2017 MAZDA MODEL CX-5 Owner's Manual - RHD (UK, Australia) (in English)

•The distance and warning sensitivity
(likelihood of a warning) which the
system uses to determine the possibility
of a lane departure can be changed.
Refer to Setting Change
(Personalisation Features) on page 9-
12.
Vehicle lane line display
When the LAS&LDWS becomes
operational while on standby, the vehicle
lane lines are displayed in the
multi-information display. The system
changes to operational status display when
the system detects a white (yellow) line on
either the left or right.
(Stand-by status)
(Operational status)
Auto cancel
In the following cases, the LAS&LDWS is
automatically cancelled, the LAS&LDWS
warning indication (amber) turns on, and
an alert is displayed. When the
LAS&LDWS become operational, the
system turns back on automatically.
•The temperature inside the camera is
high or low.
•The windscreen around the camera is
foggy.
•The windscreen around the camera is
blocked by an obstruction, causing poor
forward visibility.
(Auto cancel of warnings)
When the following operations are
performed, the LAS&LDWS determines
that the driver intends to make a lane
change and the system operation is
cancelled automatically. The LAS&LDWS
resumes automatically after the operation.
•The steering wheel is operated abruptly.
•The brake pedal is depressed.
•The accelerator pedal is depressed.
(To cancel the automatic sensitivity
cancel function, deselect “Warning
sensitivity” in the personalisation
features setting.)
•The direction indicator lever is operated.
•The vehicle crosses a lane line.
When Driving
i-ACTIVSENSE
4-170
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼System Cancelling
When the LAS&LDWS is turned off,
press the LAS&LDWS OFF switch.
The LAS&LDWS OFF indicator light
turns on.
NOTE
•In the following cases, the LAS&LDWS
is cancelled automatically and the
LAS&LDWS OFF indication is
displayed in the multi-information
display. Have your vehicle inspected at
an expert repairer, we recommend an
Authorised Mazda Repairer.
•There is a malfunction in the power
steering.
•There is a malfunction in the TCS.
•There is a malfunction in the Forward
Sensing Camera (FSC).
(European models)
•When the ignition is switched OFF, the
LAS&LDWS becomes operational the
next time the ignition switched ON.
(Except European models)
•When the ignition is switched OFF, the
system status before it was turned off is
maintained. For examp le, if the ignition
is switched OFF with the lane-keep
system operable, the system will be
operable when the ignition is switched
ON the next time.
When the LAS&LDWS is turned off, the
vehicle lane line indication in the
multi-information display and the active
driving display turn off.
When Driving
i-ACTIVSENSE
4-171
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Lane Departure Warning
If the system determines that the vehicle may deviate from its
lane, the lane departure
warning (beep sound, rumble sound
*1, or steering wheel vibration) is activated and the
direction in which the system determines that the vehicle may d eviate is indicated in the
multi-information display or the active driving display.
For vehicles equipped with the m ulti-information display, the direction which the system
determined that the vehicle may be deviating from its lane is indicated in the
multi-information display.
For vehicles equipped with the act ive driving display, the colour of the lane line in the
direction which the system determined that the vehicle may be d eviating from its lane
changes from white to amber and the vehicle lane line flashes.
Multi-information Display Active Driving Display
NOTE
•If you have set the lane departure warning sound to the beep sound/rumble sound*1
setting, the warning sound may not be heard depending on the surrounding noise
conditions.
•If you have set the lane departure warning system to the steering wheel vibrations setting,
the vibration may not be felt dependi ng on the road surface conditions.
•When the setting for the steering operation assist is changed to operational, the warnings
can be set to activate/not activate. (When the setting for the steering operation assist is
changed to non-operational, the warnings cannot be set to not activate.)
Refer to Setting Change (Personalisation Features) on page 9-12.
•The LAS&LDWS can be changed to the following settings regardless of whether the
steering operation assist has been set to operational/non-operational. Always check the
setting status when driving the vehicle and make setting changes if necessary.
Refer to Setting Change (Personalisation Features) on page 9-12.
•Steering wheel vibr ation: Strong/weak
•Warning sound volume
•Types of warnings (steering wheel vibration/beep sound/rumble sound*1)
*1 A rumble strip is a series of grooves in the road pavement surface positioned at specific
intervals, and when the vehicle passes over it a vibration and rumble sound is produced
which alerts the driver that the vehicle is departing from the lane.
When Driving
i-ACTIVSENSE
4-172
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

The rumble sound is a reproduction of the sound which occurs when a vehicle passes
over a rumble strip.
Rumble
Groove
When Driving
i-ACTIVSENSE
4-173
2017-6-7 7:51:19Form No. CX-5 8FY4-EE-17E+L_Edition2

Adjustable Speed Limiter (ASL)*
The ASL is a function to prevent the vehicle from being driven at a vehicle speed faster than
a set speed. The vehicle speed is controlled to kept it below t he set speed even if the
accelerator pedal is depressed.
The ASL can be set between 30 km/h (20 mph) and 200 km/h (125 m ph). The vehicle speed
may exceed the set speed when the vehicle is driven on a down s lope, however, the system
notifies the driver by flashing the display and operating a war ning sound.
WA R N I N G
Always turn
off the system when changing drivers:
If the driver is changed and the new driver is unaware of the ASL function, the vehicle may not
accelerate when the driver depresses the accelerator pedal, leading to an accident.
When Driving
i-ACTIVSENSE
4-174*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

The system consists of the ASL display and the speed limiter switch on the steering wheel.

Cruise control system
MODE switch
RES/+ switch
SET- switch
OFF/CAN switch CANCEL switch RES switch
OFF switch
MODE
switch
SET- switch SET+ switch
Active Driving Display
(Windscreen Type)
(Auto Flip-up Type)
Instrument Cluster Type A
(With Multi-information Display)
(Without Multi-information Display) Instrument Cluster Type B
Mazda Radar Cruise Control (MRCC) or
Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function)
When Driving
i-ACTIVSENSE
4-175
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Adjustable Speed Limiter (ASL) Display
The setting status of the ASL is
displayed in the active driving display (vehicles with active
driving display) or the displa y in the instrument cluster.
Stand-by display
Displays when the spee d limiter switch is operated and the system is turned on.
Turns off when the system is turned off.

Active Driving Display With Multi- information DisplayWithout Multi-
information Display
Setting display
With cruise control
Displays when the SET
switch is operated
and the speed is set.
With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Co ntrol with
Stop & Go function (MRCC with Stop & Go function)
Displays when the SET
or SET switch is operated an d the speed is set.

Active Driving Display With Multi-
information DisplayWithout Multi-
information Display
Cancel display
Displays when any of the follo
wing operations is done and the s ystem is temporarily
cancelled.
•OFF/CAN switch is operated
•Accelerator pedal is strongly depressed

Active Driving Display With Multi- information DisplayWithout Multi-
information Display
When Driving
i-ACTIVSENSE
4-176
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Adjustable Speed Limiter (ASL) M
ain Indication (White)/Adjustable Speed
Limiter (ASL) Set Indication (Green)
The indication has two colours.
ASL main indication (white)
The indication is display in white when the MODE switch is pres sed and the ASL is
activated.
ASL set indication (green)
The indication is display in green when a speed has been set.
▼ Speed Limiter Warning Beep
Instrument cluster type A
If the vehicle speed exceeds the set speed by about 5 km/h (3 mph) or faster, the background
of the ASL set speed indication turns amber and flashes three t
imes. In addition, a warning
sound is activated at the same time. The indication stops flash ing and remains on if the
vehicle speed continues to exceed the set speed by about 5 km/h (3 mph) or faster, and the
indication and warning sound remain on until the vehicle is dri ven at the set speed or slower.
Instrument cluster type B
If the vehicle speed exceeds the set speed by about 5 km/h (3 mph) or more, a warning
sound operates continuously and the ASL display flashes at the same time. The warning
sound operates and the display flashes until the vehicle speed decreases to the set speed or
less.
Verify the safety of the surrounding area and adjust the vehicl e speed by applying the
brakes. Additionally, keep a safer distance from the vehicles b ehind you.

Active Driving Display With Multi-
information DisplayWithout Multi-
information Display
When Driving
i-ACTIVSENSE
4-177
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2