2022 TOYOTA GR86 Owners Manual (in English)

8
367
8
Vehicle specifications
Vehicle specifications
.8-1. Specifications
Maintenance data (fuel, oil
level, etc.) ....................... 368
Fuel information ................ 376
8-2. Customization
Customizable features ...... 377

3688-1. Specifications
8-1.Specifications
*: Unladen vehicle
■Vehicle identification number
The vehicle identification number
(VIN) is the legal identifier for your
vehicle. This is the primary identifi-
cation number for your Toyota. It is
used in registering the ownership of
your vehicle.
This number is stamped under the
right-hand front seat. This number is located on the top
left of the body panel.
Maintenance data (fuel, oil level, etc.)
Dimensions and weights
Overall length4265 mm (167.9 in.)
Overall width1775 mm (69.9 in.)
Overall height*1310 mm (51.6 in.)
Wheelbase2575 mm (101.4 in.)
TreadFront1520 mm (59.8 in.)
Rear1550 mm (61.0 in.)
Gross vehicle mass
Details are described on the tire
and loading information label.
( P.368)
Maximum permissible axle
capacity
Front876 kg (1931 lb.)
Rear943 kg (2079 lb.)
Vehicle identification

369
8
8-1. Specifications
Vehicle specifications
This number is also on the manu-
facturer’s label.
■Engine number
The engine number is stamped on
the engine block as shown.
Engine
ModelFA2 4
Ty p eHorizontally opposed, liquid cooled 4 cyl-
inder, 4-stroke gasoline
Bore and stroke94.0  86.0 mm (3.70  3.39 in.)
Displacement2387 cm3 (146 cu. in.)
Drive belt tensionAutomatic adjustment

3708-1. Specifications
*: If unleaded gasoline with a Research Octane Number of 98 is not available,
unleaded gasoline with a Research Octane Number of 95 may be used with no
detriment to engine durability or driveability.
■Oil capacity (Drain and refill [Reference*])
*: The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check
the oil level on the dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used
in your Toyota vehicle. Use Toyota
approved “Toyota Genuine Motor
Oil” or equivalent to satisfy the fol-
lowing grade and viscosity.
Oil grade:
0W-20, 5W-20 and 5W-30:
API grade SL “Energy-Conserving”,
SM “Energy-Conserving”, SN
“Resource-Conserving” or SN
PLUS “Resource-Conserving”; or
ILSAC GF-5 multigrade engine oil
Recommended viscosity (SAE):
SAE 0W-20 is filled in to your Toyota
vehicle at manufacturing, and the
best choice for good fuel economy
and good starting in cold weather.
If SAE 0W-20 is not available, SAE
5W-20 oil may be used. However, it
must be replaced with SAE 0W-20
Fuel
Fuel type
When you find these types of fuel label at
the gas station, use only the fuel with one
of the following labels.
EU area: Unleaded gasoline conforming
to European standard EN228 only
Except EU area: Unleaded gasoline only
Research Octane Number98 or higher*
Fuel tank capacity (Reference)50 L (13.2 gal., 11.0 Imp. gal.)
Lubrication system
With filter5.0 L (5.3 qt., 4.4 Imp. qt.)
Without filter4.8 L (5.1 qt., 4.2 Imp. qt.)

371
8
8-1. Specifications
Vehicle specifications
at the next oil change.
Temperature range anticipated
before next oil change
Preferred
Oil viscosity (0W-20 is explained
here as an example):
• The 0W in 0W-20 indicates the
characteristic of the oil which
allows cold startab ility. Oils with a
lower value before the W allow
for easier starting of the engine
in cold weather.
• The 20 in 0W-20 indicates the
viscosity characteristic of the oil
when the oil is at high tempera-
ture. An oil with a higher viscos-
ity (one with a higher value) may
be better suited if the vehicle is
operated at high speeds, or
under extreme load conditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should
use.
API Service Symbol
Top portion: “API SERVICE SN” means
the oil quality designation by American
Petroleum Institute (API).
Center portion: “SAE 0W-20” means
the SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and
environmental protection capabilities.
ILSAC Certification Mark
The International Lubricant Specifica-
tion Advisory Commi ttee (ILSAC) Certi-
fication Mark is displayed on the front of
the container.
A
A

3728-1. Specifications
Cooling system
Capacity
Vehicles with an automatic transmission
7.7 L (8.1 qt., 6.8 Imp. qt.)
Vehicles with a manual transmission
7.4 L (7.8 qt., 6.5 Imp. qt.)
Coolant type
Use either of the following.
 “TOYOTA Genuine 50/50 Pre-mixed Super Long Life
Coolant BLUE”
 Similar high-quality ethylene glycol-based non-sili-
cate, non-amine, non-nitrite, and non-borate coolant
with long-life hybrid organic acid technology
Do not use plain water alone.
Ignition system (spark plug)
Make
Gap
DENSO ZXE27HBR8
0.8 mm (0.031 in.)
NOTICE
■Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine.
Electrical system
Battery
Specific gravity reading at 20°C
(68°F):
1.250 1.290 Fully charged
1.160 1.200 Half charged
1.060 1.100 Discharged
Charging rates
Quick charge
Slow charge
15 A max.
5 A max.

373
8
8-1. Specifications
Vehicle specifications
*: Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil LX” at the
factory. Use Toyota approved “Toyota G enuine Differential Gear Oil LX” or an
equivalent of matching quality to satisfy the above specification. Please contact
any authorized Toyota dealer or repairer, or another duly qualified and equipped
professional for further details.
*: The fluid capacity is provided as a reference.
If replacement is necessary, contact any au thorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
Differential
Oil capacity (Reference)1.15 L (1.22 qt., 1.01 Imp. qt.)
Oil type and viscosity* Toyota Genuine Differential Gear Oil LX
 Other LSD gear oil that meets API GL-5 and
SAE 75W-85
NOTICE
■Differential gear oil type
Using a differential gear oil other than “Toyota Genuine Differential Gear Oil LX” may cause occurrences of noises, vibrations and poor fuel consumption. Never
use different brands together.
Automatic transmission
Fluid capacity*7.5 L (7.9 qt., 6.6 Imp. qt.)
Fluid typeToyota Genuine ATF WS
NOTICE
■Transmission fluid type
Using automatic transmission fluid other than “TOYOTA Genuine ATF WS” may
cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmission of your vehicle.
Manual transmission
Fluid capacity*2.2 L (2.3 qt., 1.9 Imp. qt.)
Fluid type
Use either of the following:
 “MT GEAR OIL LV 75W”
 Other gear oil that meets API GL-4* and SAE
75W specifications

3748-1. Specifications
*: The recommended oil grade is API GL-4. However, API GL-3 can also be used.
*1: Minimum pedal clearance when depressed with a force of 300 N (30 kgf, 67 lbf)
while the engine is running.
Carpet
Brake pedal
Pedal clearance
NOTICE
■Transmission fluid type
If oil other than “MT GEAR OIL LV 75W” is used, the following may be experi- enced:
●The overall performance and function of the transmission may be adversely affected.
●Rattling noises may occur during idling and fuel consumption may increase.
Never use different brands together.
Clutch
Pedal free play
Left-hand drive vehicles
4.3 16.4 mm (0.170.65 in.)
Right-hand drive vehicles
4.1 15.7 mm (0.160.62 in.)
Fluid typeSAE J1703 or FMVSS No.116 DOT 3
Brakes
Pedal clearance*174 mm (2.91 in.) Min.
Pedal free play0.51.5 mm (0.0200.059 in.)
Parking brake lever travel*27 - 8 clicks
Fluid typeSAE J1703 or FMVSS No.116 DOT 3 or SAE
J1704 or FMVSS No.116 DOT 4
A
C