2019 MAZDA MODEL CX-30 Owners Manual (in English)

Do not enter signs
xA do not enter sign is displayed
when all of the following conditions
are met.
xThe vehicle speed is about 80
km/h (50 mph) or slower.
xThe Forward Sensing Camera (FSC)
recognises a do not enter sign as a
sign targeted for your vehicle and
the vehicle passes it.
xWhen the Forward Sensing Camera
(FSC) recognises the do not enter
sign and a certain period of time has
elapsed since the vehicle passed the
sign, display of the do not enter sign
stops.
Stop sign
xA stop sign is displayed when all of
the following conditions are met:
xThe vehicle speed is about 40
km/h (25 mph) or slower.
xThe Forward Sensing Camera (FSC)
recognises a stop sign as a sign
targeted for your vehicle.
xWhen a certain period of time has
elapsed since the stop sign was
displayed, display of the stop sign
stops.
Passing prohibited sign
*
xA passing prohibited sign is displayed
when all of the following conditions
are met.
xThe vehicle speed is about 1 km/h
(0.6 mph) or more.
xThe Forward Sensing Camera (FSC)
recognises a passing prohibited
sign as a sign targeted for your
vehicle and the vehicle passes it.
xIn the following cases, the display of
the passing prohibited sign stops.
xThe Forward Sensing Camera (FSC)
recognises a passing prohibited
sign and you drive a certain
distance after passing the sign.
When Driving
i-ACTIVSENSE
*Some models.4-115

▼Excessive Speed Warning
If the vehicle speed exceeds the speed limit sign displayed in the active driving
display/instrument cluster, the area around the speed limit sign flashes in amber and
the warning sound is activated at the same time. If the vehicle speed continues to
exceed the displayed speed limit sign, the indication stops flashing and remains on.
Check the surrounding conditions and adjust the vehicle speed to the legal speed
using the appropriate operation such as depressing the brake pedal.
1. Vehicle is doing 90 km/h when 80 km/h speed limit sign is recognised.
2. Vehicle continues to do 90 km/h after 80 km/h speed limit sign is passed.
3. Active driving display indication
4. Instrument cluster

The excessive speed warning is initially set to visual only. If you want to activate the
excessive speed warning , change the setting in the personalisation features. In
addition, the warning pattern and the warning activation timing differ depending on
the setting contents.
Refer to the Settings section in the Mazda Connect Owner's Manual.
Speed Limit Sign Alert setting
xOff: The excessive speed warning is not activated.xVisual: The area around the speed limit sign displayed in the display
flashes in
amber, and if the vehicle speed continues to exceed the displayed speed limit
sign, the indication stops
flashing and remains on.
xVisual + Audible: The area around the speed limit sign displayed in the display
flashes in amber and the warning sound is activated at the same time. If the
vehicle speed continues to exceed the displayed speed limit sign, the indication
When Driving
i-ACTIVSENSE
4-116

stops flashing and remains on. The warning sound is activated continuously until
the vehicle speed decreases below the speed limit sign.
Speed Limit Sign Threshold setting
x+ 0: If the vehicle speed exceeds the speed limit sign displayed in the display, the
excessive speed warning is activated.
x+ 5: If the vehicle speed exceeds the speed limit sign displayed in the display by 5
km/h (3 mph), the excessive speed warning is activated.
x+ 10: If the vehicle speed exceeds the speed limit sign displayed in the display by
10 km/h (5 mph), the excessive speed warning is activated.
NOTE
xIn the following cases, the excessive speed warning stops operating.
xThe vehicle speed is less than the speed of the displayed speed limit sign. (If the
activation timing for the excessive speed warning is changed in the
personalisation features, the excessive speed warning stops operating when the
vehicle speed is less than the changed vehicle speed.
xA speed limit sign indication has been updated and the vehicle speed is lower
than the updated indication.
xDisplay of the speed limit sign stops.xThe warning indication is displayed at the same time the excessive speed warning
sound is activated if the vehicle speed exceeds the speed indicated on the speed
limit sign.
Refer to Excessive Speed Warning on page 7-72.
xIf the Forward Sensing Camera (FSC) or data recorded in the navigation system
incorrectly recognises the actual speed limit sign at a lower speed, the excessive
speed alarm is activated even if the vehicle is driven at the legal speed.
When Driving
i-ACTIVSENSE
4-117

Distance & Speed Alert
(DSA)
*
▼Distance & Speed Alert (DSA)
The DSA is a system which provides
advice for maintaining the appropriate
distance between vehicles and
notifies
the driver of the recommended, safe
distance to maintain with a vehicle
ahead. The system measures the
distance between your vehicle and a
vehicle ahead while the vehicle speed
is about 30 km/h (19 mph) or faster. If
the distance between your vehicle and
the vehicle ahead is continuously
close, the system alerts the driver of a
possible collision using an indication
on the display and suppresses your
vehicle speed
*1 to prevent it from
approaching the vehicle ahead too
closely.
*1 The function which suppresses your
vehicle speed is not available in
some markets.
WARNING
Do not rely completely on the
DSA:
The ability of the system to detect a
vehicle ahead is limited depending on
the type of vehicle ahead, weather
conditions, or traffic conditions. In
addition, the system is not for
maintaining the distance between your
vehicle and a vehicle ahead. If you
neglect to operate the accelerator and
brake pedals correctly, it could lead to
an accident. Always check the safety of
the surrounding area and depress the
brake pedal or accelerator pedal while
keeping a safe distance from vehicles
ahead or on-coming vehicles.
Operation conditions
The DSA operates when the following
conditions are all met.
xThe ignition is switched ON.xThe DSA is turned on.xThe shift lever (manual transmission
vehicle) or the selector lever
(automatic transmission vehicle) is in
a position other than R.
xThe vehicle speed is about 30 km/h
(19 mph) or faster.
xi-ACTIVSENSE status symbol
(warning/risk avoidance support
system) (green) is displayed.
NOTE
xThe objects which activate the
system are four-wheeled vehicles.
xThe DSA may also operate in the
presence of motorcycles and
bicycles.
xThe DSA may not operate normally
when the speed of a vehicle ahead is
too slow.
xThe system does not operate with
the following objects.
xVehicles approaching in the
opposite direction.
xStationary objects (stopped
vehicles, obstructions)
xThe DSA can be set to inoperable.
x(If only the DSA is turned off)
Refer to the Settings section in the
Mazda Connect Owner's Manual.
x(If the DSA is turned off by
operating the i-ACTIVSENSE
switch)
Refer to i-ACTIVSENSE Switch on
page 4-97.
When Driving
i-ACTIVSENSE
4-118*Some models.

xIf the ignition is switched OFF while
you have cancelled the system using
the i-ACTIVSENSE switch, the system
is automatically enabled the next
time the ignition is switched ON.
However, if the system is cancelled
using the personalisation features,
the system is not automatically
enabled.
▼Vehicle Ahead Close Proximity
Warn in g
When the system determines that the
distance between your vehicle and a
vehicle ahead is close, the
i-ACTIVSENSE status symbol (warning/
risk avoidance support system)
changes from green to amber and the
warning indication is displayed on the
multi-information display. While
checking the safety of the surrounding
area, depress the brake pedal while
keeping a safe distance from the
vehicle ahead.
Driver Attention Alert
(DAA)
*
▼Driver Attention Alert (DAA)
The DAA is a system which detects
driver fatigue and decreased
attentiveness, and encourages the
driver to take a rest.
When the vehicle is driven inside traffic
lane lines at about 65 to 140 km/h
(41 to 86 mph), the DAA estimates the
amount of accumulated fatigue and
decreased attentiveness of the driver
based on the information from the
Forward Sensing Camera (FSC) and
other vehicle information, and
encourages the driver to take a rest
using an indication on the
multi-information display and a
warning sound.
Use the DAA on expressways or
highways.
Refer to Forward Sensing Camera
(FSC) on page 4-216.
When Driving
i-ACTIVSENSE
*Some models.4-119

WARNING
Do not rely completely on DAA and
always drive carefully:
The DAA detects driver fatigue and
decreased attentiveness and
encourages the driver to take a rest,
however, it is not designed to prevent
the vehicle from straying. If you rely too
much on the DAA it could lead to an
accident. Drive carefully and operate
the steering wheel appropriately.
In addition, the system may not be
able to detect driver fatigue and
decreased attentiveness correctly
depending on the
traffic and driving
conditions. The driver must take
sufficient rest in order to drive safely.
NOTE
xThe DAA operates when all of the
following conditions are met.
xThe vehicle speed is about 65 to
140 km/h (41 to 86 mph).
xThe system detects white (yellow)
lane lines.
xThe system has completed learning
of the driver’s driving data after 60
minutes have passed since the
driver began driving vehicle.
xThe DAA does not operate under the
following conditions.
xThe vehicle speed is less than
about 65 km/h (41 mph).
xThe vehicle speed exceeds about
140 km/h (86 mph)
xThe vehicle is making a sharp turn.xThe vehicle is changing lanes.xThe system cannot detect white
(yellow) lane lines.
xThe DAA may not operate normally
under the following conditions.
xWhite (yellow) lane lines are less
visible because of dirt or fading/
patchiness.
xThe vehicle is jolted or swayed
continuously by strong winds or
rough roads.
xThe vehicle is driven aggressively.xWhen making frequent lane
changes.
xThe vehicle is making a curve.xThe DAA detects driver fatigue and
decreased attentiveness based on
the driving data when the vehicle is
driven at about 65 to 140 km/h (41
to 86 mph) for about 20 minutes.
The driving data will be reset under
the following conditions.
xThe vehicle is stopped for 15
minutes or longer.
xThe vehicle is driven at less than
about 65 km/h (41 mph) for
about 30 minutes.
xThe ignition is switched
off.xAfter the DAA has displayed the first
message encouraging rest, it does
not display the next one until 60
minutes have passed.
▼Driver Attention Alert (DAA)
Display
When the system detects driver fatigue
or decreased attentiveness, it activates
the warning sound and displays an
alert in the multi-information display.
When Driving
i-ACTIVSENSE
4-120

1. “Time for a Break” message is
displayed
▼Cancelling Driver Attention Alert
(DAA)
The DAA can be set to not activate.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Driver Monitoring (DM)*
▼Driver Monitoring (DM)
The DM is a system which detects
driver fatigue and sleepiness, and
encourages the driver to take a rest.
While driving the vehicle at about 5
km/h (3 mph) or faster, the DM
detects changes in the driver's facial
features using the driver monitoring
camera. The system then estimates the
amount of accumulated fatigue and
sleepiness of the driver and encourages
the driver to take a rest using a warning
indication in the instrument cluster and
a warning sound.
Two types of warning indication
patterns are set for notifying the driver
based on the estimated amount of
accumulated fatigue and sleepiness of
the driver.
xFatigue and sleepiness are detected:
Warning pattern (caution)
xMuch more fatigue and sleepiness
are detected: Warning pattern
(warning)
When Driving
i-ACTIVSENSE
*Some models.4-121

WARNING
Do not rely completely on the DM
and always drive carefully:
The DM is a system which detects
driver fatigue and sleepiness, and
encourages the driver to take a rest.
This is not designed to prevent driver
fatigue and sleepiness, and
over-reliance on the system could lead
to an accident. Drive carefully and turn
the steering wheel appropriately.
In addition, the system may not be
able to detect driver fatigue and
sleepiness correctly depending on the
traffic and driving conditions. The
driver must take
sufficient rest in order
to drive safely.
Operation conditions
The DM begins monitoring after 20
minutes have passed since the driver
began driving the vehicle and when
the vehicle speed is about 5 km/h (3
mph) or faster.
NOTE
xIf the vehicle speed decreases to less
than about 5 km/h (3 mph) while
the DM is monitoring, the DM stops
monitoring for 6 minutes even if the
vehicle speed returns to about 5
km/h (3 mph) or faster.
xIf the driver monitoring camera does
not recognise the driver correctly, the
DM may not monitor correctly.
Refer to Driver Monitoring Camera
on page 4-226.
xAfter the DM has displayed the
first
message encouraging the driver to
take a rest, it does not display it
again during the following periods.
xAfter displaying the warning
pattern (caution), the next warning
pattern (caution) is not displayed
until 45 minutes have passed.
xAfter displaying the warning
pattern (warning), the next
warning pattern (warning) is not
displayed until 15 minutes have
passed.
xAfter displaying the warning
pattern (warning), the next
warning pattern (caution) is not
displayed until 45 minutes have
passed.
▼Driver Monitoring (DM) Display
When the Driver Monitoring (DM)
detects driver fatigue or sleepiness, it
activates the warning sound and
displays an alert in the instrument
cluster.
Warning pattern (caution) (white)
1. “Time for a Break” message is
displayed

When Driving
i-ACTIVSENSE
4-122