the key out.
The mechanical key can only be
inserted in one direction, as the key
only has grooves on one side. If the key
cannot be inserted in a lock cylinder,
turn it over and re-attempt to insert it.
After using the mechanical key, store it
in the electronic key. Carry the mechan-
ical key together with the electronic key.
If the electronic key battery is depleted
or the entry function does not operate
properly, you will need the mechanical
key. ( P.357)
NOTICE
●Do not get the keys wet or wash
them in an ultrasonic washer etc.
●Do not attach metallic or magnetic
materials to the keys or place the
keys close to such materials.
●Do not disassemble the keys.
●Do not attach a sticker or anything else to the surface of the electronic
key.
●Do not place the keys near objects
that produce magnetic fields, such
as TVs, audio systems and induc- tion cookers.
■Carrying the electronic key on your person
Carry the electronic key 10 cm (3.9
in.) or more away from electric appli- ances that are turned on. Radio
waves emitted from electric appli-
ances within 10 cm (3.9 in.) of the electronic key may interfere with the
key, causing the key to not function
properly.
■In case of a smart entry & start
system malfunction or other key-related problems
P. 3 5 7
■When an electronic key is lost
P. 3 5 6
Wireless remote control
Using the mechanical key
A
C
D