2020 MITSUBISHI ASX Owner's Manual (in English)

To stop the system, turn the blower speed se-
lection dial to the “OFF” position.NOTEz While the engine coolant temperature is low,
the temperature of the air from the heater will be cool/cold until the engine warms up, even if you have selected warm air with the
dial. To prevent the windscreen and win- dows from fogging up, the ventilator mode
will be changed to “
” and the blower
speed will be reduced.
z If the blower speed selection dial, air condi-
tioning switch, mode selection dial, or air se-
lection switch is operated while the system is operating in the AUTO mode, the activa-ted function overrides the corresponding
function of automatic control. All other
functions remain under automatic control.
Manual mode (Automatic air
conditioning)
Blower speed and ventilator mode may be
controlled manually by setting the blower
speed selection dial and the mode selection dial to the desired positions. To return to au-
tomatic operation, set the dials to the “AU- TO” position.
Demisting of the windscreen
and door windowsCAUT,ONz For safety, make sure you have a clear view
through all the windows.
Use the mode selection dial (“” or “”)
to remove frost or mist from the windscreen or door windows.
For ordinary demisting
Perform the following settings to prevent
misting of the windscreen and door windows,
and to heat the leg area.
1. Set the air selection switch (A) to the
outside position.
2. Set the mode selection dial to the “
”
position.
3. Select your desired blower speed by
turning the blower speed selection dial.
4. Select your desired temperature by turn-
ing the temperature control dial.
5. Push the air conditioning switch (B).
For quick demisting
1. Set the mode selection dial to the “”
position.
2. Set the blower to the maximum speed. 3. Set the temperature to the highest posi-
tion.
Air conditioning
7-092*$(20(1For pleasant driving7 Manual air conditioning
Automatic air conditioning Manual air conditioning
Automatic air conditioning

NOTEzWhen the mode selection dial is in the “”
position, the system operates automatically
and outside air is set automatically.
z To demist effectively, direct the air flow
from the side ventilators towards the door
windows.
z Do not set the temperature control dial to the
max. cool position. Cool air will blow against the window glasses and prevent de-
misting.
z For vehicles with the Auto Stop & Go
(AS&G) system, if the mode selection dial is
set to the demister position shown in the il- lustration, the AS&G system will not oper- ate and the engine will not stop automatical-
ly even if the vehicle is stopped. This is to ensure that good visibility is maintained.Introduction of outside air
(Manual air conditioning)
To introduce air into the vehicle during hot weather, set the air selection switch (A) to theoutside position and set the temperature con-
trol dial to the positions shown in the illustra- tion. Be sure to set the temperature control dial all the way to the left. Select the desiredblower speed.
NOTEz Turn the mode selection dial clockwise and
air will flow to the leg area and the wind-
screen.Important operation tips for
the air conditioning
z Park the vehicle in the shade.
Parking in the hot sun will make the ve-
hicle inside extremely hot, and it will re-
quire more time to cool the interior.
If it is necessary to park in the sun, open the windows for the first few minutes of
air conditioning operation to expel the
hot air.
z Close the windows when the air condi-
tioning is in use. The entry of outside air
through open windows will reduce the cooling efficiency.
z Too much cooling is not good for the
health. Keep the difference between the
vehicle interior temperature and outside temperature at 5 to 6

Air conditioning system refrig-erant and lubricant recommen-dations
If the air conditioning seems less effective
than usual, the cause might be a refrigerant leak. We recommend you to have the systeminspected.
The air conditioning system in your vehicle
must be charged with the refrigerant HFO-1234yf (Except for vehicles for Moldo-
va and Ukraine) or HFC-134a (Vehicles for
Moldova and Ukraine) and the lubricant
PAG46A (Except for vehicles for Moldova
and Ukraine) or SUN-PAG56 (Vehicles for
Moldova and Ukraine).
Use of any other refrigerant or lubricant will
cause severe damage which will result in the need to replace your vehicle

Important Points on Usage
iPod/iPhone Playback Func-tion*
z This product supports audio playback
from iPod/iPhone devices, however dif- fering versions mean that playback can-not be guaranteed.
z Please be aware that depending on the
iPod/iPhone model or version, operation may differ.
How to Clean
z If the product becomes dirty, wipe with a
soft cloth.
z If very dirty, use a soft cloth dipped in
neutral detergent diluted in water, and
then wrung out. Do not use benzene,
thinners, or other chemical wipes. This may harm the surface.
Trademarks
z Product names and other proper names
are the trademarks or registered trade-marks of their respective owners.
z Furthermore, even if there is no specific
denotation of trademarks or registered
trademarks, these are to be observed in their entirety.
“Made for iPod,” “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone, respectively, and hasbeen certified by the developer to meet
Apple performance standards.
iPhone, iPod, iPod classic, iPod nano,
and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries.
Apple is not responsible for the opera- tion of this device or its compliance with
safety and regulatory standards.
NOTEz iPod and iTunes licensing allows individual
users to privately reproduce and play back
non- copyrighted material as well as material
that may be legally copied and reproduced.
Infringement of copyright is prohibited.NOTEz For vehicles with a Bluetooth

5th generation
(video)5th generation
(video)6th generation5th generation
(video camera)4th generation (video)1st generation2nd generation
(aluminium)3rd generation
(video)
LW/MW/FM radio/CD player*
7-132*$(20(1For pleasant driving7

Handling of Discs
This explains care that should be taken in thehandling of discs.
Important Points on Handling
z Fingerprints or other marks on the read
surface of the disc may result in its con-
tent being more difficult to read. When
holding the disc, grip both edges, or one edge and the centre hole, in order that
the read surface is not touched.
z Do not affix paper or stickers, or other-
wise damage the disc.
z Do not forcefully insert a disc if another
is already within the device. This can re-
sult in damage to discs, or malfunction.
Cleaning
z Periodically clean the read surface of the
disc. When cleaning, do not wipe in a
circular motion. Instead, wipe gently outwards from the centre of the disc to
the outer edge.
z New discs may have burring around the
outer edge or in the hole in the centre. Ensure you check for these. If there are
burrs, these may lead to faulty operation,
therefore ensure these are removed.
Important Points on Storage
z When not using discs, ensure these are
kept in cases, and stored out of direct
sunlight.
z If discs are not going to be used for a
long period of time, remove these from
the product.
Disc Playback Environment
In cold environments such as in mid-winter when the interior of the vehicle is cold, turn-ing the heater on and immediately trying to
use the product may cause condensation (wa-
ter droplets) to form on the disc and internal optical components, and this may prevent the product from operating correctly.
In these conditions, remove the disc, and wait
a short time before use.
Copyright
Actions such as unauthorized reproduction,broadcast, public performance, or rental ofdiscs that comprise other than personal use
are prohibited by law.
Types of Disc That Can Be
Played Back
The following marks are printed on the disc
label, package, or jacket.
Handling of Discs
7-142*$(20(1For pleasant driving74th generation
8GB 32GB 64GB3rd generation
32GB 64GB
2nd generation
8GB 16GB 32GB 1st generation
8GB 16GB 32GB
16GB 32GB 64GB
8GB 16GB 32GB 8GB 16GB 16GB 32GB

TypeSize
Maxi-mumplay- back time
Comments
CD-DA12 cm74 mi-
nutes—CD-
TEXT12 cm74 mi-
nutes—CD-
R/RW12 cm—

There are limitations on the files and mediathat can be used, therefore read the following prior to recording MP3/WMA/AAC format
audio files on discs or USB devices. Addi- tionally, ensure you read the user manuals for
your CDR/RW drive and the writing soft- ware, and ensure these are used correctly.
If the MP3/WMA/AAC format audio files in-
cludes title information or other data, then
this can be displayed.CAUT,ONz CD-ROM and CD-R/RW media can only
play back MP3 format audio files.
z Actions such as copying audio CDs or files
and either distributing these to others for free or for charge, or uploading files via the Internet or other means to servers is an in-
fringement of the law.
z Do not append the file extensions “.mp3”,
“.wma”, or “.m4a”, to other than
MP3/WMA/AAC format files. Playing back discs with these types of files recorded upon
them may cause the files to be incorrectly
identified for playback, which may lead to
loud noise, resulting in speaker damage or accident.NOTEz Depending on the condition of the disc re-
corder or recording software used, correct
playback may not be possible. In these ca- ses, refer to the user manual for your product or software.
z Depending on your computer