1996 HONDA CIVIC Workshop Manual

Page 1457 of 2189

HONDA CIVIC 1996 6.G Workshop Manual Clutch InsPection
Check the plated parts of the armature plate for color
changes, peeling or other damage lf there is dam-
age. replace the clutch set.
Check the rotor pulley bearing play and drag by

Page 1458 of 2189

HONDA CIVIC 1996 6.G Workshop Manual Compressor {SANDEN)
Clutch Overhaul
1. Remove the center nut while holding the armatureplate with the tool.
CENTER NUT17.6 N.m {1.8 kg{.m,t3 tbnft}
2. Remove the armature plate by pulling it up by ha

Page 1459 of 2189

HONDA CIVIC 1996 6.G Workshop Manual 5. Remove the screw from the field coil ground termi-
nal, then disconnect the field coil connector.
Remove snap ring A with snap ring pliers, then
remove the field coil
NOTE:
. Be careful not to dama

Page 1460 of 2189

HONDA CIVIC 1996 6.G Workshop Manual Compressor (SANDENI
Thermal Protestor Replacement
1. Remove the bolt, the ground terminal and the hold-er. Disconnect the field coil connector. then removethe thermal Drotector.
7.{ N.m 10.75 ksf.m,5l

Page 1461 of 2189

HONDA CIVIC 1996 6.G Workshop Manual Compressor (DENSO)
Replacement
1.lf the compressor is marginally operable, run the
engine at idle speed, and let the air conditioning work
for a few minutes, then shut the engine off
Disconnect the ne

Page 1462 of 2189

HONDA CIVIC 1996 6.G Workshop Manual Compressor (DENSOI
Replacement (contd)
9. Remove the bolts, the suction service valve and theO-ring from the compressor,
lf necessary, remove the compressor bracket as fol-lows.
. Remove the nut and

Page 1463 of 2189

HONDA CIVIC 1996 6.G Workshop Manual lllustrated Index
).-
CENTER BOLT
PBESSURE PLATE
Inspection, Page 22 40
sHrM(s)
SNAP RING B
Replace.
PULLEYInspection, Page 2240
SNAP RING A
Replace.
FIELD COILInspection, page 22 40
SUCTION SERVICE

Page 1464 of 2189

HONDA CIVIC 1996 6.G Workshop Manual Compressor (DENSOI
Clutch Inspection
Check the plated parts of the pressure plate for colo.changes, peeling or other damage. lf there is dam-age, replace the clutch set.
Check the pulley bearing play