2017 MAZDA MODEL CX-5 Owner's Manual - RHD (UK, Australia) (in English)

Front-facing type
WARNING
Never install a front-facing child seat in the
wrong seat position:
Installing a front-facing child seat without
System Suitability for Various Seat
Positions” is dangerous. A front-facing
child seat installed in the wrong seat
position cannot be properly secured. In a
coll ision, the child could hit something or
someone in the vehicle and be seriously
injured or even killed.
Do n ot install a front-facing child-re straint
system on the front pa ssenger seat unless it
is unavoid able:
In a collision, the force of a deploying air
bag could cause serious injury or death to
the child. If installing a front-facing
child-restraint system on the front
passenger seat is unavoidable, move the
front passenger seat as far back as possible
and adjust the seat bottom (height
adjustable seat bottom) to the highest
position at which the seat belt fastening
the child-restraint system is securely
tightened.
Junior Seat Installation Position
A junior sea t is used in the front-facing
pos ition only.
If a junior seat with a removable backr est
is used, usin g the j unior s eat with the
b ack rest ins talled is recommended.

Refer to the table, “Child-Restraint System
Suitabil ity for Various S eat Positions” for
junior seat inst allation pos ition (page 2-
34).
WARNING
Always inst all a junior se at in the co rrect
seat position:
Installing a junior seat without
consulting the table “Child-Restraint
System Suitability for Various Seat
Positions” is dangerous. A junior seat
installed on the wrong seat position cannot
be properly secured. In a collision, the child
could hit something or someone in the
vehicle and be seriously injured or even
killed.
Essential Safety Equipment
Child Restraint
2-32
2017-6-7 7:51:19Form No. CX-5 8FY4-EE-17E+L_Edition2
We recommend the use of the junior seat
with backrest to allow simple adjustment
of the shoulder belt position and to give
your child the best protection.

Do not install a front-facing child-restraint
system on the front passenger seat unless it
is unavoidable:
In a collision, the force of a deploying air
bag could cause serious injury or death to
the child. If installing a front-facing
child-restraint system on the front
passenger seat is unavoidable, move the
front passenger seat as far back as possible
and adjust the seat bottom (height
adjustable seat bottom) to the highest
position at which the seat belt fastening
the child-restraint system is securely
tightened.
Essential Safety Equipment
Child Restraint
2-33
2017-6-7 7:51:19Form No. CX-5 8FY4-EE-17E+L_Edition2

Child-Restraint System Suitability for Various SeatPositions Table
(Europe and countries conformi ng to the UNECE 16 regulation)
Provided information in the table shows your child-restraint sy stem suitability for various
seating position. For installati on suitability of other manufacturer child-restraint system,
carefully consult the manufacturer's instructions which accompa ny the child-restraint
system.
When installing a child-restrain t system, the following points must be observed:
•If the child-restraint system doe s not fit into the seatback be cause of the head restraint,
adjust the head restraint or remove the head restraint so that the child-restraint system fits
into the seatback. Howe ver, when installing a booster seat, alw ays install the vehicle head
restraint to the seat where the booster seat is installed.
Refer to Head Restraints on page 2-15.
•When installing a child-restrain t system to the rear seat, adjust the front seat position so
that the front seat does not cont act the child-restraint system.
Refer to Seat Operation on page 2-5.
•When installing a child-restrain t system came equipped with a t ether, remove the head
restraint.
Refer to Head Restraints on page 2-15.
ISOFIX anchor-secured child-restraint systems
When installing a child-restraint system to the rear seat, refe r to the child-restraint system
manufacturer's instructions and the Using ISOFIX Anchor on page 2-39.
Mass groupSize
Class Fixture Seat Positions
Vehicle ISOFIX positions Rear seat (centre) Front passenger
seat (outboard)
Rear seat
(outboard)
Carrycot FISO/L1 X
XX
GISO/L2 X XX
(1) X XX
GROUP 0 Up to 10 kg (up to 22 lb) EISO/R1 IL
XX
(1) X XX
GROUP 0
Up to
13 kg (up to 29 lb) EISO/R1 IL
XX
DISO/R2 IL XX
CISO/R3 IL XX
(1) X XX
Essential Safety Equipment
Child Restraint
2-34
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Mass groupSize
Class Fixture Seat Positions
Vehicle ISOFIX positions Rear seat (centre) Front passenger
seat (outboard)
Rear seat
(outboard)
GROUP 1 9 kg ― 18 kg (20 lb ― 40 lb) DISO/R2 IL
XX
CISO/R3 IL XX
BISO/F2 IUF XX
B1 ISO/F2X IUF XX
AISO/F3 IUF XX
(1) X X X
GROUP 2 15 kg ― 25 kg (33 lb ― 55 lb) (1)
IL XX
GROUP 3 22 kg ― 36 kg (48 lb ― 79 lb) (1)
IL XX
(1) For the CRS which do not carry the ISO/XX size class identi fication (A to G), for the applicable mass group, the
car manufacturer shall indicate t he vehicle specific ISOFIX child-restraint system(s) recommended for each
position.
Key of letters to be inserted in the above table:
IUF = suitable for ISOFIX forward child-restraints systems of u niversal category approved for use in this mass
group.
IL = suitable for particular ISO FIX child-restraint systems (CR S).
These ISOFIX CRS are those of the “specific vehicle”, “restricted” or “semi-universal” categories.
A Mazda genuine child-restraint system can be installed. Regard ing child-restraint systems which can be installed,
refer to the accessories catalog.
(Except Europe)
Regarding child-restraint systems which can be installed to you r Mazda, consult an expert repairer, we recommend
an Authorised Mazda Repairer.
X = ISOFIX position not suitable for ISOFIX child-restraint systems in this mass group and/or this size class.
i-Size child-restraint systems
Vehicles with the mark indicated on the front surface of a rear seatback are i-S ize
child-restraint certified.
When installing a child-restraint system to the rear seat, refer to the child-restraint system
manufacturer's instructions and the Using ISOFIX Anchor on page 2-39.
Essential Safety Equipment
Child Restraint
2-35
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Marking location
An i-Size child-restraint system can be installed to the specified seat as follows:
Front passenger seat Rear seat (outboard) Rear seat (centre)
i-Size child-restraint systems Xi
-UX
Key of letters to be inserted in the above table:
i-U = Suitable for i-Size “universal” child-restraint systems f orward and rearward facing.
X = Seating position not suitabl e for i-Size “universal” child-restraint systems.
NOTE
•An i-Size child-restraint system refers to a child-restraint system which has acquired
i-Size category certification for the UNECE 129 regulation.
•Vehicles with the mark indicated on the front surface of a rear seatback are not i-Size
child-restraint certified.
Seat belt-secured child-restraint systems
System group Age group We i g h t
group Child-restr
aint system type Front passenger seat
Rearseat
(out-
board) Rear
seat
(centre)
Without
front
passen-
ger oc-
cupant
classifi-
cation
system With front passenger
occupant classification system
(Air bag
enabled)(Air bag
disabled)
GROUP 0 Up to about
9 months old Up to 10 kg
(up to 22 lb) Baby seat X X X U
L
*1*3
Essential Safety Equipment
Child Restraint
2-36
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Systemgroup Age group
We i gh t
group Child-restr
aint system
type Front passenger seat
Rearseat
(out-
board) Rear
seat
(centre)
Without
front
passen- ger oc-
cupant
classifi- cation
system With front passenger
occupant classification system
(Air bag
enabled)(Air bag
disabled)
GROUP 0
Up to about 2 years old Up to 13 kg
(up to 29 lb) Baby seat X X X U
L*1*3
GROUP 1About 8
months to 4 years old 9 kg ― 18
kg (20 lb ― 40 lb) Child seat
L*2L*2L*2UX
GROUP 2 About 3 to 7
years old 15 kg ― 25
kg (33 lb ― 55 lb) Junior seat
L
*2L*2L*2UL*1*3
GROUP 3 About 6 to
12 years old 22 kg ― 36
kg (48 lb ― 79 lb) Junior seat
L*2L*2L*2UL*1*3
Key of letters to be inserted in the above table:
U = Suitable for “universal” cate gory restraints approved for use in this mass group.
L = A Mazda genuine ch ild-restraint system can be installed. Regarding child-restraint systems which can be
installed, refer to the accessories catalog.
X = Seat position not suitable for children in this mass group.
*1 When a child-restraint system is installed to the rear centre seat, do not seat occupants in the rear left outboard
seat position.
*2 When installing a child-restrai nt system to the front passenger seat, adjust the seat slide position as far back as
possible. Adjust the seat bottom to the highest position so tha t the seat belt can securely fasten the
child-restraint system.
Refer to Seat Operation on page 2-5.
*3 Child-restraint systems equippe d with a support leg cannot be installed on the r ear centre seat.
(Other countries)
Please comply with the legal regulations concerning the use of child-restraint systems in
your country.
Essential Safety Equipment
Child Restraint
2-37
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Installing Child-RestraintSystems
▼Anchor Bracket
Anchor brackets for securing
child-restraint systems are equipped in the
vehicle. Locate each anchor position using
the illustration.
To install a child-restraint system, remove
the head restraint. Always follow the
instruction manual accompanying the
child-restraint system.

Anchor bracket location
Use the indicated anchor bracket locations
when installing a child-restraint system
equipped with a tether.
For leftFor right
WA R N I N G
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the incorrect
tether anchor position is dangerous. In a
collision, the tether strap could come
off
and loosen the child-restraint system. If the
child-restraint system moves it could result
in death or injury to the child.
Always remove the head restraint and
install child-restraint system:
Installing a child-restraint system without
removing the head restraint is dangerous.
The child-restraint system cannot be
installed correctly which may result in
death or injury to the child in a collision.
Tether strap
Forward
Always install the head restraint and adjust
it to the appropriate position after
removing the child-restraint system:
Driving with the head restraint removed is
dangerous as impact to the occupant's
head cannot be prevented during
emergency braking or in a collision, which
could result in a serious accident, injury or
death.
Refer to Head Restraints on page 2-15.
▼ Using the Seat Belt
When installing a child-restraint system,
follow the installation instructions
included with the product.
In addition, remove the head restraint.
However, when installing a booster seat,
always install the vehicle head restraint to
the seat where the booster seat is installed.
Essential Safety Equipment
Child Restraint
2-38
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Using ISOFIX Anchor
WA R N I N G
Follow the manufacturer's instructions for
the use of the child-restraint system:
An unsecured child-restraint system is
dangerous. In a sudden stop or a collision it
could move causing serious injury or death
to the child or other occupants. Make sure
any child-restraint system is properly
secured in place according to the
manufacturer's instructions.
Make sure the child-restraint system is
properly secured:
A child-restraint system that is not secured
is dangerous. In a sudden stop or collision,
it can become a projectile and hit someone,
causing serious injury. When not in use,
remove it from the vehicle, put it in the
luggage compartment or at least make
sure it is securely fastened to the ISOFIX
anchors.
Make sure there are no seat belts or foreign
objects near or around the ISOFIX
anchor-secured child-restraint system:
Not following the child-restraint system
manufacturer's instructions when
installing the child-restraint system is
dangerous. If seat belts or a foreign object
prevent the child-restraint system from
being securely attached to the ISOFIX
anchors and the child-restraint system is
installed improperly, the child-restraint
system could move in a sudden stop or
collision causing serious injury or death to
the child or other occupants. When
installing the child-restraint system, make
sure there are no seat belts or foreign
objects near or around the ISOFIX anchors.
Always follow the child-restraint system
manufacturer's instructions.
1. First, adjust the front seat to allow
clearance between the child-restraint
system and the front seat (page 2-5).
2. If the rear seat is reclined, return it to the upright position.
3. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
Essential Safety Equipment
Child Restraint
2-39
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2