2011 Lexus CT200h Owner's Manual (in English)

537
4-3. Do-it-yourself maintenance
4
Maintenance and care
CT200h_EE (OM76041E)Turn the bulb base counter-
clockwise.
Headlight high beams (halogen headlights)
For the right side only: Move
the washer fluid filler opening.
Unplug the connector while
pressing the lock release.
Turn the bulb base counter-
clockwise.
STEP3
STEP1
STEP2
STEP3

538
4-3. Do-it-yourself maintenance
CT200h_EE (OM76041E)Headlight high beams (LED headlights)
For the right side only: Remove the securing clips and
unclip the engine coolant reservoir hose. Then lift up the air
cleaner inlet duct. (P. 536)
Turn the cover counterclock-
wise and remove it.
Turn the bulb base counter-
clockwise.
Unplug the connector while
pulling the lock release.
STEP1
STEP2
STEP3
STEP4

539
4-3. Do-it-yourself maintenance
4
Maintenance and care
CT200h_EE (OM76041E)Front fog lights (if equipped)
Remove 2 screws, a bolt and a
clip, and pull down the engine
under cover.
Pull the cover down slowly,
being careful not to dislodge
any fixed components.
Unplug the connector while
pressing the lock release.
Turn the bulb base counter-
clockwise.
STEP1
STEP2
STEP3

540
4-3. Do-it-yourself maintenance
CT200h_EE (OM76041E)Front turn signal lights (halogen headlights)
For the right side only: Remove the securing clips and
unclip the engine coolant reservoir hose. Then lift up the air
cleaner inlet duct. (P. 536)
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3

541
4-3. Do-it-yourself maintenance
4
Maintenance and care
CT200h_EE (OM76041E)Front turn signal lights (LED headlights)
Left side
Remove the power control unit
cover.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3

542
4-3. Do-it-yourself maintenance
CT200h_EE (OM76041E)Right side
Move the washer fluid filler opening. (P. 537)
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3

543
4-3. Do-it-yourself maintenance
4
Maintenance and care
CT200h_EE (OM76041E)Rear turn signal lights
Open the back door and remove
the covers and bolts, and
remove the lamp assembly by
pulling it directly backward
from the rear of the vehicle.
Use a flathead screwdriver
wrapped in a cloth.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3

544
4-3. Do-it-yourself maintenance
CT200h_EE (OM76041E)Back-up light/rear fog light
Open the back door and remove
the cover.
Use a flathead screwdriver
wrapped in a cloth.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
The illustrations show the removal of a back-up light from a right-
hand drive vehicle.
STEP1
STEP2
STEP3