2020 MITSUBISHI ASX Owner's Manual (in English)

2.Lightly press the multi-information me-
ter switch to select “
” (changing the
turn-signal sound).
3. Press and hold the multi-information
meter switch for approximately 2 sec-
onds or more to switch in sequence from 1 (turn-signal sound 1)
W (turn-signal
sound 2)
W 1 (turn-signal sound 1).
The setting changes to the selected turn- signal sound.
Changing the momentary fuel
consumption display
It is possible to change the bar graph setting
of the momentary fuel consumption display.
1. Press and hold the multi-information
meter switch for approximately 2 sec-
onds or more to switch from the setting mode screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera-
tion mode is ON)” on page 5-17.
2. Lightly press the multi-information me-
ter switch to select “
” (changing the
momentary fuel consumption display)
3. Press and hold the multi-information
meter switch for approximately 2 sec-
onds or more to switch in sequence from ON (with the green bar graph)
W OFF (without the green bar graph)
W ON
(with the green bar graph).
The setting changes to the selected bar
graph setting.
Returning to the factory set-
tings
Many of the function settings can be returned
to their factory settings. 1. Press and hold the multi-information
meter switch for approximately 2 sec-
onds or more to switch from the setting mode screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera-
tion mode is ON)” on page 5-17.
2. Lightly press the multi-information me-
ter switch to select “RESET” (returning to the factory settings).
3. When you press and hold the multi-in-
formation meter switch for approximate- ly 5 seconds or more, the buzzer sounds
and all of the function settings are re- turned to the factory settings.
Multi-information display
5-232*$(20(1Instruments and controls5

NOTEzThe factory settings are as follows.

5- Front fog lamp indication lamp*o p. 5-44
6- Rear fog lamp indication lamp o p. 5-44
7- Forward Collision Mitigation system (FCM) indicator* o p. 6-49
Radar sensing misacceleration Mitiga-
tion System (RMS) (Forward) indicator*
o p. 6-59
8- Tyre pressure monitoring system warn- ing lamp* o p. 6-749- Brake warning lamp o p. 5-44
10- Cruise control indication lamp* o p. 6-45
11- Seat belt warning lamp o p. 4-11
12- Supplement Restraint System (SRS) warning lamp o p. 4-34
13- Automatic High-Beam (AHB) indicator* o p. 5-50
14- Check engine warning lamp o p. 5-44
15- Active Stability Control (ASC) OFF in- dicator* o p. 6-4316- Active Stability Control (ASC) indica-
tor* o p. 6-43
17- Forward Collision Mitigation system (FCM) OFF indicator* o p. 6-54
Radar sensing misacceleration Mitiga-
tion System (RMS) (Forward) OFF indi-
cator* o p. 6-63
18- Information screen display list o p. 5-25
19- Anti-lock brake system (ABS) warning lamp o p. 6-40

Information screen display list
When there is information to be announced, such as lamp reminders, a sound is emitted and the screen switches to the displays shown below.
Refer to the appropriate page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes out automatically.
Refer to “Warning display list (when the ignition switch or the operation mode is OFF)” on page 5-26.
Refer to “Warning display list (when the ignition switch or the operation mode is ON)” on page 5-29.
Refer to “Other interrupt displays” on page 5-40.
NOTEz A warning may be displayed on the information screen and the buzzer may sound in the following rare cases.
This is caused by the system picking up interference such as noise or strong electromagnetic waves, and is not a functional problem.

Warning display list (when the ignition switch or the operation mode is OFF)ScreenCauseSolution (Reference)zYou have forgotten to turn off the lamps.zRefer to “Lamps (headlamps, fog lamp,
etc.) auto-cutout function” on page 5-46.z The security alarm system is operating.z Refer to “Security alarm system” on page
3-33.
Indication lamp, warning lamp, and information screen display list
5-262*$(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThere is a fault in the keyless operation
system.z Refer to “Keyless operation system” on
page 3-08.z There is a fault in the electronic immobil-
izer (Anti-theft starting system).z We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
Indication lamp, warning lamp, and information screen display list
5-272*$(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThe keyless operation key is not detected.zInsert the keyless operation key into the
key slot in the glove box.
Refer to “If the keyless operation key is not operating properly” on page 3-20.z You have forgotten to remove the keyless
operation key from the key slot in the
glove box.z Remove the keyless operation key from
the key slot in the glove box.z The steering wheel is locked.z Press the engine switch.
Refer to “Steering wheel lock” on page
3-17.z The engine is stopped while the selector
lever is in a position other than the “P” (PARK) position.z On vehicles with CVT, move the selector
lever to the “P” (PARK) position to put
the operation mode in OFF.z The driver

ScreenCauseSolution (Reference)zThere is a fault in the electrical system.z Immediately stop the vehicle in a safe
place. We recommend you to consult a MITSUBISHI MOTORS Authorized
Service Point.

Warning display list (when the ignition switch or the operation mode is ON)ScreenCauseSolution (Reference)
(if so equipped)
z The washer fluid is running low.zReplenish the container with washer fluid.
Refer to “Washer fluid” on page 10-06
Refer to “Capacity” on page 11-11.z There is a fault in the EPS.z Have the vehicle inspected by a
MITSUBISHI MOTORS Authorized
Service Point as soon as possible.
Refer to “Electric power steering system (EPS)” on page 6-26.
Indication lamp, warning lamp, and information screen display list
5-292*$(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThere is a fault in the keyless operation
system.z Refer to “Keyless operation system” on
page 3-08.
Indication lamp, warning lamp, and information screen display list
5-302*$(20(1Instruments and controls5