2015 Lancia Delta Owner handbook (in English)

MAINTENANCE AND CARE255
Windows
Use specific detergents and clean cloths to prevent scratch-
ing or altering the transparency.
IMPORTANT Wipe the inside surface of the rear window
gently with a cloth in the direction of the filaments to avoid
damaging the heater coils.
Engine compartment
At the end of each winter, thoroughly wash the engine
compartment, taking care to avoid spraying the water jet
directly onto the electronic control units and the relay/fuse
box on the left side of the engine compartment (driving
direction). Have this operation performed at a specialised
workshop.
IMPORTANT The washing should take place with the en-
gine cold and the ignition key in the STOP position. After
the washing operation, make sure that the various protec-
tions (e.g. rubber caps and guards) have not been removed
or damaged.Front headlights
Use a soft cloth soaked in water and detergent for wash-
ing cars.
IMPORTANT Never use aromatic substances (e.g. petrol)
or ketones (e.g. acetone) for cleaning the plastic lenses of
the front headlights.
IMPORTANT When cleaning the car with a pressure wash-
er, keep the water jet at least 20 cm away from the head-
lights.
233-256 Delta GB 1ed 03/04/14 13:28 Pagina 255

256MAINTENANCE AND CARE
INTERIORS
Periodically check that water is not trapped under the mats
(due to water dripping off shoes, umbrellas, etc.) which
could cause oxidisation of the sheet metal.
Never use flammable products, such as
petrol ether or rectified petrol to clean the
inside of the car. The electrostatic charges
which are generated by rubbing during cleaning
may cause a fire.
Do not keep aerosol cans in the vehicle: these
could explode. Aerosol cans must not be ex-
posed to temperatures exceeding 50°C. When
the vehicle is exposed to sunlight, the temperature
inside can greatly exceed this value.
SEATS AND FABRIC PARTS
Remove dust with a soft brush or a vacuum cleaner. It is
advisable to use a moist brush on velvet upholstery.
Rub the seats with a sponge moistened with a solution of
water and neutral detergent.
PLASTIC PARTS
It is advisable to clean interior parts with a moist cloth and
a solution of water and non-abrasive mild soap. Use spe-
cific products for cleaning plastic, without solvents and
specifically designed to prevent damage to the appearance
and colour of the treated parts, to remove grease and tough
stains.
IMPORTANT Do not use alcohol, petrols or derivatives to
clean the instrument panel lens.
233-256 Delta GB 1ed 03/04/14 13:28 Pagina 256

6
TECHNICAL SPECIFICATIONS257
Identification data ........................................................... 258
Engine codes - bodywork versions .................................... 260
Engine ........................................................................\
.... 261
Fuel supply syst em .......................................................... 262
Transmission ................................................................... 262
Brakes ........................................................................\
..... 263
Suspension ...................................................................... 263
Steering .......................................................................\
... 263
Wheels ........................................................................\
.... 264
Dimensions ..................................................................... 269
Performance ................................................................... 270
Weights .......................................................................\
.... 271
Capacities .......................................................................\
272
Fluids and lubr icants ...................................................... 273
Fuel consumpt ion ........................................................... 275
CO
2emissions ................................................................. 276
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 257

258TECHNICAL SPECIFICATIONS
IDENTIFICATION DATA
The vehicle identification details are, fig. 1:
1 V.I.N. plate (located in the engine compartment, to theside of the right shock absorber upper mounting);
2 Bodyshell marking (located on the passenger compart- ment floor, next to the passenger side front seat);
3 Bodywork paint identification plate (located on the in- side of the tailgate);
4 Engine marking (located on the left rear section, gear- box side). V.I.N. PLATE fig. 2
This plate is fitted to the engine compartment front cross-
member and contains the following data:
B Type-approval number.
C Vehicle type identification code.
D Chassis number.
E Maximum authorised weight of vehicle fully laden.
F Maximum authorised weight of vehicle fully laden plus
trailer.
G Maximum authorised weight on first axle (front).
H Maximum authorised weight on second axle (rear).
I Engine type.
L Bodywork version code.
M Spare parts number.
N Correct value of smoke coefficient (for diesel engines)
fig. 1L0E0116mfig. 2L0E0117m
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 258

TECHNICAL SPECIFICATIONS259
6
CHASSIS MARKING fig. 3
This is printed on the passenger compartment floor, next
to the front right seat. Slide flap A forward to access.
The marking includes:
❍vehicle type (ZAR 844000)
❍ chassis number BODYWORK PAINT IDENTIFICATION
PLATE fig. 4
This plate is applied inside the bonnet and shows the fol-
lowing data:
A Paint manufacturer.
B Colour name.
C Lancia colour code.
D Respray and touch-up colour code.
ENGINE MARKING
Engine marking is stamped on the cylinder block and in-
cludes the model and the chassis serial number.
fig. 3L0E0118mfig. 4L0E0119m
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 259

844A3000
198A2000844AXP1A 13B
844AXP1A 13C (*)
844AXC1A 02L
844AXC1A 02M (*)
260TECHNICAL SPECIFICATIONS
ENGINE CODES - BODYWORK VERSIONS
VERSIONS ENGINE CODEBODYWORK VERSION
1.6 Multijet 105 HP
1.6 Multijet 120 HP
(*) Versions where 18” tyres may be fitted
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 260

844A3000Diesel
4 in line
79.5 × 80.5 1598
16.5
± 0.4
77
105
4000
300 31
1500
Diesel fuel for
motor vehicles
(EN590 specification)
198A2000
Diesel
4 in line
79.5 × 80.5 1598
16.5
± 0.4
88
120
4000
300 31
1500
Diesel fuel for
motor vehicles
(EN590 specification)
TECHNICAL SPECIFICATIONS261
6
ENGINE
GENERAL INFORMATION 1.6 Multijet 105 HP1.6 Multijet 120 HP
Type code
Cycle
Number and arrangement of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Max. power (EC) kW
HP
corresponding speedrpm
Max. torque (EC) Nm
kgm
corresponding speed rpm
Fuel
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 261

262TECHNICAL SPECIFICATIONS
FUEL SUPPLY SYSTEM
Common Rail MultiJet direct injection electronically controlled with turbo and intercooler
Modifications or repairs to the fuel supply system that are not carried \
out properly or do not take the
system’s technical specifications into account can cause malfunctions leading t\
o the risk of fire.
Fuel supply system
Six forward speed plus reverse with synchronisers for the engagement of the forward speedsSelf-adjusting pedal without idle strokeFront
TRANSMISSION
Gearbox
Clutch
Drive
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 262