Page 737 of 751
03-137410-01
Seat belt reminder
2) Seat Belt Reminder & Pretensioner
In addition to securing the occupants to the seat, the seat belt has the seat belt reminder and the
pretensioner which retracts the seat belts while the air bags are deployed and the load limiter which
protects the seat belt from being retracted excessively.
Driver's seat belt reminder ▶
The STICS detects if the seat belt is fastened or not using a signal from the driver's seat belt switch. The
seat belt reminder flashes and the chime sounds when the seat belt is not fastened.
The seat belt reminder stops its operation as soon as the seat belt is fastened.
Chime
Pretensioner ▶
It is installed on the driver and passenger LH/RH B-pillar and the pretensioner is installed in it, which
retracts the seat belt when the air bag is deployed in case of the front impact to secure the occupant to
the seat.
Anchor
Pretensioner
Page 738 of 751

04-37340-00
1. SPECIFICATIONS
2. CAUTIONS WHEN WORKING
Wear clean work clothes and gloves.
Replace and wash the gloves frequently.
Any unauthorized modification or operational test is not allowed since the sunroof motor and control
unit are preset at the factory.
Take care not to drop the sunroof assembly when removing it and do not keep it right up. 1.
2.
3.
4.
Operating voltage 9 ~ 16 V
Operating current (open & close) Max. 6 A
At no load Max. 2 A
Leakage current Max. 1 mA or less
Roof motor operating speed (at opening and closing)1.2 ± 0.5 sec./100 mm
Motor overload stop conditionsCurrent for up to 26 A and torque (load)
for up to 8.3 Nm
Opening amount230 ± 3
Vertical/horizontal tolerance for sunroof glass panel± 2 mm/± 2.5 mm
3. CAUTIONS FOR OPERATION
Even though the sunroof can be operated when the engine is not running, operating the sunroof
repeatedly with the engine turned off will run down the battery. Operate the sunroof while the engine is
running.
When the sunroof operation is completed, release the switch. Keeping pressing the switch can result
in malfunction.
Especially in winter, never operate the sunroof if operation areas are iced. Wait until melted.
Make sure that the sunroof is completely closed when leaving the vehicle. Leaving the vehicle with the
sunroof open result in a theft. In addition, rain or snow can get into the vehicle through the open
sunroof.
When the sunroof is fully open, wind buffeting symptom can be worse. In this case, try to adjust the
sunroof position manually or open the sunroof until the wind buffeting is disappeared
Parts of the body can be trapped in the sunroof and can be struck by passing objects. Do not stick
hands, head or anything else out of the openings.
Remove any dirt and foreign material stuck on the edge of the sunroof glass periodically.
Noise can occur due to friction when operating the sunroof. -
-
-
-
-
-
Page 739 of 751
04-4
TILTOPEN
Sunroof switch
1. SYSTEM LAYOUT
Sunroof assemblySunroof motor &
control unit
Page 740 of 751
04-57340-00
2. OPERATING PROCESS
1) Sunroof Switch
This can be closed or open manually to block sunlight when the sunroof function is not in use. The sunroof glass can be open automatically and can be tilted by the switch operation. The sunroof switches are included in the overhead console switches and consists of the TILT,
CLOSE and OPEN switches.
CLOSE
OPEN ▷
▷
Sun shade blindSunroof glass Sunroof operation switch ▶
Closes the sunroof.
Opens the sunroof.
Sunroof glass ▶
Roller blind ▶
Page 741 of 751
04-6
2) Sunroof Sliding Opening/Closing
Opening sunroof (Sliding open) ▶
Auto open
When turing the switch to the "OPEN" position briefly, the sunroof is tilted up and opened
automatically until it stops. The sunroof operation stops if you operate the switch during its operation.
Manual open
1st step (tilt up): When making a long turn of the switch to the "OPEN" position with the sunroof
closed, it is tilted up.
2nd step (opens by itself from tilted up condition): When making a long turn of the switch to the
"OPEN" position with the sunroof tilted up, it opens only whilst turning the switch. -
-
Closing sunroof (Sliding close) ▶
Manual close
While turning the switch to the "CLOSE" position, the sunroof is closed. Release the switch at the
desired position.
Since the sunshade blind does not operate together with the sunroof, you should open and
close it manually.
Page 742 of 751
05-37710-06
1. MAJOR CHANGES
1) Front Console
Front console
- Parking brake front cover and its mounting appearances changed
- Cup holder shutter removed and cellular phone tray adopted
2) Dash Inner Insulator
Dash inner insulator
- Hole added and appearance changed
Cup holder shutterCup holder
Cellular phone tray
Parking brake
front cover
Page 743 of 751
05-4
3) Floor Mat
Floor mat
A. Hole added and appearance changed
B. Silt line added and appearance changed due to heated rear seat adoption
4) Floor Rear Insulator
Rear Front
Floor rear insulator
- Hole added and appearance changed
Rear Front
Page 744 of 751