2019 MAZDA MODEL CX-30 Owners Manual (in English)

NOTE
When installing a new tyre pressure
sensor, the ID signal code for the tyre
pressure sensor needs to be registered.
For details on purchasing a tyre
pressure sensor and registering the ID
signal of the tyre pressure sensor,
consult an expert repairer (we
recommend an Authorised Mazda
Repairer).
When Driving
Tyre Pressure Monitoring System (TPMS)
4-235

Petrol Particulate Filter
(SKYACTIV-X 2.0)
▼Petrol Particulate Filter
The petrol particulate filter collects and
removes most of the particulate matter
(PM) in the exhaust gas of a petrol
engine.
PM collected by the petrol particulate
filter is cleared during normal driving ,
however, PM may not be removed and
the petrol particulate filter warning
indication/warning light may
illuminate under the following
conditions:
xIf the vehicle is driven at 20 km/h
(12 mph) or less continuously.
xIf the vehicle is repeatedly driven for
a short period of time (30 minute or
less) or driven while the engine is
cold.
xIf the vehicle is idled for a long time.
Refer to Petrol Particulate Filter
Warning Indication/Warning Light on
page 7-54.
When Driving
Petrol Particulate Filter
4-236

Diesel Particulate Filter
(SKYACTIV-D 1.8)
▼Diesel Particulate Filter
The diesel particulate filter collects and
removes most of the particulate matter
(PM) in the exhaust gas of a diesel
engine.
PM collected by the diesel particulate
filter is cleared during normal driving ,
however, PM may not be removed and
the diesel particulate filter warning
indication/warning light may
illuminate under the following
conditions:
xIf the vehicle is driven at 15 km/h (9
mph) or less continuously.
xIf the vehicle is repeatedly driven for
a short period of time (10 minute or
less) or driven while the engine is
cold.
xIf the vehicle is idled for a long time.
Refer to Diesel Particulate Filter on
page 7-54.
When Driving
Diesel Particulate Filter
4-237

Rear View Monitor*
▼Rear View Monitor
The rear view monitor provides visual
images of the rear of the vehicle when
reversing.
WARNING
Always drive carefully confirming the
safety of the rear and the surrounding
conditions by looking directly with
your eyes:
Reversing the vehicle by only looking at
the screen is dangerous as it may cause
an accident or a collision with an
object. The rear view monitor is only a
visual assist device when reversing the
vehicle. The images on the screen may
be
different from the actual conditions.
CAUTION
¾Do not use the rear view monitor
under the following conditions:
Using the rear view monitor under
the following conditions is
dangerous and could result in injury
or vehicle damage or both.
¾Icy or snow-covered roads.
¾Tyre chains or a temporary spare
tyre is installed.
¾The vehicle is on a road incline.
¾When the display is cold, images
may course across the monitor or the
screen and may be dimmer than
usual, which could cause difficulty in
confirming the surrounding
conditions of the vehicle. Always
drive carefully confirming the safety
of the rear and the surrounding
conditions by looking directly with
your eyes.
¾Do not apply excessive force to the
camera. The camera position and
angle may deviate.
¾Do not disassemble, modify, or
remove it as it may no longer be
waterproof.
¾The camera cover is made of plastic.
Do not apply degreasing agents,
organic solvents, wax, or glass
coating agents to the camera cover.
If any are spilled on the cover, wipe
off with a soft cloth immediately.
¾Do not rub the camera cover
forcefully with an abrasive or hard
brush. The camera cover or lens may
be scratched which might affect the
images.
NOTE
xIf water, snow, or mud is stuck on
the camera lens, wipe it
off using a
soft cloth. If it cannot be wiped off,
use a mild detergent.
xIf the camera temperature changes
rapidly (Hot to cold, cold to hot), the
rear view monitor may not operate
correctly.
xWhen replacing the tyres, consult an
expert repairer (we recommend an
Authorised Mazda Repairer).
Replacing the tyres could result in
deviation of the guide lines which
appear on the display.
xIf the vehicle's front, side, or rear has
been involved in a collision, the
alignment of the rear view parking
camera (location, installation angle)
may have deviated. Always consult
an expert repairer (we recommend
an Authorised Mazda Repairer) to
have the vehicle inspected.
When Driving
Rear View Monitor
4-238*Some models.

xIf “No camera signal.” is indicated in
the display, there could be a
problem with the camera. Have your
vehicle inspected at an expert
repairer (we recommend an
Authorised Mazda Repairer).
x(Predicted vehicle path assist lines
display type)
If force is applied to the steering
wheel, the guide lines may not
display. Loosen your grip on the
steering wheel to allow the guide
lines to display.
▼Rear View Parking Camera
Location
1. Rear view parking camera
▼Switching to the Rear View
Monitor Display
Shift the shift lever (manual
transmission) or the selector lever
(automatic transmission) to reverse (R)
position with the ignition switched ON
to switch the display to the rear view
monitor display.
NOTE
When the shift lever (manual
transmission) or the selector lever
(automatic transmission) is shifted
from reverse (R) position to another
shift lever (manual transmission) or the
selector lever (automatic transmission)
position, the screen returns to the
previous display.
When Driving
Rear View Monitor
4-239

▼Displayable Range on the Screen
The images on the screen may be different from the actual conditions.
1. (Screen display)
2. (Actual view)
3. Bumper
4. “Check surroundings for safety.” message is displayed
5. Object
NOTE
xThe displayable range varies depending on the vehicle and road conditions.xIf the camera lens is touched or there is any dirt on it, it could affect the screen
image. Wipe the lens using a soft cloth.
xThe displayable range is limited. Objects under the bumper or around the bumper
ends cannot be displayed.
xThe distance appearing in the displayed image is different from the actual distance
because the rear view parking camera is equipped with a specific lens.
xImages displayed on the monitor from the rear view parking camera are reversed
images (mirror images).
xSome optionally installed vehicle accessories may be picked up by the camera. Do
not install any optional parts that can interfere with the camera view, such as
illuminating parts or parts made of reflective material.
xIt may be
difficult to see the display under the following conditions, however, it
does not indicate a malfunction.
xIn darkened areas.
When Driving
Rear View Monitor
4-240

xWhen the temperature around the lens is high/low.xWhen the camera is wet such as on a rainy day or during periods of high
humidity.
xWhen foreign material such as mud is stuck around the camera.xWhen the camera lens reflects sunlight or headlight beams.xThe surroundings are illuminated by vehicle lights, fluorescent lights, or LED
lights (display may flicker).
xExtremely small dark or white dots appear on the screen (dots may flicker).xImage display may be delayed if the temperature around the camera is low.
▼Viewing the Display
Predicted vehicle path assist lines display type
The projected path guidance mode displays the predicted path of the vehicle after
you turn the steering wheel.
Use this mode for parking your vehicle in a parking space or garage.
a) Projected vehicle path (yellow)
These lines are displayed as a reference for the projected path of the vehicle.
The lines displaying the projected vehicle path change after you turn the steering
wheel.
b) Extended vehicle width lines (blue)
These lines indicate the vehicle's extended width.
These lines are not displayed when the vehicle's wheels are in the straight-ahead
position.
c) Distance guide lines (red)
These lines indicate the approximate distance to a point measured from the
vehicle's rear (from the end of the bumper).
The blue line indicates the point about 50 cm (19 in) from the rear bumper.
The red and yellow lines, which change position after you turn the steering wheel,
indicate the points about 50 cm (19 in) for the red line and 100 cm (39.3 in) for
the yellow lines from the rear bumper (at the centre point of each of the lines).
A degree of error occurs when the wheels are not in the straight-ahead position.
In the above illustration, the right side of the vehicle is in a position closer to the
actual distance displayed by the distance guide lines (red: about 50 cm (19 in)
When Driving
Rear View Monitor
4-241

point, yellow: about 100 cm (39.3 in) point behind the rear bumper), whereas
the left side is in a position farther away.
CAUTION
The indicated position of the guide lines on the display changes depending on the
vehicle conditions (such as the number of occupants/cargo load) and the road
conditions (such as a steep gradient to the rear of the vehicle).
Always check the area to the vehicle's rear and the surrounding area directly with
your eyes while backing up.
Fixed assist lines display type
Guide lines which indicate the width of the vehicle (yellow) are displayed on the
screen as a reference to the approximate width of the vehicle in comparison to the
width of the parking space you are about to back into.
Use this display view for parking your vehicle in a parking space or garage.
a) Vehicle width guide lines (yellow)
Guide lines serve as a reference to the approximate width of the vehicle.
b) Distance guide lines (red)
These guide lines indicate the approximate distance to a point measured from the
vehicle's rear (from the end of the bumper).
The red and yellow lines indicate the points about 50 cm (19 in) for the red line
and 100 cm (39.3 in) for the yellow lines from the rear bumper (at the centre
point of each of the lines).
CAUTION
The guide lines on the screen are fixed lines. They are not synced to the driver's
turning of the steering wheel. Always be careful and check the area to the vehicle's
rear and the surrounding area directly with your eyes while backing up.
▼Rear View Monitor Operation
The operation of the rear view monitor when reversing the vehicle varies depending
on the traffic, road, and vehicle conditions. The amount of steering and the timing
When Driving
Rear View Monitor
4-242