2022 TOYOTA GR86 Owners Manual (in English)

67
6
6-2. Radio operation
Audio
6-2.Radio operation
The FM/AM radio operation screen
can be accessed by selecting “FM”
or “AM” on the radio control screen.
( P. 6 4 )
Select to change radio modes.
Select to displa y the sound cus-
tomisation screen. ( P.65)
Select to display the radio text.*
Select to display the radio set-
ting screen. ( P. 3 7 )
Select to change the preset sta-
tion list.
Select to step up/down frequen-
cies.
Select and hold to seek frequen-
cies.
Select to change the radio fre-
quency and begin scanning for
receivable radio stations. The
scanning operation will be per-
formed every 10 seconds con-
tinuously.
Select again to stop at a
received radio station.
Select to automatically register
radio stations with high recep-
tion quality to the preset stations
list.
Select to display a list of receiv-
able stations. ( P. 6 8 )
Select to display the PTY select
screen. ( P. 6 8 )*
Select to tune to preset stations.
*: FM Radio only
Turn to adjust the volume.
Press to mute the audio/visual
system.
Press and hold to turn the
audio/visual system off, and
press and hold to turn it on
again.
Turn to step up/down frequen-
cies.
Press and hold to display the
sound customisation screen.
( P. 6 5 )
Press to seek up/down available
AM radio/FM radio
Overview
Control screen
A
B
C
D
E
F
G
Control panel
H
I
J
K
A
B
C

686-2. Radio operation
stations.
●The radio automatically changes to
stereo reception when a stereo broad-
cast is received.
Stations can be registered as pre-
sets.
1 Tune to the desired station.
2 Select and hold one of the
desired preset station buttons.
 To change the preset station to a
different one, follow the same
procedure.
A station list can be displayed.
1 Select “Station List”.
 “Update”: Select to update the
station list.
FM only
2 Select the desired list.
 “All”: Select to display all sta-
tions.
 “Genres”: Select to display cate-
gories.
3 Select the desired station.
The station of a selected PTY (Pro-
gramme Type) can be seeked.
1 Select “PTY Select”.
2 Select the desired PTY.
3 Select “Seek”.
*: This function is not available in some
countries/areas.
This function allows your radio to
receive station and programme
information from radio stations
which broadcast this information.
Depending on the availability of
RDS infrastructure, this function
may not operate properly.
■TA (Traffic Announcement)
function
A pop-up screen is displayed on the
screen and a traffic announcement
is played when, a traffic announce-
ment is received.
●This function can be turned on/off.
( P. 3 7 )
■AF (Alternative Frequency)
function
A station providing good reception
is automatically se lected if current
reception worsens.
●This function can be turned on/off. ( P. 3 7 )
■Emergency announcement
A pop-up screen is displayed on the
screen and an emergency
announcement is played when an
emergency alarm is received.
Registering a station as a
preset
Selecting a station from the
list
PTY select function
Radio data system*

69
6
6-2. Radio operation
Audio
■News announcement
A pop-up screen is displayed on the
screen and a news announcement
is played when, a news announce-
ment is received.
●This function can be turned on/off.
( P. 3 7 )
*: Use of this function may not be possi-
ble depending on country and vehi-
cle.
DAB operation screen can be
accessed by selecting “DAB” on the
radio control screen. ( P. 6 4 )
Select to change radio modes.
Select to display the sound cus-
tomisation screen. ( P. 6 5 )
Select to display dynamic infor-
mation.
Select to display the radio set-
ting screen. ( P.37)
Select to change the service
component and begin scan-
ning. The scanning operation
will be performed every 10 sec-
onds continuously.
Select again to stop at a
received service component.
Select to display the time shift
operation buttons. ( P. 7 1 )
DAB*
Overview
Control screen
A
B
C
D
E
F

706-2. Radio operation
Select to display a list of receiv-
able stations. ( P. 7 0 )
Select to displa y the PTY select
screen. ( P. 7 1 )
Select to change the preset sta-
tion list.
When “Seek” has been selected
for the “Tuning Method”: Select
and hold to search for receiva-
ble service components.
When “Manual Tune” has been
selected for the “Tuning
Method”: Select and hold to tune
to the next service component.
Select to tune to preset ser-
vices.
Turn to adjust the volume.
Press to mute the audio/visual
system.
Press and hold to turn the
audio/visual system off, and
press and hold to turn it on
again.
Turn to step up/down services.
Press and hold to display the
sound customisation screen.
( P. 6 5 )
Press to seek up/down available
ensembles.
Services can be registered as pre-
sets.
1 Tune to the desired service.
2 Select and hold one of the
desired preset station buttons.
 To change the preset service to a
different one, follow the same
procedure.
A service/component list can be
displayed.
1 Select “Station List”.
2 Select the desired item.
 “All”: Select to display all ensem-
bles.
 “Genres”: Select to display cate-
gories.
 “Update”: Select to update the
station list.
3 Select the desired service/ser-
vice component.
Control panel
G
H
I
J
K
A
B
Registering a service as a
preset
Selecting a service/service
component from the list
C

71
6
6-2. Radio operation
Audio
The service components of a
selected PTY (Programme Type)
can be seeked.
1 Select “PTY Select”.
2 Select the desired PTY.
3 Select “Seek”.
This function allows your radio to
receive station and programme
information from radio stations
which broadcast this information.
Depending on the availability of
RDS infrastructure, this function
may not operate properly.
■Traffic announcements func-
tion
A pop-up screen is displayed on the
screen and a traffic announcement
is played when, a traffic announce-
ment is received.
●This function can be turned on/off. ( P. 3 7 )
A service/component can be
cached and played back in a
time-shifted manner.
A service/component that is cur-
rently being listened to can be
cached.
■Playing back the cache
A service/component cached in the
programme cache can be played
back.
1 Select “Time Shift”. (P. 6 9 )
2 Select the desired time shift
operation button.
Shows the current playback
location.
The playback location can be
changed by dragging the slid-
ers.
Select to display the preset
ensembles. ( P. 6 9 )
Select: Rewind 5 seconds.
Select and hold: Continuously
rewind in 5 second intervals.
Pauses or plays the ser-
vice/component.
Select: Fast forward 5 seconds.
Select and hold: Continuously
fast forward in 5 second inter-
vals.
●The time displayed on the bar scale
may differ from the actual time.
PTY select function
Radio data system
Time shift operation
A
B
C
D
E

726-3. Media operation
6-3.Media operation
The USB Audio/Video playback
screen can be accessed with the
following methods:
 Connect a USB memory device.
( P. 1 9 )
 Select “USB” on the media con-
trol screen. ( P.64)
Audio
Video
Select to switch between other
media sources.*
Displays cover art.
Select to display the sound cus-
tomisation screen. ( P. 6 5 )*
Shows progress.
The playback location can be
changed by dragging the slid-
ers.
Select to search for a track/file.*
Changes between repeat cur-
rent album/folder  repeat cur-
rent track/file  cancel repeat
each time this button is
selected.*
Select to enable/disable random
playback for the tracks currently
playing from the USB memory
device.
Select to pause/play.*
Select to change the track/file.
Select and hold to fast for-
ward/rewind.*
Select to change the video set-
tings.*
“Screen Size Change”: Select to adjust
the screen size.
Select “Full Wide” to enlarge the image
horizontally to fill the screen.
Select “Original” to display the image
with its native width.
“Play State Indication”: Select to display
detailed information about the currently
playing video.
Select to stop the video screen.*
USB memor y
Audio files and video files on a
USB memory device can be
played back/viewed. While
driving, video will not be dis-
played. Only sound will be out-
put.
Overview
Control screen
A
B
C
D
E
F
G
H
I
J
K

73
6
6-3. Media operation
Audio
*: This switch will be displayed when
the video screen is touched.
Turn to adjust the volume.
Press to mute the audio/visual
system.
Press and hold to turn the
audio/visual system off, and
press and hold to turn it on
again.
Turn to change the track/file.
Press and hold to display the
sound customisation screen.
( P.65)
Press to change a track/file.
Press and hold to fast for-
ward/rewind.
●Depending on the device or music file
being played, the cover art may not be
displayed.
Control panel
WA R N I N G
●Do not operate the player’s controls or connect the USB memory device
while driving.
A
B
C
NOTICE
●Do not leave your portable player in
the vehicle. In particular, high tem-
peratures inside the vehicle may damage the portable player.
●Do not push down on or apply unnecessary pressure to the porta-
ble player while it is connected as
this may damage the portable
player or its terminal.
●Do not insert foreign objects into
the port as this may damage the portable player or its terminal.

746-3. Media operation
1Connect an iPod/iPhone to the
USB port. ( P. 1 9 )
2 Check the confirmation mes-
sage, and then select “No”.
 If “Don’t show again.” is selected,
the confirmation message will
not be displayed again.
If the connected iPhone is recog-
nised as an Apple CarPlay
device, select the device from
the Apple CarPlay device list to
remove the check mark. ( P. 5 9 )
Select “iPod/iPhone” on the media
control screen. ( P. 6 4 )
When not connected as an Apple
CarPlay device
When connected as an Apple
CarPlay device
Select to switch between other
media sources.
Displays cover art.
Select to display the sound cus-
tomisation screen. ( P. 6 5 )
Shows progress.
The playback location can be
changed by dragging the slid-
iPod/iPhone
When an iPod/iPhone is con-
nected, you can play
iPod/iPhone music files. On
this unit, you can perform
operations such as selecting a
file from a list or changing to
the random playback mode.
Connecting the iPod/iPhone
Overview
Control screen
A
B
C
D