2013 SSANGYONG KORANDO Service Manual

8710-01
Operating process
- IGN OFF (ignition key removed)

Tail lamp AUTO switching off
The tail lamp relay is turned ON or OFF according to the ON/OFF operation of the tail lamp switch. A. Operation 1.
When the ignition is turned OFF or the ignition key is turned to the ACC ON position (ignition key
removed) with the tail lamp switch ON.
After this, the tail lamp relay is turned OFF automatically when the driver door is opened and then
closed. (with tail lamp switch ON) B.
C. Operation 2.
When the ignition is turned ON (ignition key inserted) after the operation 2, the tail lamp relay is turned
ON. D. Operation 3.
The ignition is turned OFF or the ACC is turned ON (ignition key removed).
After the tail lamp is turned ON, the lamp relay is not turned OFF automatically when the driver door is
opened and then closed. (with tail lamp switch ON) E.
F. Operation 4.
To reset, turn the ignition ON (ignition key inserted)

8710-01
Operating process
- IGN OFF (ignition key removed)

Door ajar warning lamp
7. DOOR AJAR WARNING LAMP CONTROL
When the door ajar signal is input while the vehicle is driven at 10 km/h or less (V2).
The door ajar warning lamp comes on. A.
B. Operation 1.
The door ajar warning lamp is ON.
The vehicle is driven at 10 km/h or more (V1) for 2 seconds or longer (T1).
The door ajar warning lamp starts to flash. C.
D.
E. Operation 2.
The warning lamp remains on when the vehicle speed decreases to 10 km/h or less (V2). F. Operation 3.
(The warning lamp flashes under the condition of operation 2.)
Operation 4.
The door ajar warning lamp flashes.
The lamp goes out when the open door is closed.
The lamp flashes again whenever a door is opened. G.
H.
I.The door ajar warning lamp goes out when the open door is closed under the condition stated
above. -
The door ajar warning lamp goes out when the open door is closed under the condition stated
above. -

8710-01
Operating process
- IGN ON

Seat belt internal buzzer (chime) and warning lamp
The ignition is turned ON from OFF with the driver and passenger seat belts unbuckled.
The internal buzzer (chime) sounds and the warning lamp comes on for 6 seconds (T2).
(internal buzzer controlled by BCM, warning lamp controlled by instrument cluster) A.
B. Operation 1.
The ignition is turned ON from OFF with the driver and passenger seat belts unbuckled.
The internal buzzer (chime) does not sound but the warning lamp comes on for 6 seconds (T2).
(The seat belt reminder is operated when the vehicle is driven at 10 km/h (for EU), 25 km/h (for GEN)) C.
D. Operation 2.
When the fastened driver seat belt is unbuckled with IGN ON.
The internal buzzer (chime) sounds and the driver seat belt warning lamp comes on for T2 again. E.
F. Operation 3.
The ignition is turned OFF while the internal buzzer (chime) and seat belt warning lamp are activated.
The internal buzzer (chime) and seat belt warning lamp are deactivated. G.
H. Operation 4.
8. SEAT BELT CONTROL
The driver seat belt is fastened while the internal buzzer (chime) and seat belt warning lamp are
activated.
The internal buzzer (chime) does not sound but the warning lamp comes on for the time remaining. I.
J. Operation 5.
When the seat belt reminder operation conditions are met during the warning, the seat belt reminder
is operated after stopping the warning output.
For the passenger seat, however, the system detects if the passenger seat is empty or occupied
and operates the warning lamp only for the first time. After that, the only seat belt reminder detects if
the passenger seat is occupied. -
-

8710-01

Seat belt reminder operation
A
BIf the seat belt is fastened after the seat belt reminder is activated, the output of the reminder is
turned OFF immediately. The reminder will be operated again whenever the seat belt is
unbuckled.
CWhen the seat belt reminder is activated initially with the seat belt unbuckled, the internal buzzer
(chime) is turned ON for 0.02 seconds and then turned OFF for 1.18 seconds (this cycle
continues for 5 minutes) and the driver seat belt warning lamp on the instrument cluster remains
on.
DWhen the seat belt reminder is activated with the seat belt unbuckled, the internal buzzer (chime)
is turned ON for 0.02 seconds and then turned OFF for 1.18 seconds (this cycle continues for 5
minutes) and the passenger seat belt warning lamp on the instrument cluster remains on, after
detecting that the passenger seat is occupied through the input value of the passenger seat
occupancy sensor.
EWhen the vehicle speed is changed while the seat belt reminder is turned on, the internal buzzer
(chime) is operated as follows:
FPriority of internal buzzer (chime) operation
(Seat belt reminder > ignition key reminder > sunroof warning > tail lamp warning > hazard
warning flasher on > turn signal indicator)GEN
The seat belt reminder is operated when the
vehicle is driven at 25 km/h or more with IGN
ON and alternator in High status (engine
running), and driver seat belt is not fastened. If
the vehicle speed is decreased to less than 25
km/h within 5 minutes after the seat belt
reminder is activated, the internal buzzer
(chime) is turned off. If the vehicle speed is
increased to 25 km/h or more, the buzzer
signal is output for 5 minutes. Only EU If the driver and passenger seat belts are not
fastened with the ignition switch ON, engine
running, vehicle speed above 10 km/h and
any passenger occupied, the seat belt
reminder is activated. In addition, even though
the vehicle speed reduces to below 10 km/h
after the reminder is activated at speed of 10
km/h or higher, it will remain activated.
Vehicle speedFunction
Remarks
Interior buzzerInstrument
cluster
25 Km/h to 49 Km/h
(10km/h~49km/h)0.02 sec. ON / 1.18 sec. OFF Remains on (Only EU)
50 Km/h to 99 Km/h 0.02 sec. ON / 0.98 sec. OFF Remains on
100 km/h or more 0.02 sec. ON / 0.78 sec. OFF Remains on