2006 LAND ROVER FRELANDER 2 key

Publi s hed: 11-May-2011
General Information - Standard Workshop Practices
Des cript ion and Operat ion
Vehicle in Workshop
W hen working on a vehicl e in the workshop al ways make sure t hat :
W here practi cable, t he parking brake is appli ed and t he wheel s are securely chocked to prevent t he vehi cl e movingforwards or backwards .W henever pos si ble, t he ignit ion key i s removed before any work is carried out on t he vehi cle.If the engine i s t o be run, t here i s adequat e vent il ati on, or an extract ion hos e i s us ed to remove exhaus t fumes.There i s adequat e room to rais e the vehicle and remove t he wheel s , if neces s ary.Fender covers are al ways ins tal led i f any work i s to be carri ed out in t he engine compart ment.W here practi cable, t he batt ery i s dis connected if worki ng on the engi ne, underneath t he vehicle, or if t he vehi cl e i srai sed.
• CAUTIO NS:
Prior to dis connect ing the bat tery, refer to the El ect ri cal Secti on of this manual - Bat tery dis connect ion/connect ion.For addit ional informat ion, refer t o: Specificati ons (414-01 Bat t ery, Mount ing and Cables , Speci ficat ions).
W hen el ect ri c arc wel ding on a vehi cl e, al ways dis connect t he generator wi ri ng to prevent t he pos si bili ty of a s urgeof current caus i ng damage to the i nternal component s of the generat or.
If us i ng welding equipment on t he vehicle, a s uit abl e fire exti nguis her is readily avail able.
Battery - General
• CAUTIO NS:
Prior to carrying out any procedures which i nvol ve dis connect ing/ or connecti ng the bat tery, refer t o t he ElectricalSect ion of t his manual - Batt ery di sconnect ion/connect ion.For addit ional informat ion, refer t o: Specificati ons (414-01 Bat t ery, Mount ing and Cables , Speci ficat ions).
A di s charged bat tery condit ion may have been caus ed by an electrical short ci rcuit . If t his condit ion exis t s there wil lbe an apparentl y li ve circuit on the vehicle even when al l normal circuit s are s wit ched off. This can cause arcing when t hejumper cables are connect ed.
W hi le it i s not recommended that the vehicl e is jump s t art ed, i t is recognized t hat thi s may occas ionall y be t he onl ypracti cal way t o mobi lize a vehi cl e. Prior t o at tempt ing a jump s t art , reference must be made to the El ect ri cal Secti on oft hi s manual - Jump St art ing.
Followi ng jump s tart ing of a dis abl ed vehi cle, the di s charged bat tery mus t be checked for s erviceabili ty and recharged offt he vehi cl e as s oon as poss ibl e t o avoi d permanent damage.
Do not rel y on t he generator t o res t ore a di s charged bat tery. For a generat or t o recharge a batt ery, it woul d take i n exces sof eight hours cont inuous dri vi ng wi th no addi ti onal loads placed on t he batt ery.
Always make s ure that t he jumper cabl es are adequate for the tas k.Always make s ure that t he s lave batt ery i s of the same vol tage as t he vehicle bat tery. The bat teries mus t beconnected i n paral lel.Always make s ure that s wit chabl e electric circui ts are s wi tched off before connecti ng jumper cabl es. This reducest he ri sk of arci ng occurring when the final connecti on is made.
Towing the Vehicle
W ARNING: W hen t owing i s neces sary, reference mus t be made to the Jacki ng, Lift ing and Towing Secti on of thi sManual .
W hen t he vehicle i s being t owed dock the remote cont rol and s wit ch on the ignit ion. (s t eering l ock releas ed and warni ngli ght s i ll uminated). Onl y t hen wil l the s t eering, turn s ignal lamps , horn and s t op lamps be operat ional. Fail ure t o followt hes e i nst ructi ons may res ult in pers onal injury. It mus t be noted that wit h t he engine not running, t he power s t eering andbrake boost er wil l be inoperat ive t herefore, great er effort wil l be needed t o s t eer t he vehicle and apply the brakes .
General Installation Instructions
Component removal
W henever pos si ble, clean component s and the surroundi ng area before removal .
Blank off openings expos ed by component removal .Followi ng dis connecti on, s eal fuel, oil or hydrauli c li nes i mmediat ely us ing sui table bl anki ng plugs or caps .Seal open ends of expos ed oil ways us i ng sui table tapered hardwood pl ugs or cons pi cuous pl as t ic pl ugs .Immediat el y a component i s removed, place it i n a sui table contai ner; us e a s eparate cont ai ner for each componentand it s as s ociat ed part s .

Woodruff keys
W oodruff keys may be reus ed provided t here i s no i ndi cat ion of wear or dis torti on.
Remove any burrs from edges of keyways us ing a fine fil e.
Split pins
Never at tempt t o s t raight en and reus e a s pli t pin, always make s ure that repl acement pins are of the correct si ze for t hehole i n which t hey are to be ins tal led.
Screw Threads
Damaged nuts , bolt s and s crews mus t always be dis carded. Att empti ng to recut or repai r damaged threads wi th at ap or di e i mpai rs the s t rength and fi t of t he t hreads and is not recommended.
• NOTE: Duri ng cert ai n repai r operat ions , it may be neces sary t o remove t races of t hread locking agent s us ing a tap.W here thi s is neces sary, t he i ns t ructi on to do s o wi ll appear in the relevant operation and it i s ess enti al that a t ap of thecorrect s ize and t hread i s used.
Some bolt s are coat ed wit h a thread locki ng agent and unles s s tat ed otherwis e, they mus t not be reus ed. Newbolt s havi ng the same part number as the original mus t always be i nst all ed. W hen nuts or bolt s are to bedis carded, t he repai r operat ion and relevant torque chart will i ncl ude an ins truct ion to that effect . Do not usepropri etary thread locki ng agent s as t hey may not meet the specificati on required. See al so Encapsul at ed('Patched') Bol ts and Screws.Always make s ure that repl acement nuts and bol ts are at leas t equal i n s trengt h t o thos e t hat they are repl acing.Cast ell ated nut s mus t not be loosened t o accept a s pli t pin except in recommended cas es when thi s forms part ofan adjus tment .Do not all ow oil or greas e t o enter bli nd holes , the hydrauli c acti on res ult ing from ti ght ening t he bolt or s tud cans plit t he housi ng and als o gi ve a fal s e torque reading.Always t ighten a nut, bolt or s crew to t he s peci fi ed torque fi gure, damaged or corroded threads can give a fals et orque reading.Nut and bolt loos ening and t ightening sequences , where gi ven, mus t ALW AY S be foll owed. Di st ort ion ofcomponents or fault y s eal ing of joints wil l res ul t if t he s equences are not fol lowed. W here an ins t ructi on is gi ven tot ighten i n s tages , thes e s tages mus t be adhered t o; do not at t empt to combi ne st ages part icul arl y where cert ains tages involve t ight eni ng by degrees.To check or re-t ighten a fi xing t o a s peci fi ed t orque, firs t loosen a quart er of a turn, t hen ret ighten to the s peci fi edt orque fi gure.Unles s ins t ructed ot herwis e, do not lubricat e bolt or nut t hreads pri or t o i nst all ing.
W here it i s s tat ed t hat bolt s and s crews may be reus ed, t he fol lowi ng procedures must be carri ed out:
Check t hat threads are undamaged.Remove all t races of locki ng agent from the threads .
CAUTION: DO NOT us e a wi re brus h; take care t hat threads are not damaged.
Make s ure t hat threads are clean and free from oil or greas e.Apply t he s pecified locki ng agent t o t he bolt t hreads .
Bolt and Nut Identification
An ISO met ri c bolt or s crew made of s t eel and l arger than 6 mm in di ameter can be identi fi ed by eit her of t he s ymbols ISOM or M emboss ed or i ndent ed on top of t he bolt head.
In addi ti on t o marks i dent ifying t he manufacturer, t he top of t he bolt head is als o marked wit h s ymbol s indi cat ing t hes trengt h grade e.g. 8.8, 10.9, 12.9, 14.9. Alt ernati vel y, some bol ts and screws have t he M and s trengt h grade s ymbols tamped on the flat s of the hexagon.
Encapsulated ('Patched') bolts and screws

DT CDescriptionPossible CauseAction
B10AD-04Rain Sens or - Sys t emInt ernal FailureInternal s ens or fail ureIns t al l a new rain s ens or, refer to newmodule/component i nst all at ion not e at t he top of t heDTC Index
B10AD-09Rain Sens or -Component Fail uresRai n s ens or incorrect lyi nst all edRai n s ens or int ernal fail ure
Check for correct ins tal lati on of rai n s ens or. Ins tall anew s ens or as requi red, refer t o newmodule/component i nst all at ion not e at t he top of t heDTC Index
B10BE-11Solar Sens or - circui ts hort t o groundSunload s ens or circui t -s hort t o groundRefer to electrical ci rcuit diagrams and check s unl oads ens or for s hort t o ground
B10BE-13Solar Sens or - opencircui tSunload s ens or circui t -open circui tRefer to electrical ci rcuit diagrams and check s unl oads ens or for open circuit
B10C0-12Fuel Pump PowerSuppl y - circui t shortt o power
Fuel pump power supplyci rcuit - s hort t o powerRefer to electrical ci rcuit diagrams and check fuel pumppower s upply circui t for s hort t o power
B10C0-14Fuel Pump PowerSuppl y - circui t shortt o ground or open
Fuel pump power supplyci rcuit - s hort t o ground,open circui t
Refer to electrical ci rcuit diagrams and check fuel pumppower s upply circui t for s hort t o ground, open ci rcuit
B10D7-94PATS Key -unexpected operat ionNo res pons e fromt rans ponder i n keyRepl ace key
B10E5-11PCM wake-up si gnal -circui t short to groundEngine Cont rol Module(ECM) wake-up s ignalci rcuit - s hort t o ground
Refer to electrical ci rcuit diagrams and check ECMwake-up s ignal ci rcuit for short to ground
B10E5-15PCM wake-up si gnal -circui t short to poweror open
Engine Cont rol Module(ECM) wake-up s ignalci rcuit - s hort t o power,open circui t
Refer to electrical ci rcuit diagrams and check ECMwake-up s ignal ci rcuit for short to power, open circui t
B10E7-12Igni ti on On Relay -circui t short to powerEJB i gni ti on On relaycontrol ci rcuit - s hort t opower
Refer to electrical ci rcuit diagrams and check EJBignit ion relay control ci rcuit for s hort t o power
B10E7-14Igni ti on On Relay -circui t short to groundor open
EJB i gni ti on On relaycontrol ci rcuit - s hort t oground, open circuit
Refer to electrical ci rcuit diagrams and check EJBignit ion relay control ci rcuit for s hort t o ground, openci rcuit
B10EA-12Posi ti ve t emperaturecoeffi ci ent heat er -circui t short to power
Pos it ive t emperat urecoefficient heater circuit -s hort t o power
Refer to electrical ci rcuit diagrams and check posi ti vetemperat ure coeffici ent heater circui t for s hort t o power
B10EA-14Posi ti ve t emperaturecoeffi ci ent heat er -circui t short to groundor open
Pos it ive t emperat urecoefficient heater circuit -s hort t o ground, openci rcuit
Refer to electrical ci rcuit diagrams and check posi ti vetemperat ure coeffici ent heater circui t for s hort t oground, open circui t
B10EB-77Driver door doubl elocking mot or -commanded pos i ti onnot reachabl e
Incorrect feedback fromDDMCheck for Los t Communicati ons DTCs and carry outass ociated pi npoi nt tes t us ing manufacturer approveddiagnos t ic s ys tem. If no los t communicati on DTC, checkdoubl e locking mechani s m for mechanical fail ureB10EC-77Pass enger doordoubl e l ocking mot or- commanded pos i ti onnot reachabl e
Incorrect feedback fromPDMCheck for Los t Communicati ons DTCs and carry outass ociated pi npoi nt tes t us ing manufacturer approveddiagnos t ic s ys tem. If no los t communicati on DTC, checkdoubl e locking mechani s m for mechanical fail ureB10ED-77Rear door dri ver s i dedoubl e l ocking mot or- commanded pos i ti onnot reachabl e
Incorrect feedback fromrear door dri ver s i deCheck DDM for Los t Communicat ions DTCs and carryout as s oci ated pi npoi nt t es t usi ng manufacturerapproved di agnos ti c s yst em. If no los t communi cat ionDTC, Carry out t he pinpoint t est s as sociat ed t o thi sDTC us ing t he manufacturer approved diagnos ti cs ys t em, check doubl e locking mechanis m formechanical fai lure
B10EE-77Rear door pas sengers ide double l ocki ngmot or - commandedposi ti on notreachabl e
Incorrect feedback fromrear door pas senger si deCheck PDM for Lost Communi cat ions DTCs and carry outass ociated pi npoi nt tes t us ing manufacturer approveddiagnos t ic s ys tem. If no los t communicati on DTC, Carryout the pi npoint t es ts as s oci at ed t o t his DTC us ing themanufacturer approved diagnost ic sys tem, check doublelocki ng mechani sm for mechanical fail ureB10EF-12Sunroof Speed Out put- circui t short topower
Sunroof s peed out putci rcuit - s hort t o powerRefer to electrical ci rcuit diagrams and check s unroofs peed out put circui t for s hort t o power
B10EF-14Sunroof Speed Out put- circui t short toground or open
Sunroof s peed out putci rcuit - s hort t o ground,open circui t
Refer to electrical ci rcuit diagrams and check s unroofs peed out put circui t for s hort t o ground, open ci rcuit
B10F2-12Sunroof cont rol -circui t short to powerSunroof cont rol circui t -s hort t o powerRefer to electrical ci rcuit diagrams and check s unroofcont rol circuit for s hort to power

DT CDescriptionPossible CauseAction
B1D17-88Batt ery BackedSounder - bus offLos t communicat ions wi thbat tery backed s ounderCarry out the net work t est as s oci ated wi th thi s DTCusi ng t he manufact urer approved diagnost ic s ys tem
B1D17-96Batt ery BackedSounder - componentint ernal fai lure
Bat tery backed s ounder -i nternal failureIns t al l a new bat tery backed s ounder, refer t o newmodule/component i nst all at ion not e at t he top of t heDTC IndexB1D18-96Volumet ri c Sens orCircui t - componentint ernal fai lure
Interior mot ion s ensor -i nternal failureIns t al l a new i nteri or moti on s ens or, refer t o newmodule/component i nst all at ion not e at t he top of t heDTC Index
B1D21-62Remote Cont rolSwit ch - Signalcompare failure
A request from aprogrammed remote keywas recei ved and theroll ing count er wasi ncorrect
Re-s ynchroni se the remote key by us i ng the key t os tart the vehicle
B1C55-12Horn Rel ay CoilCircui t - circuit shortt o power
Horn rel ay cont rol circui t -s hort t o powerRefer to electrical ci rcuit diagrams and check horn relaycont rol circuit for s hort to power
B1C55-14Horn Rel ay CoilCircui t- ci rcuit s hortt o ground or open
Horn rel ay cont rol circui t -s hort t o ground, openci rcuit
Refer to electrical ci rcuit diagrams and check horn relaycont rol circuit for s hort to ground, open circui t
B1C82-12Headlamp W asherRelay Coil Ci rcuit -circui t short to power
Headlamp washer rel aycontrol ci rcuit - s hort t opower
Refer to electrical ci rcuit diagrams and check headl ampwasher rel ay cont rol circui t for s hort t o power
B1C82-14Headlamp W asherRelay Coil Ci rcuit -circui t short to groundor open
Headlamp washer rel aycontrol ci rcuit - s hort t oground, open circuit
Refer to electrical ci rcuit diagrams and check headl ampwasher rel ay cont rol circui t for s hort t o ground, openci rcuit
B1C84-12Heated Rear W i ndowRelay Out put Ci rcuit -circui t short to power
Heat ed rear wi ndow relaycontrol ci rcuit - s hort t opower
Refer to electrical ci rcuit diagrams and check heatedrear window relay control ci rcuit for s hort t o power
B1C84-14Heated Rear W i ndowRelay Out put Ci rcuit -circui t short to groundor open
Heat ed rear wi ndow relaycontrol ci rcuit - s hort t oground, open circuit
Refer to electrical ci rcuit diagrams and check heatedrear window relay control ci rcuit for s hort t o ground,open ci rcuit
B1C90-12Auxili ary DrivingLamps Relay CoilCircui t - circuit shortt o power
Auxil iary dri vi ng lampsrelay control ci rcuit - s hortt o power
Refer to electrical ci rcuit diagrams and check auxi li arydri vi ng lamps relay control ci rcuit for s hort t o power
B1C90-14Auxili ary DrivingLamps Relay CoilCircui t - circuit shortt o ground or open
Auxil iary dri vi ng lampsrelay control ci rcuit - s hortt o ground, open circuit
Refer to electrical ci rcuit diagrams and check auxi li arydri vi ng lamps relay control ci rcuit for s hort t o ground,open ci rcuit
B1D13-12Int eri or Li ght s #1Circui t - circuit shortt o power
Ins trument panel int eriorl ight s ci rcuit - s hort t opower
Refer to electrical ci rcuit diagrams and checkins trument panel int eri or l ights ci rcuit for short topower
B1D13-14Int eri or Li ght s #1Circui t - circuit shortt o ground or open
Ins trument panel int eriorl ight s ci rcuit - s hort t oground, open circuit
Refer to electrical ci rcuit diagrams and checkins trument panel int eri or l ights ci rcuit for short toground, open circui t
B1D1A-12Int eri or Li ght s Ci rcuit'C' - circui t s hort topower
Roof cons ole int erior l ightsci rcuit - s hort t o powerRefer to electrical ci rcuit diagrams and check roof panelint erior l ights ci rcuit for s hort t o power
B1D1A-14Int eri or Li ght s Ci rcuit'C' - circui t s hort toground or open
Roof cons ole int erior l ightsci rcuit - s hort t o ground,open circui t
Refer to electrical ci rcuit diagrams and check roof panelint erior l ights ci rcuit for s hort t o ground, open circuit
B1D35-24Hazard Swi tch -Signal st uck highHazard swit ch is acti vemore t han 60 s econdsCarry out the pi npoint t es ts as s oci at ed t o t his DTCusi ng t he manufact urer approved diagnost ic s ys tem
C0023-11Stop Lamp Cont rol -circui t short to groundSt op lamp cont rol circui t -s hort t o groundRefer to electrical ci rcuit diagrams and check s top lampcont rol circuit for s hort to ground
C0023-13Stop Lamp Cont rol -circui t openSt op lamp cont rol circui t -open circui tRefer to electrical ci rcuit diagrams and check s top lampcont rol circuit for open ci rcuit
C1108-11Pedal Sens or(s )Suppl y Volt age -circui t short to ground
Pedal sens or(s ) supplyvolt age circui t - short toground
Refer to electrical ci rcuit diagrams and check pedals ens or(s ) supply vol tage circui t for s hort t o ground
C1108-15Pedal Sens or(s )Suppl y Volt age -circui t short to poweror open
Pedal sens or(s ) supplyvolt age circui t - short topower, open circui t
Refer to electrical ci rcuit diagrams and check pedals ens or(s ) supply vol tage circui t for s hort t o power,open ci rcuit
C1A41-21Clut ch Pedal Sensor -s ignal amplit ude s i gnal <3% of s uppl y(5V)Carry out the pi npoint t es ts as s oci at ed t o t his DTCusi ng t he manufact urer approved diagnost ic s ys tem

DT CDescriptionPossible CauseAction
tank unit ci rcuit (Fuel eject s ens or) for s hort to ground.Us ing t he manufacturer approved diagnost ic sys temcheck and ins t al l lat es t relevant l evel of s oft ware t othe central juncti on box and the i nst rument panelcl ust er. If t he level of s oft ware is correct carry out abat t ery resetP1674-00Control ModuleSoft ware Corrupt edA s oft ware as s ert ion fai ledwit hi n t he moduleLoad the l ates t rel evant level of s oftware usi ng t hemanufacturer approved diagnost ic sys tem
U0001-00High Speed CANCommunicati on BusBus O ffCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0010-00Medium Speed CANCommunicati on BusBus O ffCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0100-00Lost Communi cat ionW i th ECM/PCM 'A'Los t communicat ion wit hECMCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0101-00Lost Communi cat ionwi th TCMLos t communicat ion wit hTCMCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0104-00Lost Communi cat ionW i th Speed Cont rolModule
Los t communicat ion wit hs peed cont rol moduleCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0126-00Lost Communi cat ionW i th Steeri ng AngleSensor Module
Los t communicat ion wit hs t eering angle s ens orCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0129-00Lost Communi cat ionW i th Brake Syst emControl Module
Los t communicat ion wit hABS modul eCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0135-00Lost Communi cat ionW i th Different ialControl Module -Front
Los t communicat ion wit hdi fferenti al control modul eCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0155-00Lost Communi cat ionW i th Ins t rumentPanel Cl us t er (IPC)Control Module
Los t communicat ion wit hi nst rument clus t erCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0156-00Lost Communi cat ionW i th Informat ionCenter "A"
Los t communicat ion wit hi nformati on cent erCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0159-00Lost Communi cat ionW i th Parking As s is tControl Module "A"
Los t communicat ion wit hparki ng aid modul eCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0164-00Lost Communi cat ionW i th HVAC ControlModule
Los t communicat ion wit hcl imat e cont rol moduleCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0166-00Lost Communi cat ionW i th Auxi li ary HeaterControl Module
Los t communicat ion wit hauxil iary heat er cont rolmodul e
Carry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0181-00Lost Communi cat ionW i th Headl ampLevel ling Cont rolModule
Los t communicat ion wit hheadlamp Levell ing controlmodul e
Carry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0199-00Lost Communi cat ionW i th "Door ControlModule A"
Los t communicat ion wit hDriver Door Modul e (DDM)Carry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0200-00Lost Communi cat ionW i th "Door ControlModule B"
Los t communicat ion wit hPas s enger Door Modul e(PDM)
Carry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0208-00Lost Communi cat ionW i th "Seat ControlModule A"
Los t communicat ion wit hPas s enger Seat Modul e(PSM)
Carry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0214-00Lost Communi cat ionW i th Remote Functi onActuati on
Los t communicat ion wit hRemot e Keyles s Entrymodul e
Carry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0231-00Lost Communi cat ionW i th Rain Sens ingModule
Los t communicat ion wit hrain sens ing moduleCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0236-00Lost Communi cat ionW i th Column LockModule
Los t communicat ion wit hs t eering column lockmodul e
Carry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0252-00Lost Communi cat ionW i th Lighti ng Cont rolModule - Rear 'B'
Los t communicat ion wit ht rai ler moduleCarry out the as s oci at ed network t es t for this DTCusi ng t he manufact urer approved diagnost ic s ys tem
U0301-00Soft wareIncompati bil it y wit hECM/PCM
ECM dis connect edIncorrect ECM i nst all edCheck el ect ri cal connecti ons to ECM. Check correct ECMis i nst all ed

DT CDescriptionPossible CauseAction
U0401-00Invali d Dat a Recei vedFrom ECM/PCMInval id dat a received fromECMCheck ECM for DTCs and refer to DTC Index
U0405-00Invali d Dat a Recei vedFrom Crui se Cont rolModule
Inval id dat a received froms peed cont rol moduleCheck s peed cont rol module for DTCs and refer to DTCIndex
U0515-00Invali d data receivedfrom remot e functi onactuati on
Inval id dat a received fromkeyles s entry moduleCheck keyles s entry module for DTCs and refer t o DTCIndex. Carry out t he pinpoint t est s as s ociat ed t o t hi sDTC us ing t he manufacturer approved diagnos ti cs ys t emU2005-62Vehicle Speed -Signal compare fai lureVehicl e Speed - Si gnalcompare fail ureCheck ABS for DTCs and refer t o DTC Index
U2010-11Swit ch Illumi nati on -circui t short to groundSwi tch i ll uminati on circuit -s hort t o groundRefer to electrical ci rcuit diagrams and check s wit chil lumi nat ion circui t for s hort t o ground
U2010-15Swit ch Illumi nati on -circui t short to poweror open
Swi tch i ll uminati on circuit -s hort t o power, openci rcuit
Refer to electrical ci rcuit diagrams and check s wit chil lumi nat ion circui t for s hort t o power, open circui t
U2017-41Control ModuleSoft ware #2 - generalchecks um fai lure
Si gnal configurat ionchecks um not correctIns t al l lat es t relevant l evel of s oft ware us ing t hemanufacturer approved diagnost ic sys tem
U2018-41Control ModuleSoft ware #3 - generalchecks um fai lure
Local confi gurati onchecks um not correctIns t al l lat es t relevant l evel of s oft ware us ing t hemanufacturer approved diagnost ic sys tem
U2101-00Control ModuleConfi gurati onIncompati ble
Each funct ion reports i f acar configurat ionparameter has a value t hati s unknown
Check and reload Car Configurat ion Fi le
U3000-51Control Module - notprogrammedCar config or Local confi gor Si gnal config is notl oaded
Ins t al l lat es t relevant l evel of s oft ware us ing t hemanufacturer approved diagnost ic sys tem
U3003-16Batt ery Vol tageCi rcuit volt age belowt hres holdCarry out the pi npoint t es ts as s oci at ed t o t his DTCusi ng t he manufact urer approved diagnost ic s ys tem
U3003-17Batt ery Vol tageCi rcuit volt age abovet hres holdCarry out the pi npoint t es ts as s oci at ed t o t his DTCusi ng t he manufact urer approved diagnost ic s ys tem

B117E-07Front PowerW i ndow upMechanicalfai lureCheck for mechani cal fai lure of front window mechani sm
B117E-72Front PowerW i ndow upAct uator s tuckopenClear DTC and re-t est . If DTC ret urns , ins tal l a new DDM/PDM, refer t ot he new module ins tall ati on note at t he t op of the DTC Index
B117E-73Front PowerW i ndow upAct uator s tuckclos edClear DTC and re-t est . If DTC ret urns , ins tal l a new DDM/PDM, refer t ot he new module ins tall ati on note at t he t op of the DTC Index
B117F-72Front PowerW i ndow downAct uator s tuckopenClear DTC and re-t est . If DTC ret urns , ins tal l a new DDM/PDM, refer t ot he new module ins tall ati on note at t he t op of the DTC Index
B117F-73Front PowerW i ndow downAct uator s tuckclos edClear DTC and re-t est . If DTC ret urns , ins tal l a new DDM/PDM, refer t ot he new module ins tall ati on note at t he t op of the DTC Index
B11D1-83LIN Bus Circui t"C"Value of s ignalprot ect ioncal cul ati onincorrect
Refer t o t he electrical ci rcuit diagrams and tes t LIN circuit bet weendri ver s wi tch pack and DDM for s hort/open ci rcuit s , cl ear DTC andre-t es t . If DTC remains ins tall a new s wit ch pack, refer t o newmodule/component ins tal lati on note at t he t op of the DTC Index
B11D1-86LIN Bus Circui t"C"Signal InvalidRefer t o t he electrical ci rcuit diagrams and tes t LIN circuit bet weendri ver s wi tch pack and DDM for s hort/open ci rcuit s , cl ear DTC andre-t es t . If DTC remains ins tall a new s wit ch pack, refer t o newmodule/component ins tal lati on note at t he t op of the DTC Index
B11D1-87LIN Bus Circui t"C"Mis s ing Mes s ageRefer t o t he electrical ci rcuit diagrams and tes t LIN circuit bet weendri ver s wi tch pack and DDM for s hort/open ci rcuit s , cl ear DTC andre-t es t . If DTC remains ins tall a new s wit ch pack, refer t o newmodule/component ins tal lati on note at t he t op of the DTC Index
B11F6-11Dri ver Foldi ngMirror Mot orShort To GroundRefer t o electrical ci rcuit di agrams and check driver foldi ng mi rrormot or for s hort t o ground
B11F6-15Dri ver Foldi ngMirror Mot orShort t o poweror openRefer t o electrical ci rcuit di agrams and check driver foldi ng mi rrormot or for s hort t o power, open ci rcuit
B11F7-11Pass engerFolding Mi rrorMotor
Short To GroundRefer t o electrical ci rcuit di agrams and check pas s enger fol di ng mi rrormot or for s hort t o ground
B11F7-15Pass engerFolding Mi rrorMotor
Short t o poweror openRefer t o electrical ci rcuit di agrams and check pas s enger fol di ng mi rrormot or for s hort t o power, open ci rcuit
B1A98-83LIN Bus Circui t#1Value of s ignalprot ect ioncal cul ati onincorrect
Carry out the pi npoi nt tes t as sociat ed wit h t his DTC us i ng themanufacturer approved di agnos ti c s ys t em. Refer to the el ect ri cal circui tdiagrams and tes t LIN circuit bet ween dri ver s ide rear door module andDDM for s hort /open circuit s , cl ear DTC and re-tes t. If DTC remainsi ns t all a new s wi tch pack, refer t o new module/component ins tal lati onnote at the t op of t he DTC Index
B1A98-86LIN Bus Circui t#1Signal InvalidRefer t o t he electrical ci rcuit diagrams and tes t LIN circuit bet weendri ver s i de rear door modul e and DDM for s hort/open ci rcuit s , cl ear DTCand re-t es t . If DTC remains ins tall a new s wit ch pack, refer t o newmodule/component ins tal lati on note at t he t op of the DTC Index
B1A98-87LIN Bus Circui t#1Mis s ing Mes s ageRefer t o t he electrical ci rcuit diagrams and tes t LIN circuit bet weendri ver s i de rear door modul e and DDM for s hort/open ci rcuit s , cl ear DTCand re-t es t . If DTC remains ins tall a new s wit ch pack, refer t o newmodule/component ins tal lati on note at t he t op of the DTC IndexB1C39-29Key Lock Swi tchSignal inval idCarry out the as s oci ated pi npoi nt tes ts as s oci ated wi th thi s DTC us ingt he manufacturer approved diagnost ic sys temC1B15-11Sens or Suppl y#2Short t o groundRefer t o t he electrical ci rcuit diagrams and tes t rear wi ndow s ens ors uppl y circui t for s hort t o ground
C1B15-15Sens or Suppl y#2Short t o poweror open ci rcuitRefer t o t he electrical ci rcuit diagrams and tes t rear wi ndow s ens ors uppl y circui t for s hort t o power or open circui t
U2004-24Auxi li ary Swi tchPackSignal st uck hi ghCarry out the pi npoi nt tes ts ass ociated wit h t hi s DTC us ing t hemanufacturer approved di agnos ti c s ys t em
Driver/Passenger door module (DDM/PDM)DT CDescriptionPossible CauseAction
B109C-15Front Court es y Li ghtShort to power or open circuitRefer t o t he electrical ci rcuit diagrams and tes tfront courtes y li ght ci rcuit for short to power oropen circuit
B109D-11Front Court es y Li ghtShort to groundRefer t o t he electrical ci rcuit diagrams and tes tfront courtes y li ght ci rcuit for short ground
B10EB-11Dri ver door doubl elocking mot orShort to groundRefer t o t he electrical ci rcuit diagrams and tes tdri ver door doubl e locking mot or ci rcuit for shortground
B10EB-15Dri ver door doubl elocking mot orShort to power or open circuitRefer t o t he electrical ci rcuit diagrams and tes tdri ver door doubl e locking mot or ci rcuit for short topower or open circui tB10EC-11Pass enger doordoubl e locking mot orShort to groundRefer t o t he electrical ci rcuit diagrams and tes tpass enger door doubl e l ocking mot or circuit fors hort ground
B10EC-15Pass enger doordoubl e locking mot orShort to power or open circuitRefer t o t he electrical ci rcuit diagrams and tes tpass enger door doubl e l ocking mot or circuit fors hort t o power or open circui t

DT CDescriptionPossible CauseAction
U0193-00Lost communi cat ionswi th di git al audiocont rol module 'A'
Los t communicat ionsCarry out pi npoi nt tes ts as s oci ated wit h thi s DTCusi ng t he manufact urer approved diagnost ics ys t em
U0197-00Lost communi cat ionswi th t elephone cont rolmodule
Los t communicat ionsCarry out pi npoi nt tes ts as s oci ated wit h thi s DTCusi ng t he manufact urer approved diagnost ics ys t emU0199-00Lost communi cat ionswi th DDMLos t communicat ionsCarry out MOST Network int egrit y t est s us ingmanufacturer approved diagnost ic sys tem. CheckDDM for DTCs and refer t o relevant DTC Indexbel ow
U0200-00Lost communi cat ionswi th PDMLos t communicat ionsCarry out MOST Network int egrit y t est s us ingmanufacturer approved diagnost ic sys tem. CheckPDM for DTCs and refer t o rel evant DTC Indexbel ow
U0214-00Lost communi cat ionswi th remote functi onactuati on
Los t communicat ionsCarry out CAN Network int egrit y t est s us ingmanufacturer approved diagnost ic sys tem. Checkremot e keyl ess ent ry modul e for DTCs and referto relevant DTC Index below
U0245-00Lost communi cat ionswi th ent ert ai nmentcont rol module - front
Los t communicat ionsCarry out MOST Network int egrit y t est s GO toPinpoint Test ??. . Check for addi ti onal DTCs andrefer t o relevant DTC Index
U0256-00Lost communi cat ionswi th front control sint erface modul e
Los t communicat ionsCarry out MOST Network int egrit y t est s GO toPinpoint Test ??. . Check for addi ti onal DTCs andrefer t o relevant DTC IndexU0257-00Lost communi cat ionswi th frontcont rol s/dis playint erface modul e
Los t communicat ionsCarry out MOST Network int egrit y t est s GO toPinpoint Test ??. . Check for addi ti onal DTCs andrefer t o relevant DTC Index
U0300-00Int ernal cont rol modules oft wareincompati bili ty
Incorrect s oft wareCheck s oft ware level i s correct t o hardware level
U0300-51Int ernal cont rol modules oft wareincompati bili ty
Not programmedDownload t he correct level of s oft ware usi ng t hemanufacturer approved diagnost ic sys tem
U3000-55Control modul eIncorrect car confi gurati on datarecei vedCheck/up-dat e Car Configurat ion Fi le us i ngmanufacturer approved diagnost ic sys tem
U3000-87Control modul eMis si ng mes s ageCheck CJB for DTCs and refer t o DTC Index.For addit ional informati on, refer t o:Communicati ons Net work (418-00 ModuleCommunicati ons Net work, Di agnos is andTes t ing).Check i nformat ion and ent ert ainment module forCar Configurat ion Fil e and MOST net work DTCsand refer t o relevant DTC Index. Carry outMOST/CAN net work t es ts us ing the manufact urerapproved di agnos ti c s yst emU3002-81Vehicle Identi ficat ionNumberIncorrect VIN s tored andl ocked (module previ ous l yi nst all ed to other vehi cl e)
Ens ure correct component is ins tall ed t o vehi cl e
U3003-62Batt ery vol tageMis -mat ch in bat t ery volt age,of 2 vol ts or more, bet weeni nformati on and ent ert ainmentcontrol modul e and CJB
Carry out pi npoi nt tes ts as s oci ated wit h thi s DTCusi ng t he manufact urer approved diagnost ics ys t em