Page 345 of 751
02-358710-01
The defogger system uses the heated glass to remove the moisture and fro\
st on the windows, which
can disturb safe driving.
The defogger (including de-icer) activates the corresponding switch an\
d the STICS controls the
operating time.Tailgate and outside rearview mirror
heated glass switch
Pressing switch activates tailgate and outside
rearview mirror heated glass for approx. 12
minutes
Windshield heated glass (de-icer) switch
Pressing switch activates windshield heated
glass for approx. 12 minutes
Page 346 of 751
02-36
▶Front Defogger TimerThe front defogger output is "ON" when turning on the front defogger switch with the engine
started (IGN ON)
The output stops when turning on the front defogger switch again during \
its operation.
The output is "ON" only for 6 minutes when turning on the front defogger\
switch within 10
minutes after completion of output for 12 minutes. This can be done only\
once.
The output is "OFF" when the ignition switch is "OFF".
1.
2.
3.
4.
Page 347 of 751
02-378710-01
▶Rear Defogger TimerThe rear defogger output is "ON" when turning on the rear defogger switch with the engine
started (IGN ON)
The output stops when turning on the rear defogger switch again during i\
ts operation.
The output is "ON" only for 6 minutes when turning on the rear defogger switch within 10 minutes
after completion of output for 12 minutes. This can be done only once.
The output is "OFF" when the ignition switch is "OFF".
1.
2.
3.
4.
Page 348 of 751
02-38
▶Door Lock/Unlock Control by Door Lock Switch
The door lock system outputs "LOCK" signal for 0.5 seconds when positioning the driver's o
r
passenger's door lock knob to the lock from unlock position.
The door lock system outputs "UNLOCK" signal fo r 0.5 seconds when positioning the driver's o
r
passenger's door lock knob to the unlock from lock position.
"LOCK" or "UNLOCK" by the door lock switch is ignored when outputting th\
e "LOCK" o
r
"UNLOCK" signal by other functions.
All door lock signals are "UNLOCK" for 0.5 seconds just for once when receiving the "LOCK"
signal within 0.5 seconds after closing the driver's or passenger's door while the ignition key is
removed.
1.
2.
3.
4.
Page 349 of 751
02-398710-01
▶Door Lock/Unlock Control by Central Door Lock Switch
When the central door lock switch is activated, LOCK/UNLOCK output is pe\
rformed.
(However, if the driver's/passenger's lock switch is previously locked, UNLOCK output is
performed and if the driver's/passenger's lock switch is unlocked, LOCK \
output is
performed.)
The input of the central door lock switch is overridden in armed mode.
1.
2.
Page 350 of 751
02-40
▶Door Lock/Unlock Control by Remote Control Key
The door lock relay output is "ON" for 0.5 seconds when receiving the lo\
ck signal from the
remote control key.
The door unlock relay output is "ON" for 0.5 seconds when receiving the unlock signal from the
remote control key.
1.
2.
Page 351 of 751

02-418710-01
The door lock system outputs "LOCK" when the vehicle speed maintains over 30 km/h.
However, it doesn't output "LOCK" when all doors are locked or failed.
If any of doors is unlocked after outputting "LOCK" in step 1, outputs "LOCK" up to 5 times
(except step (1)) at the interval of one second.
If any of doors is unlocked after 5 times of "LOCK" outputs, the door (driver's/passenger's/rear) is
regarded as "FAIL".
If the door that was regarded as fail is changed (UNLOCK to LOCK), it will be recognized as a
normal one.
If any door is regarded as FAIL, the auto door lock function does not work. (if it is occurred when
the vehicle speed is over 30 km/h, the auto door lock output does not occur even if the vehicle
speed falls below 30 km/h and accelerates again to over 30 km/h.) Nonetheless, the central
door lock function works properly.
When the system receives "UNLOCK" signal fr om a door switch, it outputs "LOCK" signals 5
times. If additional "LOCK" signal from another door switch is detected during \
the period, the
system outputs five "LOCK" signals 5 times for the switch.
The door lock system outputs "UNLOCK" automatically if the "LOCK" output conditions are
established by this function or the key is cycled (IGN=OFF) (even when there is no "LOCK"
output while the vehicle speed maintains over 30 km/h under lock conditi\
on).
(If the LOCK condition is established with the ignition switch ON, the system outputs UNLOCK
signal unconditionally when turning the ignition switch to OFF position.\
)
However, when the ignition key is turned to "OFF" position, the lock output conditions will be
cancelled.
The "FAIL" condition of the door will be erased when the ignition key is\
turned to "OFF" position.
1.
2.
3.
4.
5.
6.
7.
8.
▶Auto Door Lock
T2: 0.5 s
(*1) LOCK: Driver's & Passenger's & Rear door & = Lock
Page 352 of 751

02-42
▶Auto Door Unlock (Crash Unlock: Automatic Door Unlock in Collision)
The air bag collision signal input cannot be accepted within 7 seconds after turning the ignition
key to "ON" position.
After this period, the door lock system outputs "UNLOCK" for all doors for 5 seconds from 40 ms
after receiving the air bag collision signal.
Even though the key is turned to "OFF" position during the output of "UNLOCK", the output
continues on for remaining period.
The function is erased when turning "OFF" the ignition switch.
1.
2.
3.
4.
Cautions for door lock/unlock control
The "Unlock" control by air bag signal prevails over any "LOCK" or "UNLOCK" control by othe
r
functions.
The "LOCK/UNLOCK" request by other functions will be ignored after/durin\
g the output o
f
"UNLOCK" by the air bag.
However, the door lock is controlled by other functions when the ignitio\
n switch is "OFF".
"LOCK" (or "UNLOCK") output is ignored if "LOCK" (or "UNLOCK") output is required while
performing the output of "LOCK" (or "UNLOCK").
(However, UNLOCK by air bag signal and operation by the remote control \
key are valid.)
If the door lock system outputs "LOCK" and "UNLOCK" simultaneously, only\
the "LOCK" output
can be activated.
1.
2.
3.
4.