2019 MAZDA MODEL CX-30 Owners Manual (in English)

Always confirm the safety of the area
around the power liftgate before
operating it electrically.
Not checking the area around the
liftgate for people before operating it
using the power liftgate switch or the
button on the keyless entry system is
dangerous. A person could become
caught between the liftgate and an
obstruction while it is opening
electrically or between the liftgate and
vehicle while it is closing electrically,
resulting in an accident and serious
injury.
Never allow children to operate the
power liftgate system:
Allowing children to operate the
power liftgate switch and the keyless
entry system is dangerous. Children are
not aware of the dangers of people
getting
fingers and hands caught in a
moving liftgate. If someone's neck,
head or hands get caught in a closing
door, it could result in death or serious
injury.
CAUTION
¾When closing the power liftgate,
make sure there are no foreign
objects around the striker. If foreign
objects are obstructing the striker,
the liftgate may not close properly.
1. Striker

¾Do not install accessories to the
power liftgate other than specified
accessories. Otherwise, it cannot be
opened/closed automatically and
could result in a malfunction.
¾Be careful when switching the power
liftgate from electrical to manual
operation. The power liftgate may
open/close unexpectedly depending
on its position which could result in
injury.
NOTE
xDo not apply unnecessary force to
the power liftgate when it is
opening/closing electrically.
Unnecessary force on the liftgate
may cause it to reverse direction of
movement automatically. Also, it
could result in a malfunction.
xThe power liftgate may not open/
close electrically if the vehicle is
parked on an incline, or there is
strong wind, or the liftgate is laden
with snow.
xIf a power liftgate system fuse has
blown, the liftgate cannot be opened
using the power liftgate switch or the
electric liftgate opener. Use the
emergency lever to open the liftgate.
xFully close the power liftgate before
disconnecting the vehicle battery. If
the battery is disconnected with the
liftgate open, it cannot be opened or
closed automatically after the battery
is reconnected. If this happens, fully
close the liftgate manually to restore
the auto full open/close function.
xIf the system detects weight such as
that caused by a snow-laden liftgate
when it is opened electrically, after
the beep activates three times, the
liftgate stops after reversing.
xIf the power liftgate is snow-laden,
remove the snow before operating
the liftgate.
Before Driving
Doors and Locks
3-23

Operation using the transmitter
When the power liftgate button on the
transmitter is pressed and held for
about 1 second or longer with all of
the following conditions met, the
hazard warning lights flash 2 times, a
beep sound is activated, and the
liftgate automatically opens/closes
fully.
xThe ignition is switched OFF.xThe vehicle is stopped.
Refer to Transmitter on page 3-5.
NOTE
xWhen opening the liftgate by
pressing the power liftgate button on
the transmitter, the liftgate can be
opened even when it is locked.
xIf the power liftgate button on the
transmitter is pressed while the
liftgate is opening/closing
electrically, the beep is activated and
the liftgate stops. When pressing the
power liftgate button again, the
liftgate moves in the reverse
direction.
Operation using switch only for
power liftgate
Operation conditions
Opening the liftgate
If the vehicle has satisfied all the
following operation conditions, the
power liftgate can be opened using the
power function.
xAll doors and the liftgate are
unlocked.
xThe vehicle is stopped.x(Manual transmission)
The ignition is switched to a position
other than ON, or when the parking
brake is applied with the shift lever in
N and the ignition switched ON.
x(Automatic transmission)
The ignition is switched to a position
other than ON, or the selector lever
is in P with the ignition switched ON.
Closing the liftgate
xThe vehicle is stopped.x(Manual transmission)
The ignition is switched to a position
other than ON, or when the parking
brake is applied with the shift lever in
N and the ignition switched ON.
x(Automatic transmission)
The ignition is switched to a position
other than ON, or the selector lever
is in P with the ignition switched ON.
NOTE
If the shift lever/selector lever is shifted
to another position and the vehicle is
moved while the liftgate is opening/
closing automatically, the liftgate
operates as follows:
xWhen the liftgate is opening
A beep sound is activated, and the
liftgate moves in the reverse
direction automatically and closes.
xWhen the liftgate is closing
A beep sound is activated, but the
liftgate continues to close.
Operation from the driver's seat (To
open/close)
Press the power liftgate switch for
about 1 second or longer while the
liftgate is in the fully closed/open
position. The hazard warning lights
Before Driving
Doors and Locks
3-24

flash twice and the liftgate opens/
closes fully after a sound is activated.
Operation from outside (To open)
Press the electric liftgate opener on the
liftgate. The hazard warning lights flash
twice and the liftgate opens
automatically after the beep sound is
heard.
(With the advanced keyless function)
A locked liftgate can also be opened
while the key is being carried.
Operation from outside (To close)
Press the power liftgate close switch
while the liftgate is fully opened. The
hazard warning lights flash twice and
the liftgate closes automatically after
the beep sound is heard.
(With the advanced keyless function)
(Without the advanced keyless
function)
Operation using door-lock switch
(With the advanced keyless function)
When the door-lock switch on the
liftgate is pressed, the liftgate fully
closes automatically after all the doors,
fuel-filler flap, and the liftgate are
locked.
For details such as the operation
conditions, refer to Locking , Unlocking
with Door-Lock Switch on page 3-16.
Automatic open/close stop function
The liftgate can be stopped at a
desired position while it is opening/
closing automatically.
Stopping the liftgate
If any of the following operations is
done while the liftgate is opening/
Before Driving
Doors and Locks
3-25

closing automatically, the liftgate is
stopped.
xThe power liftgate button on the
transmitter is pressed.
xThe power liftgate switch is pressed.xThe electric liftgate opener on the
liftgate is pressed.
xThe power liftgate close switch is
pressed.
x(With the advanced keyless
function)
The door-lock switch on the liftgate
is pressed.
NOTE
The liftgate cannot be stopped in the
area about 20 cm (7.9 in) away from
the fully-closed position. It moves in
the close direction by the load weight
of the liftgate itself.
Moving the liftgate again
If any of the following operations is
done, the liftgate moves in the
direction opposite to the direction it
was moving before it stopped.
xThe power liftgate button on the
transmitter is pressed for about 1
second or longer.
xThe power liftgate switch is pressed
for about 1 second or longer.
xThe electric liftgate opener on the
liftgate is pressed.
xThe power liftgate close switch is
pressed.
(With the advanced keyless function)
When the door-lock switch on the
liftgate is pressed, the liftgate
automatically closes.
Changing the power liftgate fully
open position
The power liftgate fully-open position
can be changed according to the
height of a garage.
When changing the position
1. Stop the liftgate at the desired
position.
2. Press the power liftgate close switch
for about three seconds.
A beep sound is activated two
times to indicate that the position
change has been completed.
NOTE
Set the desired fully-open position of
the liftgate at the position where it is
open more than halfway. The position
where it is less than halfway open
cannot be set.
To re s e t
1. Open the liftgate.
2. Press the power liftgate close switch
for about seven seconds.
A beep sound is activated three
times to indicated that the reset has
been completed.
NOTE
After about 3 seconds have elapsed
since the switch was pressed, a beep
sound is activated 2 times to indicate
that the liftgate fully-open position has
changed. Continuously press the
switch for about 7 seconds to
complete the reset.
Jam-safe equipment
While the power liftgate is opening/
closing electrically and the system
detects a person or an object in the
liftgate's path, the liftgate will move in
the reverse direction automatically and
stops.
Before Driving
Doors and Locks
3-26

WARNING
Always check the area around the
power liftgate before opening/closing
it:
Not checking for occupants and
objects around the power liftgate
before opening/closing it is
dangerous. The jam-safe equipment is
designed to prevent jamming in the
event an obstruction is in the liftgate's
path. The system may not detect
certain objects obstructing the liftgate
depending on the way they are
positioned and their shape. However,
if the jam-safe function detects an
obstruction and moves the liftgate in
the reverse direction, an occupant in
the liftgate's path could be seriously
injured.
CAUTION
Sensors are installed on both ends of
the power liftgate. Be careful not to
allow the sensors to be scratched or
damaged by sharp objects, otherwise
the liftgate may no longer open/close
automatically. In addition, if the sensor
is damaged while the liftgate is closing
automatically, the system will stop.
1. Sensor
NOTE
The jam-safe equipment does not
activate during easy closure operation
when the power liftgate is between the
near-shut position and fully closed
position.
When the power liftgate is moving in
the open/close direction and an
obstruction is detected, the beep
sound will be heard and the liftgate
moves in the reverse direction and
stops.
Liftgate easy closure
The Easy Closure system automatically
closes the liftgate completely from the
near-shut position.
This system also operates when the
liftgate is closed manually.
WARNING
When closing a liftgate, always keep
hands and fingers away from the
liftgate:
Placing hands or fingers around a
liftgate is dangerous because the
liftgate closes automatically from the
near-shut position, which could cause
hands and fingers to be pinched and
injured.
NOTE
xIf the electric liftgate opener is
pressed while the easy closure
function is operating , the liftgate can
be opened.
xIf the liftgate is opened/closed
repeatedly in a short period of time,
the easy closure function may not
operate. Wait for about 2 seconds
and then try again.
Before Driving
Doors and Locks
3-27

▼Luggage Compartment
Luggage compartment cover*
WARNING
Do not place anything on top of the
cover:
Placing luggage or other cargo on top
of the luggage compartment cover is
dangerous. During sudden braking or a
collision, the cargo could become a
projectile that could hit and injure
someone. The vehicle has a light
weight luggage compartment cover to
keep the contents of your luggage area
out of sight; it will not retain heavy
objects that are not tied down in an
accident such as a rollover. Tie down
all heavy objects, whether luggage or
cargo, using the tie down hooks.
Make sure luggage and cargo are
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
CAUTION
¾Make sure the luggage compartment
cover is firmly secured. If it is not
firmly secured, it could unexpectedly
disengage resulting in injury.
The luggage compartment can be
accessed by opening the liftgate when
the straps are attached to the sides of
the liftgate.

Removing the luggage compartment
cover
This cover can be removed for more
room.
1. Remove the straps from the hooks.
2. Press the luggage compartment
cover upward from near the pins
and remove the luggage
compartment cover from the pins.
1. Pin

3. Lift the front end of the luggage
compartment cover and remove it.
Before Driving
Doors and Locks
3-28*Some models.

Fuel and Engine Exhaust Precautions
▼Fuel Requirements
(SKYACTIV-G 2.0,
SKYACTIV-G 2.5,
SKYACTIV-X 2.0)
Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED
FUEL, which will reduce exhaust emissions and keep spark plug fouling to a
minimum.

To achieve maximum engine performance, use the
specified fuel.
FuelResearch Octane
NumberCountry
Premium unleaded
fuel (Conforming to
EN 228 and within
E10)
*1
95 or aboveAlbania, Algeria, Andorra, Antigua, Armenia, Aruba,
Austria, Azerbaijan, Barbados, Belarus, Belgium, Ber-
muda, Bolivia, Bosnia and Herzegovina, Botswana,
Brunei, Bulgaria, Canary Islands, Croatia, Cyprus,
Czech, Denmark, Estonia, F. Guiana, Faeroe, Finland,
France, Georgia, Germany, Greece, Grenada, Guade-
loupe, Guatemala, Honduras, Hong Kong, Hungary,
Iceland, Iran, Ireland, Israel, Italy, Jamaica, Kazakh-
stan, Latvia, Lebanon, Lesoto, Libya, Liechtenstein,
Lithuania, Luxembourg, Macau, Macedonia, Mada-
gascar, Malaysia, Malta, Martinique, Mauritius, Mol-
dova, Monaco, Mongolia, Montenegro, Morocco, Na-
mibia, New Caledonia, Nicaragua, Norway, Poland,
Portugal, Reunion, Romania, Russia, SanMarino, Saudi
Arabia
*2, Serbia, Seychelles, Singapore, Slovakia, Slov-
enia, South Africa, Spain, ST. Lucia, St. Martin, ST. Vin-
cent, Surinam, Swaziland, Sweden, Switzerland, Tahiti,
Taiwan, The Netherlands, Tunisia, Turkey, UAE, UK,
Ukraine, Uruguay, Vanuatu, Vatican
Premium unleaded
fuel (within E85)
95 or above Thailand
Before Driving
Fuel and Emission
3-29

FuelResearch Octane
NumberCountry
Regular unleaded fuel92 or above Egypt, Myanmar
90 or aboveAngola, B. Virgin, Bahrain, Burundi, Cambodia, Came-
roon, Chile, Colombia, Commonwealth of Dominica,
Costa Rica, Curacao, Dominican Republic (LHD),
Ecuador, El Salvador, Fiji, Gabon, Ghana, Haiti, Indo-
nesia, Iraq, Ivory Coast, Jordan, Kenya, Kuwait, Laos,
Marshall Islands, Mozambique, Nepal, Nigeria,
Oman, Panama, Papua New Guinea, Peru, Qatar, Sau-
di Arabia
*3, Sri Lanka, Syria, Tanzania, The Philippines,
Trinidad and Tobago, Ustt*4, Vietnam, Zimbabwe
*1 Europe*2SKYACTIV-X 2.0*3
SKYACTIV-G 2.0*4 Republic of Palau & Federated States of Micronesia
Fuel with a lower rating will negatively affect the emission control system
performance and could also cause engine knocking and serious engine damage.

CAUTION
¾USE ONLY UNLEADED FUEL.
Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead
to deterioration of the emission control system and or failures.
¾The use of E10 fuel with 10 % ethanol in Europe is safe for your vehicle. Damage
to your vehicle may occur when ethanol exceeds this recommendation.
¾Never add fuel system additives other than a Mazda genuine product, otherwise
the emission control system could be damaged. Consult an expert repairer (we
recommend an Authorised Mazda Repairer) for details.
NOTE
(Premium unleaded fuel (within E85))
To maintain good engine startability and performance, the following points must be
observed.
xRefuelling using the same-type fuel is recommended.xAdd 16 L (4.2 US gal, 3.5 Imp gal) or more of fuel when refuelling.xDrive the vehicle 10 km (6.2 mile) or more just after refuelling to allow the
vehicle's engine control system to learn the ethanol concentration accurately.
▼Deposit Cleaner
To get the best performance out of our
newest-technology SKYACTIV petrol
engines, cleaning of deposits adhering
to the fuel related system, such as fuel
injectors, may be required by using a
Mazda genuine deposit cleaner in the
specified countries. Refer to
Before Driving
Fuel and Emission
3-30