Page 649 of 683
Customer Information
Declaration of Conformity
8-59
Page 650 of 683
Customer Information
Declaration of Conformity
8-60
Page 651 of 683
Customer Information
Declaration of Conformity
8-61
Page 652 of 683
Customer Information
Declaration of Conformity
8-62
Page 653 of 683
Customer Information
Declaration of Conformity
8-63
Page 654 of 683
Customer Information
Declaration of Conformity
8-64
Page 655 of 683
▼Mazda
ERA-GLONASS
Customer Information
Declaration of Conformity
8-65
Page 656 of 683

Electromagnetic
Compatibility
▼Electromagnetic Compatibility
Your Mazda has been tested and
certified to the UN-R*1 10 regulation
as related to electromagnetic
compatibility. Radio Frequency (RF)
transmitter equipment (e.g. cellular
telephones, amateur radio
transmitters, etc.) may only be fitted to
your Mazda if they comply with the
parameters shown in the table below.
*1 UN-R stands for United Nations
Regulation.
It is your responsibility to ensure that
any equipment you have
fitted
complies with applicable local
legislations. Have any equipment
fitted
by properly trained technicians.
CAUTION
¾Do not mount any transceiver,
microphones, speakers, or any other
item in the deployment path of the
air bag system.
¾Do not fasten aerial lead to original
vehicle wiring, fuel pipes or brake
pipes. Avoid running the aerial lead
parallel with the wire harness to the
best extent possible.
¾Keep the aerial and power leads at
least 100 mm (3.9 in) from any
electronic modules and the air bags.
¾Avoid using the cigar lighter or
accessory socket as a power source
for the RF-transmitting equipment.
Aerial positions:
1. Front right of roof
2. Both sides of liftgate
3. Centre of roof
4. Front left of roof
Frequency
Band (MHz)Maximum out-
put power
(Wattage)Aerial Positions
50 Š 54 50
68 Š 87.5 50
142 Š 176 50
380 Š 470 50
806 Š 940 10
1200 Š
130010
1710 Š
188510
1885 Š
202510
2400 Š
25000.01*1In a cabin*1
*1 Only for Bluetooth®
NOTE
After the installation of RF transmitters,
check for disturbances from and to all
electrical equipment in the vehicle,
both in the standby and transmit
modes.
Check all electrical equipment:
Customer Information
Electromagnetic Compatibility
8-66