Page 217 of 291

IN AN EMERGENCY215
4
With gas discharge bulbs (Xenon)
(for versions/markets, where provided)
MAIN BEAM HEADLIGHTS
With incandescent bulbs
To change the bulb, proceed as follows:
❍remove the protective cover A - fig. 15;
❍ release the bulb holder clip A - fig. 17;
❍ disconnect the electrical connector B;
❍ remove the bulb C and replace it;
❍ fit the new bulb, ensuring that the outline of the met-
al part coincides with the splining on the curve of the
headlight. Then reconnect the electrical connector B
and reattach the bulb holder clip A;
❍ refit the protective cover A - fig. 15.
fig. 17L0E0156m
Due to the high power supply voltage, gas
discharge bulbs (Xenon) should only be re-
placed by specialised personnel: danger of
death! Contact a Lancia Dealership.
With gas discharge bulbs (Xenon)
(for versions/markets, where provided)
Due to the high power supply voltage, gas
discharge bulbs (Xenon) should only be re-
placed by specialised personnel: danger of
death! Contact a Lancia Dealership.
195-232 Delta GB 1ed 03/03/14 09.15 Pagina 215
Page 218 of 291
216IN AN EMERGENCY
SIDE LIGHTS/DAYTIME RUNNING LIGHTS
The side lights/daytime running lights are LED-type.
Contact a Lancia Dealership to have these lights replaced.
DIRECTION INDICATORS
Front
To replace the bulb, proceed as follows:
❍remove the protective cover C - fig. 15;
❍ press down near the bulb holder locking tabs (shown
in fig. 18 by the arrows) and simultaneously pull the
unit;
❍ remove the bulb A and replace it;
❍ refit the protective cover C. Side
To replace the bulb, proceed as follows:
❍
work on the lens cover A - fig. 19 to compress inter-
nal clip B, then pull the unit outwards;
❍ turn the bulb holder C anticlockwise, extract the press-
fitted bulb D and replace it;
❍ refit the bulb holder C in the lens cover and turn it
clockwise;
❍ refit the unit making sure that the internal clip B clicks
into place.
fig. 18L0E0157mfig. 19L0E0158m
195-232 Delta GB 1ed 03/03/14 09.15 Pagina 216
Page 219 of 291
IN AN EMERGENCY217
4
FOG LIGHTS fig. 20
(for versions/markets, where provided)
To replace the front fog light bulbs contact a Lancia Deal-
ership.
REAR LIGHT CLUSTERS
Contact a Lancia Dealership to replace the LED lights in
the rear light clusters.
REVERSING LIGHT fig. 21
Go to a Lancia Dealership to replace the bulb.REAR FOG LIGHT fig. 22
Go to a Lancia Dealership to replace the bulb.
fig. 20L0E0159mfig. 22L0E0161m
fig. 21L0E0160m
195-232 Delta GB 1ed 03/03/14 09.15 Pagina 217
Page 220 of 291
218IN AN EMERGENCY
THIRD BRAKE LIGHT fig. 23
Contact a Lancia Dealership to replace the third brake
LED lights.
NUMBER PLATE LIGHTS
To replace the bulb proceed as follows:
❍remove the lens units A - fig. 24 by acting on the points
shown by the arrows;
❍ remove the bulb B and replace it.
fig. 23L0E0162mfig. 25L0E0282m
fig. 24L0E0163m
195-232 Delta GB 1ed 03/03/14 09.15 Pagina 218
Page 221 of 291
IN AN EMERGENCY219
4
fig. 27L0E0166m
fig. 26L0E0165m
REPLACING AN INTERIOR BULB
For the type of bulb and power rating, see the “Bulb types”
paragraph.FRONT ROOF LIGHT
Proceed as follows to replace the bulbs:
❍
remove the roof light A - fig. 26 by acting on the points
shown by the arrows;
❍ open the protective flap B - fig. 27;
❍ replace the bulbs C releasing them from the side con-
tacts and making sure that the new bulbs are correct-
ly secured between the contacts;
❍ close flap B - fig. 27 and fasten the roof light A - fig.
26 in its housing, making sure it is locked correctly.
IMPORTANT In some versions, the roof light in fig. 26 is
at the back (electric sun roof version). To replace the rel-
evant bulbs, refer to the procedure described in paragraph
“Rear roof light” in this chapter.
195-232 Delta GB 1ed 03/03/14 09.15 Pagina 219
Page 222 of 291
220IN AN EMERGENCY
fig. 28L0E0167mfig. 30L0E0169m
fig. 29L0E0168m
REAR ROOF LIGHT
Versions without sun roof
Proceed as follows to replace the bulbs:
❍work at the point shown by the arrow and remove roof
light A - fig. 28;
❍ replace bulb B - fig. 29 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.
Versions with sun roof
To replace the bulb, proceed as follows:
❍ work at the point shown by the arrow and remove roof
light A - fig. 30; ❍
replace bulb B - fig. 29 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.
195-232 Delta GB 1ed 03/03/14 09.15 Pagina 220
Page 223 of 291
IN AN EMERGENCY221
4
fig. 32L0E0171mfig. 33L0E0172m
LUGGAGE COMPARTMENT LIGHT
To replace the bulb, proceed as follows:
❍open the luggage compartment;
❍ remove the light A - fig. 32 applying leverage at the
point shown by the arrow;
❍ open protection B - fig. 33 and replace the press-fitted
bulb; ❍
close protection B onto the lens cover;
❍ refit the light A by inserting it in its correct position
firstly on one side and then on the other until it clicks
into place.
195-232 Delta GB 1ed 03/03/14 09.15 Pagina 221
Page 224 of 291
222IN AN EMERGENCY
fig. 34L0E0173mfig. 36L0E0175m
fig. 35L0E0174m
GLOVE COMPARTMENT LIGHT
To replace the bulb, proceed as follows:
❍open the glove compartment, and remove the light
A - fig. 34;
❍ replace bulb B releasing it from the side contacts and
making sure the new bulb is correctly fastened between
the contacts.
COURTESY MIRROR LIGHT
(for versions/markets, where provided)
To replace the bulb, proceed as follows:
❍ open the cover A - fig. 35 on the mirror;
❍ applying leverage at the points shown by the arrows,
remove light B; ❍
replace bulb C - fig. 36 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.
195-232 Delta GB 1ed 03/03/14 09.15 Pagina 222