2022 TOYOTA BZ4X Owners Manual (in English)

567
9
Owners Manual_Europe_M42D76_en
9-2. Customization
Vehicle specifications
■Reverse warning buzzer
■Power switch (P.246)
■Automatic light control system (P.259)
■Lights (P.259)
■AHS (Adaptive High-beam System)*1 (P.262)
FunctionDefault settingCustomized set-
ting
Signal (buzzer) when the shift
position is in RContinualMuteO
FunctionCustomized setting
ACC modeON/OFFOO
FunctionDefault settingCustomized set-
ting
Light sensor sensitivityStandard-2 to 2OO
Time elapsed before headlights
turn off (Extended Headlight
Lighting system)
30 seconds
60 seconds
O90 seconds
120 seconds
FunctionDefault settingCustomized set-
ting
Light reminder buzzerOnOffO
FunctionCustomized setting
Adaptive High-beam SystemOn/OffO
Brightness and illuminated area
adjustment of the high beams
according to the vehicle speed
15 km/h (9 mph)/30 km/h (19
mph)/60 km/h (37 mph)O
Intensity adjustment of the high
beams when driving around a
curve (illuminates the area in the
direction vehicle is turning more
brightly)
On/OffO

568
Owners Manual_Europe_M42D76_en
9-2. Customization
*1: If equipped
■PCS (Pre-Collision System) (P.283)
■LDA (Lane Departure Alert) (P.299)
■Dynamic radar cruise control/Speed Limiter (P.307, 318)
Projection distance adjustment of
the low beams according to the
distance to a preceding vehicle
On/OffO
High beam light distribution con-
trol for rainOn/OffO
Light distribution control for urban
areasOn/OffO
FunctionCustomized setting
Pre-Collision SystemON/OFFO
Warning timingLater/Default/EarlierO
FunctionCustomized setting
Lane Departure Alert systemON/OFFO
Alert timingDefault/EarlierO
Alert optionsVibration/BeepO
FunctionCustomized setting
Extended Resume TimeON/OFFO
Overtake preventionON/OFFO
Acceleration settingHigh/Mid/LowO
Speed setting (short press)•1 km/h/5 km/h/10 km/h*1
•1 mph/5 mph/10 mph*2O
Speed setting (long press)•1 km/h/5 km/h/10 km/h*1
•1 mph/5 mph/10 mph*2O
DRCC (RSA)ON/OFFO
Speed limit offset-5~+5O
FunctionCustomized setting

569
9
Owners Manual_Europe_M42D76_en
9-2. Customization
Vehicle specifications
*1: When the set speed is shown in “km/h”
*2: When the set speed is shown in “MPH”
■Speed limiter*1 (P.318)
*1: If equipped
*2: When the set speed is shown in “km/h”
*3: When the set speed is shown in “MPH”
■RSA (Road Sign Assist) (P.304)
■Driver break suggestion (P.299)
Guide messageON/OFFO
Curve speed reductionOFF/High/Mid/LowO
FunctionCustomized setting
Speed setting (short press)•1 km/h/5 km/h/10 km/h*2
•1 mph/5 mph/10 mph*3O
Speed setting (long press)•1 km/h/5 km/h/10 km/h*2
•1 mph/5 mph/10 mph*3O
Speed limit offset-5~+5O
Guide messageON/OFFO
FunctionCustomized setting
Road Sign AssistON/OFFO
Excess speed notification methodNone/Visual/Visual & AudibleO
Other notifications method (For
vehicles with a navigation sys-
tem)
None/Visual/Visual & AudibleO
Excess speed notification level10 km/h (5 mph)/5 km/h (3
mph)/2 km/h (1 mph)O
FunctionCustomized setting
Driver break suggestionON/OFFO
FunctionCustomized setting

570
Owners Manual_Europe_M42D76_en
9-2. Customization
■Driver monitor* (P.282)
*: If equipped
■BSM (Blind Spot Monitor)* (P.324)
*: If equipped
■Toyota parking assist-sensor*1 (P.333)
*1: If equipped
*2: This setting is linked with the buzzer volume of the RCTA (Rear Crossing Traffic
Alert) function.
■RCTA (Rear Crossing Traffic Alert) function*1 ( P.343)
*1: If equipped
*2: This setting is linked with the buzzer volume of the Toyota parking assist-sensor
FunctionCustomized setting
Warning functionON/OFFO
FunctionDefault settingCustomized set-
ting
Outside rear view mirror indica-
tor brightnessBrightDimO
Alert timing for presence of
approaching vehicle (sensitivity)IntermediateEarlyOLate
BSM (Blind Spot Monitor)OnOffO
FunctionDefault settingCustomized set-
ting
Toyota parking assist-sensorOnOffO
Buzzer volume*2Level 2Level 1OLevel 3
FunctionDefault settingCustomized set-
ting
RCTA (Rear Crossing Traffic
Alert) functionOnOffO
Buzzer volume*2Level 2Level 1OLevel 3

571
9
Owners Manual_Europe_M42D76_en
9-2. Customization
Vehicle specifications
function.
■RCD (Rear Camera Detection)* (P.348)
*: If equipped
■PKSB (Parking Support Brake)* (P.352)
*: If equipped
■SEA (Safe Exit Assist)*1 (P.328)
*1: If equipped
*2: This setting changes in accordance with My Settings
■Automatic air conditioning system (P.420)
FunctionDefault settingCustomized set-
ting
RCD (Rear Camera Detection)
functionOnOffO
FunctionDefault settingCustomized set-
ting
PKSB (Parking Support Brake)
functionOnOffO
FunctionDefault settingCustomized set-
ting
Safe Exit AssistOnOffO
Detection sensitivity*2MiddleHighOLow
Outside rear view mirrors dis-
play*2OnOffO
FunctionDefault settingCustomized set-
ting
A/C auto switch operationOnOffOO

572
Owners Manual_Europe_M42D76_en
9-2. Customization
■Remote Air Conditioning System (P.427)
■Illumination (P.431)
*: If equipped
■Vehicle customization
●When the speed linked door locking function and shift position linked door locking function are both on, the door
lock operates as follows. • When shifting the shift position to any
position other than P, all the doors will be locked.• If the vehicle is started with all the
FunctionDefault settingCustomized set-
ting
Operation using the “A/C” button
on the wireless remote control
Press and
hold for 0.8
seconds
Press once
O
Press twice
Press and hold for
2.4 seconds
Off
Stopping the operation using the
“A/C” button on the wireless
remote control
Press twice
Press once
O
Press and hold for
0.8 seconds
Press and hold for
2.4 seconds
Off
FunctionDefault settingCustomized set-
ting
Time elapsed before the interior
lights turn off15 seconds
Off
OO7.5 seconds
30 seconds
Operation after the power switch
is turned offOnOffO
Operation when the doors are
unlockedOnOffO
Operation when you approach
the vehicle with the electronic
key on your person
OnOffO
Rear interior light and footwell
lights*OnOffO

573
9
Owners Manual_Europe_M42D76_en
9-2. Customization
Vehicle specifications
doors locked, the speed linked door
locking function will not operate. • If the vehicle is started with any door unlocked, the speed linked door lock-
ing function will operate.
●When the Smart entry & start system
is off, the entry unlock function cannot be customized.
●When the doors remain closed after unlocking the doors and the timer acti-vated automatic door lock function
activates, signals will be generated in accordance with the operational sig-nal (Emergency flashers) function set-
ting.

574
Owners Manual_Europe_M42D76_en
9-3. Initialization
9- 3. In it ia li za ti on
*: If equipped
Items to initialize
The following item must be initialized for normal system operation
after such cases as the 12-volt battery being reconnected, or m ain-
tenance being performed on the vehicle:
List of the items to initialize
ItemWhen to initializeReference
Power back door*• After reconnecting or changing
the 12-volt battery
• After changing a fuse
P. 1 9 8
Power window• When functioning abnormallyP. 2 1 9
PKSB (Parking Support Brake)*• After reconnecting or changing
the 12-volt batteryP. 3 5 6
Tire pressure warning system
• When the specified tire inflation
pressure has changed, such as
due to carried load, etc.
• When the tire inflation pressure
is changed such as when the
tire size is changed.
P. 4 8 0
Toyota parking assist monitor*• 12-volt battery has been rein-
stalled
• The steering wheel has been
moved while the 12-volt battery
was being reinstalled
• 12-volt battery power is low
Refer to
“Multimedia
owner’s
manual”.Panoramic view monitor*