115
3
3-2. Opening, closing and locking the doors and trunk
Before driving
cedure used to disable it again.
When enabled a buzzer will sound.
■Door opening/closing method
Make sure to firmly press the door lock
switch in steps 4 and 6. If the switch is
pressed for a very short time, the sys- tem may not be disabled.
■Wireless remote control method
To use the wireless remote control
method to disable the smart entry & start system, it is necessary to register a PIN
code for the PIN code smart entry.
( P.115)
■When enabling the smart entry & start system
If the method used to disable the smart
entry & start system is unknown, press the engine switch.
●If the wireless remo te control system was used, a buzzer inside the vehicle
will sound.
●If the door opening/closing method
was used, the buzzer will not sound.
■Customization
Some functions can be customized. ( P.377)
By registering a 5 digit PIN code, all
of the doors and the fuel filler door
can be unlocked without an elec-
tronic key by pressing the trunk
opener switch.
■PIN code registration method
1 Turn the engine switch off.
2 Close all of the doors and the
trunk.
3 Press and hold of the wire-
less remote control.
At this time, all of the doors and the fuel filler door will lock.
4 Within 5 seconds of performing
step 3, press and hold the trunk
opener switch.
After 5 seconds or more, a buzzer will sound.
5 Release of the wireless
remote control and the trunk
opener switch.
6 Within 30 seconds after the
buzzer begins sounding, press
of the wireless remote con-
trol.
The buzzer will stop.
7 A PIN code can now be regis-
tered. Press the trunk opener
switch the same number of
times as the first digit of the PIN
code.
For example: If registering 32468, press the switch 3 times.
NOTICE
■When disabling the smart entry &
start system
When disabling or enabling the sys- tem to accommodate persons with
implantable cardiac pacemakers, car-
diac resynchronization therapy pace- makers or implantable cardioverter
defibrillators, always use the door
opening/closing method. If the wire- less remote control method is used,
the system may be enabled acciden-
tally.
Unlocking the doors using
PIN code smart entry
1644-4. Refueling
the cap is released, it will turn
slightly in the opposite direction.
2 Close the fuel filler door, and
press the center of the rear
edge of the fuel filler door until
you hear a click.
When you lock the doors, the fuel filler door will also lock.
■When closing the fuel filler door
Do not lock the doors before closing the
fuel filler door, as the fuel filler door can- not be closed if the doors are locked. If
the doors are locked and the fuel filler
door cannot be closed, unlock the doors and then close the fuel filler door.
WA R N I N G
■When replacing the fuel tank cap
Do not use anything but a genuine
Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or
other incident which may result in
death or serious injury.
