2006 DODGE RAM SRT-10 ABS

INSTALLATION
REGULAR CAB
1. Route the seat belt (1) through the slot in the lower
B-pillar trim panel (3) and position the trim panel to
the B-pillar (4).
2. Engage the retaining tabs that secure the lower
B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt to the
bottom of the B-pillar. Tighten the bolt to 40 Nꞏm
(30 ft. lbs.).
4. Install the upper B-pillar trim panel (Refer to 23 -
BODY/INTERIOR/B-PILLAR UPPER TRIM -
INSTALLATION).
5. Install the cowl trim panel (Refer to 23 - BODY/IN-
TERIOR/COWL TRIM - INSTALLATION).
QUAD CAB
1. Route the seat belt (3) through the slot in the lower
B-pillar trim panel (1) and position the trim panel to
the B-pillar (2).
2. Engage the retaining tabs that secure the lower
B-pillar trim panel to the B-pillar.
3. Install the upper B-pillar trim panel (Refer to 23 -
BODY/INTERIOR/B-PILLAR UPPER TRIM -
INSTALLATION).
4. Install the rear door sill trim cover (Refer to 23 -
BODY/INTERIOR/DOOR SILL TRIM COVER -
INSTALLATION).
5. Install the cowl trim panel (Refer to 23 - BODY/IN-
TERIOR/COWL TRIM - INSTALLATION).

B-PILLAR UPPER TRIM
REMOVAL
REGULAR CAB
1. Remove the cap (1) and then the bolt (2) that
secures the seat belt (3) to the top of the B-pillar
(4) and position the seat belt out of the way.
2. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the upper B-pillar trim
panel (5) to the B-pillar and remove the trim panel.
QUAD CAB
1. Using a small flat-bladed tool, carefully open the
two fastener covers (2) located on the grab handle
(1).
2. Remove the two bolts (3) that secure the grab han-
dle to the B-pillar and remove the grab handle.

3. Remove the cap (1) and the bolt (2) that secures
the seat belt (3) to the top of the B-pillar (4) and
position the seat belt out of the way.
4. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the upper B-pillar trim
panel (5) to the B-pillar and remove the trim panel.
INSTALLATION
REGULAR CAB
1. Position the upper B-pillar trim panel (5) to the
B-pillar (4).
2. Engage the retaining tabs that secure the upper
B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt (3) to
the top of the B-pillar. Tighten the bolt to 40 Nꞏm
(30 ft. lbs.).
4. Install the cap (1) onto the seat belt.

QUAD CAB
1. Position the upper B-pillar trim panel (5) to the
B-pillar (4).
2. Engage the retaining tabs that secure the upper
B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt (3) to
the top of the B-pillar. Tighten the bolt to 40 Nꞏm
(30 ft. lbs.).
4. Install the cap (1) onto the seat belt.
5. Install the grab handle (1) onto the B-pillar and
install the two bolts (3). Tighten the bolts to 6 Nꞏm
(55 in. lbs.).
6. Close the two fastener covers (2) located on the
grab handle.

C-PILLAR LOWER TRIM
REMOVAL
1. Remove the upper C-pillar trim panel (Refer to 23 -
BODY/INTERIOR/C-PILLAR TRIM - REMOVAL).
2. Remove the bolt (3) that secures the seat belt (2)
to the bottom of the C-pillar (4) and position the
seat belt out of the way.
3. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the lower C-pillar trim
panel (1) to the C-pillar.
4. Remove the seat belt from the lower C-pillar trim
panel through the slot provided and remove the
trim panel.
INSTALLATION
1. Route the seat belt (2) through the slot in the lower
C-pillar trim panel (1) and position the trim panel to
the C-pillar (4).
2. Engage the retaining tabs that secure the lower
C-pillar trim panel to the C-pillar.
3. Install the bolt (3) that secures the seat belt to the
bottom of the C-pillar. Tighten the bolt to 40 Nꞏm
(30 ft. lbs.).
4. Install the upper C-pillar trim panel (Refer to 23 -
BODY/INTERIOR/C-PILLAR UPPER TRIM -
INSTALLATION).

C-PILLAR UPPER TRIM
REMOVAL
1. Remove the cap (1) and then the bolt (2) that
secures the seat belt (3) to the top of the C-pillar
(4) and position the seat belt out of the way.
2. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the upper C-pillar
trim panel (5) to the C-pillar and remove the trim
panel.
INSTALLATION
1. Position the upper C-pillar trim panel (5) to the
C-pillar (4).
2. Engage the retaining tabs that secure the upper
C-pillar trim panel to the C-pillar.
3. Install the bolt (2) that secures the seat belt (3) to
the top of the C-pillar. Tighten the bolt to 40 Nꞏm
(30 ft. lbs.).
4. Install the cap (1) onto the seat belt.

COWL TRIM
REMOVAL
1. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs of the cowl trim panel (1) from
the retainer clips (2) in the door sill (3).
2. Pull the cowl trim panel rearward and remove it
from the vehicle.
INSTALLATION
1. Position the cowl trim panel (1) onto the door sill
(3).
2. Push the cowl trim panel forward and then engage
the retaining tabs that secure the sill trim panel to
the rear door sill.

REAR DOOR SILL TRIM COVER
REMOVAL
1. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs of the sill trim panel (1) from the
retainer clips in the rear door sill (2) and remove
the trim panel.
INSTALLATION
1. Position the sill trim panel (1) onto the rear door sill
(2).
2. Engage the retaining tabs that secure the sill trim
panel to the rear door sill.