2016 TOYOTA VENZA Owners Manual

4093-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Change the incoming SMS/
MMS display. “Full Screen”: When an SMS/
MMS message is received, the
incoming SMS/MMS display
screen is displayed and can be
operated on the screen.
“Drop-Down”: When an SMS/
MMS message is received, a
message is displayed on the
upper side of the screen.
Change the incoming e-mail
display. “Full Screen”: When an e-mail is
received, the incoming e-mail dis-
play screen is the displayed and
can be operated on the screen.
“Drop-Down”: When an e-mail is
received, a message is displayed
on the upper side of the screen.
Set display of messaging
account names on the inbox
tab on/off. When set to on, messaging
account names used on the cellu-
lar phone will be displayed.
■ To return to the default settings
Select “Default”, and then “Yes”.

4103-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Displaying the “Messaging Settings ” screen in a different way
Display the phone screen. (  P. 379)
Select .
Select “Settings”.
Select “Message Settings”.
Phone Display Settings
Display the “Phone/Message Settings” screen. (  P. 397)
Select “Phone Display Settings”.
Select the desired item to be set.
Change the incoming call dis-
play. “Full Screen”: When a call is
received, the hands-free screen
is displayed and can be operated
on the screen.
“Drop-Down”: A message is dis-
played on the upper side of the
screen.
Set display of the contact/ his-
tory transfer completion mes-
sage on/off.STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
■ To return to the default settings
Select “Default”, and then “Yes”.

4113-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
What to do if... (Troubleshooting) If there is a problem with the hands-free system or a Bluetooth ®
device, first check the table below.
When using the hands-free system with a Bluetooth ®
deviceSymptom Likely cause Solution Page
Cellular
phone This
system
The hands-free
system or
Bluetooth ®

device does not
work. The connected
device may not
be a compati-
ble Bluetooth ®

cellular phone. For a list of spe-
cific devices
which opera-
tion has been
confirmed on
this system,
check with your
Toyota dealer
or the web-
site.
* 1
* 2

The Bluetooth
version of the
connected cel-
lular phone may
be older than
the specified
version. Use a cellular
phone with
Bluetooth ver-
sion 1.1 or
higher (recom-
mended:
Ver.3.0 + EDR
or higher).
* 2
P. 419

4123-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) When registering/connecting a cellular phone Symptom Likely cause Solution Page
Cellular
phone This
system
A cellular phone
cannot be regis-
tered. An incorrect
passcode was
entered on the
cellular phone. Enter the cor-
rect passcode
on the cellular
phone.
* 2

The registra-
tion operation
has not been
completed on
the cellular
phone side. Complete the
registration
operation on
the cellular
phone (approve
registration on
the phone).
* 2

Old registration
information
remains on
either this sys-
tem or the cellu-
lar phone. Delete the
existing regis-
tration informa-
tion from both
this system and
the cellular
phone, then
register the cel-
lular phone you
wish to connect
to this system.
* 2
P. 369

4133-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Symptom Likely cause Solution Page
Cellular
phone This
system
A Bluetooth ®

connection can-
not be made. Another
Bluetooth ®

device is
already con-
nected. Manually con-
nect the cellu-
lar phone you
wish to use to
this system.  P. 371
Bluetooth ®

function is not
enabled on the
cellular phone. Enable the
Bluetooth ®

function on the
cellular phone.
* 2

Automatic
Bluetooth ®
con-
nection on this
system is set to
off. Set automatic
Bluetooth ®
con-
nection on this
system to on
when the
engine switch is
turned to the
“ACC” or “ON”
position (vehi-
cles without a
smart key sys-
tem) or ACCES-
SORY or
IGNITION ON
mode (vehicles
with a smart key
system).  P. 371

4143-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) When making/receiving a call Symptom Likely cause Solution Page
Cellular
phone This
system
“Please check
your device set-
tings.” mes-
sage is
displayed. Bluetooth ®

function is not
enabled on the
cellular phone. Enable the
Bluetooth ®

function on the
cellular phone.
* 2

Old registration
information
remains on
either this sys-
tem or the cellu-
lar phone. Delete the
existing regis-
tration informa-
tion from both
this system and
the cellular
phone, then
register the cel-
lular phone you
wish to connect
to this system.
* 2
P. 369
Symptom Likely cause Solution Page
Cellular
phone This
system
A call cannot be
made/received. Your vehicle is
in a “Out of cel-
lular service
area. Please try
again later.”
area. Move to where
“Out of cellular
service area.
Please try again
later.” no longer
appears on the
display. 

4153-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features When using the contact list Symptom Likely cause Solution Page
Cellular
phone This
system
Contact data
cannot be
transferred
manually/auto-
matically. The profile ver-
sion of the con-
nected cellular
phone may not
be compatible
with transfer-
ring contact
data. For a list of spe-
cific devices
which opera-
tion has been
confirmed on
this system,
check with your
Toyota dealer
or the web-
site.
* 1
* 2

Automatic con-
tact transfer
function on this
system is set to
off. Set automatic
contact transfer
function on this
system to on.  P. 399
Passcode has
not been
entered on the
cellular phone. Enter the pass-
code on the cel-
lular phone if
requested
(default pass-
code: 1234).
* 2

Transfer opera-
tion on the cel-
lular phone has
not completed. Complete trans-
fer operation on
the cellular
phone (approve
transfer opera-
tion on the
phone)
* 2

Contact data
cannot be
edited. Automatic con-
tact transfer
function on this
system is set to
on. Set automatic
contact transfer
function on this
system to off.  P. 399

4163-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) When using the Bluetooth ®
message function (if equipped)Symptom Likely cause Solution Page
Cellular
phone This
system
Messages can-
not be viewed. Message trans-
fer is not
enabled on the
cellular phone. Enable mes-
sage transfer
on the cellular
phone (approve
message trans-
fer on the
phone).
* 2

Automatic
transfer function
on this system
is set to off. Set automatic
transfer function
on this system
to on.  P. 408
New message
notifications are
not displayed. Notification of
SMS/MMS/e-
mail reception
on this system
is set to off. Set notification
of SMS/MMS/e-
mail reception
on this system
to on.
* 2
P. 408
Automatic mes-
sage transfer
function is not
enabled on the
cellular phone. Enable auto-
matic transfer
function on the
cellular phone.
* 2
P. 408