2017 MAZDA MODEL CX-5 Owner's Manual - RHD (UK, Australia) (in English)

SignalWarning
(Red)
Brake Pedal Opera-
tion Demand Warn-
ing Light
*
When only flashing
Flashes if there is the possibilit y of the vehicle not being held in the stopped position by
the AUTOHOLD function, such as on steep slopes. Depress and hol d your foot on the
brake pedal.
When flashing and beep sound is activated at the same time
The warning light flashes and th e beep sound is activated for about five seconds if there is
a problem with the system. If th e warning light flashes and the warning sound is activat-
ed, immediately depress the brak e pedal and stop using the AUTO HOLD function then
contact an expert repairer, we recommend an Authorised Mazda Re pairer.
WARNING
Immediately depress the brake pedal if the warning light flashes and the beep sound is acti‐
vated while using the AUTOHOLD function:
Because the AUTOHOLD function is cancelled forcibly, the vehicle may move unexpectedly
and result in an accident.
Electric Parking
Brake (EPB) Indica-
tion/Indicator Light This warning has the following functions:
Parking brake warning/Indicator light inspection
The light illuminates when the el
ectric parking brake (EPB) is applied with the ignition
switched to START or ON. It turns off when the electric parking brake (EPB) is released.
When the light is turned on
If the light remains turned on e ven if the electric parking brake (EPB) switch is released,
an expert repairer, we recommend an Authorised Mazda Repairer.
When the light is flashing
The light flashes if the electric parking brake (EPB) has a mal function. If the light re-
mains flashing even if the elect ric parking brake (EPB) switch is operated, consult an ex-
pert repairer, we recommend an Au thorised Mazda Repairer as soon as possible.
Check Engine LightIf this light illuminates while d
riving, the vehicle may have a problem. It is important to
note the driving conditions when the light illuminated and consult an expert repairer, we
recommend an Authorised Mazda Repairer.
The check engine light may illuminate in the following cases:
•The engine's electrical system has a problem.•The emission control system has a problem.•The fuel tank level being very low or approaching empty.
If the check engine light remains on, or it flashes continuously , do not drive at high
speeds and consult an expert rep airer, we recommend an Authorised Mazda Repairer as
soon as possible.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-48*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning
Automatic Trans-
axle Warning Indi- cation/Warning
Light
*
The indication/light illuminates when the transaxle has a problem.
CAUTION
If the automatic transaxle warning indication/light illuminates, the transaxle has an electri‐
cal problem. Continuing to drive your Mazda in this condition could cause damage to your
transaxle. Consult an expert repairer, we recommend an Authorised Mazda Repairer as
soon as possible.
4WD Warning Indi-
cation*
“4WD system malfunction” is displayed
The indication is dis played under the following conditions. The system may have a mal-
function. Have the vehicle checked at an expert repairer, we recommend an Authorised
Mazda Repairer.
•When there is a malfunction in the 4WD system.•When there is a large difference between the tyre size of the f ront and rear wheels.
“4WD system high-load” is displayed
The indication is dis played under the following conditions. Par k the vehicle in a safe
place and check that the warnin g indication light turns off, and then drive the vehicle.
Contact an expert repairer, we recommend an Authorised Mazda Repairer if the indication
is continuously displayed.
•When the differential oil temp erature is excessively high.•When there is a large difference between the front and rear whe el rotation, such as when
trying to remove the vehicle from mud.
4WD Warning
Light*
When the light is turned on
The light turns on under the following conditions. The system may have a malfunction.
Have the vehicle checked at an expert repairer, we recommend an Authorised Mazda Re-
pairer.
•When there is a malfunction in the 4WD system.•When there is a large difference between the tyre size of the f ront and rear wheels.
When the light is flashing
Park the vehicle in a safe place. After a few moments, if the w arning light stops flashing,
you can resume driving. If the light does not stop flashing, co ntact an expert repairer, we
recommend an Authoris ed Mazda Repairer.
•When the differential oil temp erature is excessively high.•When there is a large difference between the front and rear whe el rotation, such as when
trying to remove the vehicle from mud.
(Turns on)
TCS/DSC Indicator
Light If the light stays on, the TCS, DSC or the brake assist system
may have a malfunction and
they may not operate correctly. Take your vehicle to an expert repairer, we recommend an
Authorised Mazda Repairer.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-49
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning
Air Bag/Seat Belt
Pretensioner System Wa r n i n g L i g h t A system malfunction is indicated
if the warning light constantly flashes, constantly illu-
minates or does not illuminate at all when the ignition is swit ched ON. If any of these
occur, consult an expert repaire r, we recommend an Authorised M azda Repairer as soon
as possible. The system may not operate in an accident.WARNING
Never tamper with the air bag/pretensioner systems and always have an expert repairer,
we recommend an Authorised Mazda Repairer perform all servicing and repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could
accidentally activate or become disa bled causing serious injury or death.
(Flashing)
Tyre Pressure Moni-
toring System Warn-
ing Light
*
If the tyre pressure monitoring system has a malfunction, the t yre pressure warning light
flashes. Have your vehicle check ed by an expert repairer, we recommend an Authorised
Mazda Repairer as soon as possible.
WARNING
If the tyre pressure monitoring system warning light illuminates or flashes, or the tyre pres‐
sure warning beep sound is heard, decrease vehicle speed immediately and avoid sudden
manoeuvring and braking:
If the tyre pressure monitoring system warning light illuminates or flashes, or the tyre pres‐
sure warning beep sound is hear d, it is dangerous to drive the vehicle at high speeds, or
perform sudden manoeuvring or braking. Vehicl e drivability could worsen and result in an
accident.
To determine if you have a slow leak or a flat, pull over to a safe position where you can
check the visual condition of the tyre and determine if you have enough air to proceed to a
place where air may be added and the system monitored agai n by an expert repairer, we
recommend an Authorised Mazda Repairer or a tyre repair station.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is dangerous, even if you know why it is illuminated. Have
the problem taken care of as soon as possible before it develops into a more serious situa‐
tion that could lead to tyre failure and a dangerous accident.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-50*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning
(Amber)
KEY Warning Indi-
cation
*
“Keyless System malfunction” is displayed
This message is displayed if the advanced keyless entry & push button start system has a
problem.
Contact an expert repairer, we recommend an Authorised Mazda Repairer.
CAUTION
If the message is indicated, or the push button start indicator light (amber) flashes, the en‐
gine may not start. If the engine cannot be st arted, try starting it using the emergency oper‐
ation for starting the engine, an d have the vehicle inspected at an expert repairer, we rec‐
ommend an Authorised Mazda Repairer as soon as possible.
Refer to Emergency Operation for St arting the Engine on page 4-10.
“Set Power to OFF” is displayed
This message is displayed when the driver's door is opened with out switching the ignition
off.
“Key not found” is displayed
This message is displayed when a ny of the following operations is performed with the key
out of the operational range or placed in areas inside the cabi n where it is difficult for the
key to be detected.
•The push button start is pressed with the ignition switched off•The ignition is switched on•All doors are closed without switching the ignition off
(Red)
(Turns on)
KEY Warning
Light
*
If any malfunction o ccurs in the keyless entry system, it illum inates continuously.
CAUTION
If the key warning indicator light illuminates or the push button start indicator light (am‐
ber) flashes, the engine may not start. If the engine cannot be started, try starting it using
the emergency operation for starting the engine, and have the vehicle inspected at an ex‐
pert repairer, we recommend an Authoris ed Mazda Repairer as soon as possible.
Refer to Emergency Operation for Starting the Engine on page 4- 10.
Security Indicator
Light If the engine does not start with the correct key, and the secu
rity indicator light remains
illuminated or flashing, try the following:
Make sure the key is within the operational range for signal transmission. Switch the igni-
tion off, and then restart the engine. If the engine does not s tart after 3 or more tries, con-
tact an expert repairer, we reco mmend an Authorised Mazda Repai rer.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-51
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning
(Amber)
i-stop Warning
Light
*
When the light is turned on
A problem in the system may be i ndicated under the following conditions. Have your ve-
hicle inspected at an expert repairer, we recommend an Authoris ed Mazda Repairer.
•The light does not turn on when the ignition is switched ON.•The light continues to remain on even though the i-stop OFF swi tch has been pressed
while the engine is running.
When the light is flashing
The light continues to flash if the system has a malfunction. H ave your vehicle inspected
at an expert repairer, we recommend an Authorised Mazda Repaire r.
i-ELOOP Warning
Indication*
The Warning indication turns on if there is any malfunction in the i-ELOOP system. Con-
sult an expert repairer, we reco mmend an Authorised Mazda Repai rer.
(Amber)
High Beam Control System (HBC)
Wa r n i n g L i g h t
*
The light remains turned on if th ere is a problem with the system. Have your vehicle in-
spected at an expert repairer, we recommend an Authorised Mazda Repairer.
NOTE
If the windscreen area in front of the Forward Sensing Camera (FSC) is fogged or ob-
structed, the light turns on temporarily. If the light remains turned on, there may be a
problem with the system.
(Amber)
Adaptive LED
Headlights (ALH)
Wa r n i n g L i g h t
*
The light remains turned on if th ere is a problem with the system. Have your vehicle in-
spected at an expert repairer, we recommend an Authorised Mazda Repairer.
NOTE
If the windscreen area in front of the Forward Sensing Camera (FSC) is fogged or ob-
structed, the light turns on temporarily. If the light remains turned on, there may be a
problem with the system.
Blind Spot Monitor-
ing (BSM) Warning
Indication
*
This light illuminates if there i s a malfunction in the Blind Spot Monitoring (BSM). Have
your vehicle inspected by an expe rt repairer, we recommend an Authorised Mazda Re-
pairer.
NOTE
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors
can detect, the system may pause. However , it does not indicate a malfunction.
Blind Spot Monitor-
ing (BSM) OFF In-
dicator Light
*
A problem in the system may be i ndicated under the following conditions.
Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda
Repairer.
•The light does not turn on when the ignition is switched ON.•The light remains on even when the Blind Spot Monitoring (BSM) system can be operat-
ed.
•The light turns on while driving the vehicle.
NOTE
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors
can detect, the system may pause (The Bli nd Spot Monitoring (BSM) OFF indicator light
in the instrument cluster illuminates). However, it does not indicate a malfunction.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-52*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning
(Amber)
Driver Attention
Alert (DAA) Warn-
ing Indication
*
The message is displayed when the system has a malfunction. Have your vehicle inspect-
ed at an expert repairer, we r ecommend an Authorised Mazda Repa irer.
(Amber)
Mazda Radar Cruise
Control (MRCC)
Warning Indication
*
The message is displayed when the system has a malfunction. Have your vehicle inspect-
ed at an expert repairer, we r ecommend an Authorised Mazda Repa irer.
(Amber)
Mazda Radar Cruise
Control with Stop &
Go function (MRCC with Stop & Go
function) Warning
Indication
*
The message is displayed when the system has a malfunction. Have your vehicle inspect-
ed at an expert repairer, we r ecommend an Authorised Mazda Repa irer.
(Amber)
Lane-keep Assist System (LAS) & Lane Departure
Wa r n i n g S y s t e m
(LDWS) Warning
Indication
*
The message is displayed when the system has a malfunction. Have your vehicle inspect-
ed at an expert repairer, we r ecommend an Authorised Mazda Repa irer.
The system does not operate when the warning message is displayed.
CAUTION
Always use tyres for all wheels that are of the
specified size, and the same manufacture,
brand, and tread pattern. In addition, do not use tyres with significantly different wear
patterns on the same vehicle. If such improper tyres are used, the system may not oper‐
ate normally.
 When an emergency spare tyre is used, the system may not operate normally.
LED Headlight
Wa r n i n g L i g h t This light illuminates if there i
s a malfunction in the LED hea dlight. Have your vehicle
inspected by an expert repairer , we recommend an Authorised Maz da Repairer.
▼Taking Action
Take the appropriate action and verify that the warning light t
urns off.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-53
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning Action to be taken
(Amber)
Smart Brake Support/
Smart City Brake Sup-
port (SBS/SCBS)
Warning Light
*
The light turns on if the windscreen or the
radar sensor are dirty, or there is a malfunc-
tion in the system. Verify the reason why the warning light is
illuminated on the centre display.
If the reason why the
warning light is illu-
minated is due to a dirty windscreen, clean
the windscreen.
If the warning light is illuminated because
of a dirty radar sensor, clean the front em-
blem.
For any other reasons, have the vehicle in-
spected at an expert repairer, we recom-
mend an Authorised Mazda Repairer.
Low Fuel Warning In- dication/Warning
Light The light turns on when the remaining fuel
is about 9.0 L (2.3 US gal, 1.9 Imp gal).NOTE
The light illumination timing may vary be-
cause fuel inside the fuel tank moves around
according to the driving conditions and the
vehicle posture.
Add fuel.
120km/h Warning
Light*
The 120 km/h warning light illuminates
when the vehicle speed exceeds 120 km/h. Lower the vehicle speed.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-54*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning Action to be taken
Seat Belt Warning
Light (Front seat) The seat belt warning light turns on if the
driver or front passenger's seat is occupied
and the seat belt is not fastened with the ig-
nition switched ON.
If the driver or front passenger's seat belt is
unfastened (only when the front passenger's
seat is occupied) and the vehicle is driven at
a speed faster than abo
ut 20 km/h (12 mph),
the warning light flashes. After a short time,
the warning light stops flashing, but re-
mains illuminated. If a seat belt remains un-
fastened, the warning light flashes again for
a given period of time.
NOTE
•If the driver or front passenger's seat belt
is unfastened after th e warning light turns
on, and the vehicle speed exceeds 20 km/h
(12 mph), the warning light flashes again.
•Placing heavy items on the front passeng-
er's seat may cause the front passenger's
seat belt warning function to operate de-
pending on the weight of the item.
•To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on
the front passenger's seat. The sensor may
not function properly because the addi-
tional seat cushion could cause sensor in-
terference.
•If a small child is seated on the front pas-
senger's seat, the warning light may not
operate. Fasten the seat belts.
(Red)
Seat Belt Warning
Light (Rear seat)
*
If the rear seat belts are not fastened while
the ignition is switched ON , the driver and
the passenger are alerted by the warning
light.
The warning light opera tes even if there is
no passenger on the rear seat.
NOTE
If a rear seat belt is not fastened by a cer-
tain period of time after the engine has
been started, the warning light turns off. Fasten the seat belts.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-55
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2