2022 TOYOTA BZ4X Owners Manual (in English)

559
9
Owners Manual_Europe_M42D76_en
9-1. Specifications
Vehicle specifications
*1: Minimum pedal clearance when depressed with a force of 300 N (31 kgf, 66 lbf)
while the EV system is operating.
*2: Make sure to confirm that the brake system warning light (yell ow) does not illumi-
nate. (If the brake system warning light illuminates, refer to P.515)
*3: Left-hand drive vehicles
*4: Right-hand drive vehicles
18-inch tires
20-inch tires
Parking brake indicator*2
When pushing the parking brake switch for 1 to
4 seconds: turns off
When pulling the parking brake switch for 1 to 4
seconds: comes on
Fluid typeSAE J1703 or FMVSS No.116 DOT 3
SAE J1704 or FMVSS No. 116 DOT 4
Steering
Free playLess than 30 mm (1.2 in.)
Tires and wheels
Tire size235/60R18 103H
Tire inflation pressure
(Recommended cold tire inflation
pressure)
Front: 260 kPa (2.6 kgf/cm2 or bar, 38 psi)
Rear: 260 kPa (2.6 kgf/cm2 or bar, 38 psi)
Wheel size18  7 1/2 J
Wheel bolt torque140 N•m (14.3 kgf•m, 103 ft•lbf)
Tire size235/50R20 104V XL
Tire inflation pressure
(Recommended cold tire inflation
pressure)
Front: 260 kPa (2.6 kgf/cm2 or bar, 38 psi)
Rear: 260 kPa (2.6 kgf/cm2 or bar, 38 psi)
Wheel size20  7 1/2 J
Wheel bolt torque140 N•m (14.3 kgf•m, 103 ft•lbf)

560
Owners Manual_Europe_M42D76_en
9-1. Specifications
■When towing a trailer
Add 20.0 kPa (0.2 kgf/cm2 or bar, 3 psi) to the recommended tire inflation pressure
and drive at speeds below 100 km/h (62 mph).

561
9
Owners Manual_Europe_M42D76_en
9-2. Customization
Vehicle specifications
9-2.Customiz ation
■Changing using the multi-
information display
1 Press or of the meter
control switches and select .
2 Press or of the meter
control switches, select the item.
3 To switch the function on and
off, press icon to switch to
the desired setting.
4 To perform detailed setting of
the function, press and hold
and display the setting screen.
The method of detailed setting differs
for each screen. Please refer to the advice sentence displayed on the screen.
To go back to the previous screen or
exit the customize mode, press .
■Changing by using the multi-
media system
1 Select on the main menu
2 Select “Vehicle customize”.
3 According to the display, select
the desired setting.
Various setting can be changed.
Refer to the list of settings that can be
changed for details.
■When customizing using the multi-
media system or multi-information display
Stop the vehicle in a safe place, apply
the parking brake, and shift the shift position to P. Also, to prevent 12-volt battery discharge, leave the EV system
operating while customizing the fea- tures.
Some function settings are changed simultaneously with other fu nctions
being customized. Contact any authorized Toyota retailer or Toy ota autho-
rized repairer, or any reliable repairer for further details.
Customizable features
Your vehicle includes a variety
of electronic features that can
be personalized to your prefer-
ences. The settings of these
features can be changed by
using the multi-information
display, multimedia system, at
any authorized Toyota retailer
or Toyota authorized repairer,
or any reliable repairer.
Customizing vehicle fea-
tures
NOTICE
■During customization
To prevent 12-volt battery discharge, ensure that the EV system is operat-
ing while customizing features.
Customizable features

562
Owners Manual_Europe_M42D76_en
9-2. Customization
Settings that can be changed using the multimedia system
Settings that can be changed using the multi-information displ ay
Settings that can be changed by any authorized Toyota retailer or Toy ota
authorized repairer, or any reliable repairer
Definition of symbols: O = Available,  = Not available
■Alarm (P.77)
■Charging system (P.121, 129)
■Gauges, meters and multi-information display (P.172, 175)
FunctionDefault settingCustomized set-
ting
Deactivates the alarm when the
doors are unlocked using the
mechanical key
OffOn——O
FunctionDefault settingCustomized set-
ting
Charging currentMAX8AOO–16A
Charging limitFull
90%
OO–
80%
70%
60%
50%
DC charging powerMAX
125 kW
OO–100 kW
75 kW
50 kW
Battery coolerOnOffOO–
Function*1Default settingCustomized set-
ting
Language*2EnglishExcept English*3O

563
9
Owners Manual_Europe_M42D76_en
9-2. Customization
Vehicle specifications
*1: For details about each function: P.178
*2: The default setting varies according to country.
*3: Available languages may differ depending on the target region.
*4: if equipped
■Rear seat reminder (P.187)
Units*2km
(kWh/100km)
km (km/kWh)
Omiles
(miles/kWh)
Power Consumption
Total average
(Average power
consumption
[after reset])
Trip average
(Average power
consumption
[after start])
O
Audio system linked displayOnOffO
AWD system display*4OnOffO
Drive Info TypeAfter StartAfter ResetO
Drive Info ItemsDistanceAverage SpeedOTo t a l T i m e
Pop-up displayOnOffO
Closing displayDrive InfoCharging
ScheduleO
Suggestion functionOn
On (when the
vehicle is
stopped)OO
Off
FunctionDefault settingCustomized set-
ting
Indication to prevent misplace-
ment in the rear seatOnOff—O—
Function*1Default settingCustomized set-
ting

564
Owners Manual_Europe_M42D76_en
9-2. Customization
■Door lock (P.185, 542)
■Power back door* (P.192)
*: If equipped
FunctionDefault settingCustomized set-
ting
Unlocking using a mechanical
key
All doors
unlocked in one
step
Driver’s door
unlocked in one
step, all doors
unlocked in two
step
O
Speed linked door locking func-
tionOnOffOO
Shift position linked door locking
functionOffOnOO
Shift position linked door unlock-
ing functionOffOnOO
Driver’s door linked door unlock-
ing functionOnOffOO
FunctionDefault settingCustomized set-
ting
Power back door opening posi-
tion51 to 4O
Power back door operationOnOffO
Buzzer volumeLevel 3Level 1OLevel 2
Operation buzzerOffOnO
Hands Free Power Back Door
(kick sensor)*OnOffOO
Kick in buzzer (kick sensor)*OnOffO
Hands Free Power Back Door
(kick sensor) when the power
switch is OFF*OnOffO

565
9
Owners Manual_Europe_M42D76_en
9-2. Customization
Vehicle specifications
■Smart entry & start system and wireless remote control (P.183,
203)
■Smart entry & start system ( P.203)
■Wireless remote control (P.183)
*: If equipped
FunctionDefault settingCustomized set-
ting
Time elapsed before automatic
door lock function is activated if
door is not opened after being
unlocked
30 seconds
60 seconds
O120 seconds
Open door warning buzzerOnOffO
FunctionDefault settingCustomized set-
ting
Smart entry & start systemOnOffOO
Smart door unlockingAll the doorsDriver’s doorOO
Time elapsed before unlocking
all the door when gripping and
holding the driver’s door handle
2 seconds
Off
O1.5 seconds
2.5 seconds
Number of consecutive door
lock operations
As many as
desired2 timesO
FunctionDefault settingCustomized set-
ting
Wireless remote controlOnOffO
Unlocking operation
All doors
unlocked in one
step
Driver’s door
unlocked in one
step, all doors
unlocked in two
step
OO
The function that activates the
switch of the wireless
remote control when locking the
door ( P.192)*
Off
On (Unlocking
all the door)
OOn (Unlocking
back door only)

566
Owners Manual_Europe_M42D76_en
9-2. Customization
■Driving position memory* (P.222)
*: If equipped
■Enabling easier driver entry and exit (power easy access system)*
( P.222)
*: If equipped
■Outside rear view mirrors (P.217)
■Power windows (P.219)
FunctionDefault settingCustomized set-
ting
Selection the door linking driving
position memory with door
unlock operation
Driver’s doorAll doorsO
Function to prevent contact
between the head restraint and
ceiling (while moving to memory
location)
OnOffO
FunctionDefault settingCustomized set-
ting
Driver’s seat slide movement
when exiting the vehicleFullOffOOPartial
FunctionDefault settingCustomized set-
ting
Automatic mirror folding and
extending operation
Linked to the
locking/unlock-
ing of the doors
Off
OLinked to opera-
tion of the power
switch
FunctionDefault settingCustomized set-
ting
Mechanical key linked operationOffOnO
Wireless remote control linked
operationOffOnO
Wireless remote control linked
operation signal (buzzer)OnOffO